Extrenal contact from water valve on same child-id



  • Hello MySensors friends,

    I made a node to control a water valve, the valve has its own status contact which I use as status signaling in the controller (Domoticz) of the valve,
    The contact uses the same child ID as the control of the valve, in MYScontroller I see that this works well, I send the valve open, if the valve is open the status will also be set to 1, so exactly as I want it .

    Only within Domoticz does the status of the control change immediately when the button is pressed, and when the valve is open I see the status getting a trigger again, so the berict will certainly come through.

    In the Domoticz hardware settings I have already disabled ACT from this child ID.

    Does anyone know how I can adjust this so that the status does not change until the valve has actually changed position?

    Thank you in advance

    dzjr


Log in to reply
 

Suggested Topics

11
Online

11.4k
Users

11.1k
Topics

112.7k
Posts