Sniffing RS485 MODBUS data



  • Hello,

    I have installed ventilation system in my apartment with this LCD acting like separate device:
    6d9528c4-4851-4edc-9976-ca6b2f21bc49-image.png

    It have 4 wires connected. After researching I found main board uses RS485 MODBUS:
    026e8213-51dc-41ec-915d-6939dc497f72-image.png

    I know there is Arduino RS485 modules, which probably could simulate signals to main board. But main problem is I don't know what messages there are. I tried to look for some suggestions on internet, but had no luck. Could some point me how to read this LCD messages to main board so I could simulate same messages over Arduino?

    Thanks!


Log in to reply
 

Suggested Topics

  • 1
  • 5
  • 1
  • 10
  • 1
  • 2

16
Online

11.2k
Users

11.1k
Topics

112.5k
Posts