@btmerz I am not familiar with fham, but see if V_KWH works. For Ah it would (technically) be incorrect, but I think the display and aggregegation would work anyway.

@hermann-kaiser said in SmartSleep and FHEM - does it work?: There is a new maintainer for the module in fhem. He implemented a lot of new stuff and also the smartsleep feature. For example nodes are now showing if they are sleeping. Also messages to the nose are delayed till it wakes up the next time. I'm not exactly "a new maintainer", just an additional one . But imo MySensors@FHEM indeed has made "some progress" the last months including OTA update ability (code was mainly contributed by someone else). So expect some more things to come soon. Next will be the attrTemplate feature included in FHEM's setExtensions. This will help to easily improve the "look" of MySensors Nodes in FHEMWEB. If you're interested in contributing, just give me a hint here or in the FHEM-forum (the later is more related to FHEM, so I'd prefer the FHEM forum; you may also post in english there - especially in the MySensors subforum).

Sounds really strange, but the info you provide imo is to limited to expect any helpful answer. If FHEM is crashing "reliably", you should analyse the FHEM log (and perhaps try to get an extended log) or start FHEM in a special debugging mode and try to reproduce the problem. (May not solve the underlying problem, but) why are you not just changing the DEF of your original GW to point to the new one? Additional questions you may answer: What type of GW did you use and are you now using? Controller Hard- & Software (Pi or decent Linux machine, Windows server, VM...???) Does FHEM also crash, if you try to autocreate the problematic Node not as #11, but as the first? How often died you save your config in the process of including nodes? Did you monitor memory usage? If crashing FHEM is related to a "special" node: What is different in this sketch? ...

@Fleischtorte OK this will help. I think i flash the mysensor code to an Arduino and let him talk to serial monitor, so i can see it better. Nice Nick...was für ein Name

@Hermann-Kaiser thx, will check it today and get back to you.

I just compiled the Gateway in the 1.4.2 Mysensors bundle. I compiled a LUX node and a Pressure node, but still no luck, I always get the nodes showing up as Node 254 and overwriting each other. So seems my issue may not related to the Gateway Version.

@m26872: Ithink you are right, that would have helped too, or just deleting the device and getting it autoincluded again help too thanks

Had the same Problem! I'm totaly new to MYSENSORs and my gateway runs on an Arduino pro mini 8MHz attatched to a Pi. Funny thing was that the controller is able to send data at 115.2kbaud but can't read at that speed when clocked with 8MHz ( as explained here : http://forum.mysensors.org/topic/1483/trouble-with-115200-baud-on-3-3v-8mhz-arduino-like-serial-gateway-solution-change-baudrate). Solution: Set your baudrate to 57600 end reupload the sketch. Took me quite a while bevor I figured that one out. Hope that helps anyone how encounters the same Problem.

Here's a good source of info for non German speakers: http://www.ply.me.uk/bits_and_pieces/fhem_snippets.html