Led Rx,Tx,Err for ESP8266 Wifi gateway not working.



  • Hi,
    I have a small problem: I am using the Gateway Mysensor EPS8266 WIFi.

    Everything is correctly working except the leds:

    in the code mysensor code , there was:

    // Flash leds on rx / tx / err
    // Led pins used if blinking feature is enabled above

    define MY_DEFAULT_ERR_LED_PIN 16 // Error led pin

    define MY_DEFAULT_RX_LED_PIN 16 // Receive led pin

    define MY_DEFAULT_TX_LED_PIN 16 // the PCB, on board LED

    I replaced by:

    // Flash leds on rx / tx / err
    // Uncomment to override default HW configurations
    #define MY_DEFAULT_ERR_LED_PIN 1 // Error led pin
    #define MY_DEFAULT_RX_LED_PIN 3 // Receive led pin
    #define MY_DEFAULT_TX_LED_PIN 4 // the PCB, on board LED

    and it does not work: the LEDs are always on.

    can you tell me if these pins are used for other things and only led 16 is available?

    Thanks for your help

    Gerard


Log in to reply
 

Suggested Topics

  • 3
  • 2
  • 24
  • 4
  • 3
  • 1

28
Online

11.2k
Users

11.1k
Topics

112.5k
Posts