I have already published all the documentation, on my website, GitHub and openhardware.io
For now I leave the node as finished.
SmartHome: Wireless LED RGBW Controller – 00:55— giltesa
Thanks for the tip!. It looks like a USB powered Arduino Nano cannot handle the long range radios power requirements. I powered the radio module independently and I can send commands succesfully again!
The range has not improved, though, but that's another matter...
Thanks !
Hi @blackchart,
Unfortunately, all devices are sold out. Further production is possible only when ordering more than 10 devices (in this case, I also can modify the device to suit your needs).
Hello, i'm making some progress; received the components this week.
Unfortunately it doesn't work... yet
For now i have SanityCheck failure in to logs.
I'm afraid my soldering of all these little components is not good. I tested with a multimeter the 4 pins and i have continuity on one of them but maybe not the others so i guess i will have to try remelting all these small regulators ???
Hi @talhatec ,
The remote controls work well. 4 months ago I installed a new battery and from time to time I press the button to check if they continue with battery, they sleep correctly.
I remain pending to change the RF antenna for a better one and to improve some failures in the connectors of the battery that at the moment are very fragile (the pad has little copper).
The casing can be purchased online
https://www.ebay.com/itm/Bluetooth-4-0-GPS-Tracker-Locator-Smart-Alarm-Anti-lost-Device-Self-Portrait-SC/401394156488
For now the project is stopped, I want to test the Aqara sensors (I buy them this week), in any case the domotics is now my lowest priority.
@torfinn said in ATMega328p 8Mhz internal, standalone, mysensors low power problem:
#define MY_REGISTRATION_FEATURE Disabled
This has no effect, the correct approach would be to comment this line:
https://github.com/mysensors/MySensors/blob/master/MyConfig.h#L146