interfacing NRF24L01+ and Leonardo !



  • hi . Please Help a newbie !
    i have a problem with interfacing the NRF24L01+ module with Arduino Leonardo board !
    this nrf module works well with arduino UNO . the arduino can receive and send data ! ( MISO 12 , MOSI 11, SCK 13 )
    i tried different wiring methods . i tried like the UNO using the 11 12 13 digital pins of the leonardo , and didn't work .
    i also use the ICSP headers to connect the MOSI MISO SCK and it didn't work !
    CE/CSN to 9/10 , i also tried 8/10 ! nothing happened . the leonardo doesn't receive nothing !

    here is the code for the receiver board ( leonardo)

    #include <SPI.h>
    #include <nRF24L01.h>
    #include <RF24.h>
    RF24 radio(9, 10);   // nRF24L01 (CE, CSN)
    const byte address[6] = "00001";
    
    
    struct Data_Package {
      
      byte jaxisX;
      byte jaxisY;
      byte jButton;
      byte button1;
      byte button2;
      byte button3;
      byte button4;
      byte button5;
      byte button6;
      
    };
    Data_Package data; 
    
    void setup() {
      Serial.begin(9600);
      radio.begin();
      radio.openReadingPipe(0, address);
      radio.setAutoAck(false);
      radio.setDataRate(RF24_250KBPS);
      radio.setPALevel(RF24_PA_LOW);
      radio.startListening(); //  Set the module as receiver
     
    }
    void loop() {
     
      if (radio.available()) {
        radio.read(&data, sizeof(Data_Package));  
     Serial.print("data.jaxisX ");
      Serial.println(data.jaxisX);
      Serial.print("data.jaxisY ");
      Serial.println(data.jaxisY);
      Serial.print("data.jButton ");
      Serial.println(data.jButton);
      Serial.print("data.button1 ");
      Serial.println(data.button1);
      Serial.print("data.button2 ");
      Serial.println(data.button2);
      Serial.print("data.button3 ");
      Serial.println(data.button3);
      Serial.print("data.button4 ");
      Serial.println(data.button4);
      Serial.print("data.button5 ");
      Serial.println(data.button5);
      Serial.print("data.button6 ");
      Serial.println(data.button6);
      Serial.println("*************************");
      //delay(500);// to easly read the data in serial monitor
    }
    }
    

    and i use the wiring in this pic and the same module 0_1548075858338_rf24l01aleonardo.PNG


  • Plugin Developer

    You don't seem to be using MySensors?


Log in to reply
 

Suggested Topics

  • 1
  • 1
  • 198
  • 2
  • 2
  • 10

23
Online

11.2k
Users

11.1k
Topics

112.5k
Posts