I liked domoticz (was very easy to set up and use). Together with dzVents scripting wasn't that difficult either. But I also had some problem with it lately, so I was actually thinking about switching to openhab (2).
@Jonathan-Roberts said in Simple AC/DC Switch WeMos:
@nca78 bummer. So I think 2 options...
What if the Wemos is raised off the PCB. That would be almost 5/8". In your experience would that help?
And maybe the best option, slide the antenna module straight down,. move the relay up and spin it around so the connections are on the outside edge.
I'm trying to make this multi-purpose and allowing both headers to be fully functional to other projects. thx for the advise.
1 would help but not that much. It's already not a good thing to have the transformer just next to it on the side, so you should avoid blocking one more direction with tracks.
I don't understand your necessity to have connectors available for something else on the relay that is too high to put anything on top ?
2 sounds like a much better option, make sure you have nothing right and left of the antenna when you move things around.
The problem you will have with this layout is the USB in that situation...
It doesn't sound like a great idea to me to use Wemos on this board especially for the relay part, it's just a cheap chinese relay with 3/4 components so why not just put them directly on you board to make the layout so much easier ?
I have the feeling that you're trying to make things "easier" by using Wemos and its shields, but in the end you seem to lose more than you gain. And neither does it seem "safer" to use their relay shield as it forces you to have extra wires between main of the HLK and relay shield connector.
@Dwalt oh wow.. thanks so much.. i was waiting for you to get back to me but never saw this post.. and i just happened to stumble on it when i was looking to see if you had been back on the forum or not.
I'm good with the hardware side of things and can shell script and do windows scripting. but still have not learned this coding yet.
i have all the hardware for the 433 stuff.
i even got the RF stuff to work (on my RPI2) and sniffed all my codes
i could just never get it to work with my arduino stuff.
likely the code, so i'm excited to give your code a go.
Thanks!
Hi @blackchart,
Unfortunately, all devices are sold out. Further production is possible only when ordering more than 10 devices (in this case, I also can modify the device to suit your needs).