<![CDATA[💬 ZTX IP CONTROLLER]]>https://www.openhardware.io/view/718/ZTX-IP-CONTROLLER

]]>https://forum.mysensors.org/topic/10572/ztx-ip-controllerRSS for NodeWed, 12 Aug 2026 23:28:23 GMTFri, 02 Aug 2019 08:38:44 GMT60<![CDATA[Reply to 💬 ZTX IP CONTROLLER on Tue, 15 Sep 2020 21:50:44 GMT]]>Sorry, one more mistake. On the board, the UART port connector rotates on 180 degrees. In this case, UART on the Orange PI Zero and UART on the board should be connected with wires.

]]>https://forum.mysensors.org/post/107570https://forum.mysensors.org/post/107570Tue, 15 Sep 2020 21:50:44 GMT<![CDATA[Reply to 💬 ZTX IP CONTROLLER on Sat, 29 Aug 2020 22:24:25 GMT]]>Good solution, but have a mistake. Voltage regulator 3.3V. Wrong pinouts on the PCB.

]]>https://forum.mysensors.org/post/107405https://forum.mysensors.org/post/107405Sat, 29 Aug 2020 22:24:25 GMT<![CDATA[Reply to 💬 ZTX IP CONTROLLER on Sun, 22 Sep 2019 17:28:45 GMT]]>Thank you for sharing this very cool project.

]]>https://forum.mysensors.org/post/101397https://forum.mysensors.org/post/101397Sun, 22 Sep 2019 17:28:45 GMT