Dallas Tempsensor - No temperature?



  • Hey!

    Got the Uno as temp sensor and Nano as gateway, both with 4.7K caps for the radio.

    Here is what i currently got from the MYSController debug:

    3/30/2015 9:10:47 INFO: Disconnected
    3/30/2015 9:14:13 INFO: Flushing buffer
    3/30/2015 9:14:13 INFO: Conneted to COM5
    3/30/2015 9:14:14 RECV: 0;0;3;0;14;Gateway startup complete.
    3/30/2015 9:14:43 SEND: 255;0;3;0;13;0
    3/30/2015 9:15:14 RECV: 0;0;3;0;9;read: 255-255-255 s=255,c=3,t=7,pt=0,l=0:
    3/30/2015 9:15:15 RECV: 0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=8,pt=1,l=1,st=fail:0
    3/30/2015 9:15:16 RECV: 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
    3/30/2015 9:15:16 RECV: 255;255;3;0;3;
    3/30/2015 9:15:16 CHILD: New child discovered, node id=255, child id=internal
    3/30/2015 9:15:16 SEND: 255;255;3;0;4;1
    3/30/2015 9:15:16 RECV: 0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=4,pt=0,l=1,st=fail:1
    3/30/2015 9:15:18 RECV: 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
    3/30/2015 9:15:18 RECV: 255;255;3;0;3;
    3/30/2015 9:15:18 SEND: 255;255;3;0;4;1
    3/30/2015 9:15:18 RECV: 0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=4,pt=0,l=1,st=fail:1
    3/30/2015 9:15:20 RECV: 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
    3/30/2015 9:15:20 RECV: 255;255;3;0;3;
    3/30/2015 9:15:20 SEND: 255;255;3;0;4;1
    3/30/2015 9:15:20 RECV: 0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=4,pt=0,l=1,st=fail:1
    3/30/2015 9:15:22 RECV: 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
    3/30/2015 9:15:22 RECV: 255;255;3;0;3;
    3/30/2015 9:15:22 SEND: 255;255;3;0;4;1
    3/30/2015 9:15:22 RECV: 0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=4,pt=0,l=1,st=fail:1
    3/30/2015 9:15:25 RECV: 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
    3/30/2015 9:15:25 RECV: 255;255;3;0;3;
    3/30/2015 9:15:25 SEND: 255;255;3;0;4;1
    3/30/2015 9:15:25 RECV: 0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=4,pt=0,l=1,st=fail:1
    3/30/2015 9:17:00 RECV: 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
    3/30/2015 9:17:00 RECV: 255;255;3;0;3;
    3/30/2015 9:17:00 SEND: 255;255;3;0;4;1
    3/30/2015 9:17:00 RECV: 0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=4,pt=0,l=1,st=fail:1
    

    Nothing shows up in Domoticz either.
    As you might have figured out. I'm new to the MySensors community.


  • Admin

    @Robin-Nilsson The sensor is not accepting the assigned ID (=1). Try clearing the EEPROM of both (GW and sensor) with (clearEEPROM) and give it another shot.



  • @tekka Thanks for the fast response! I have now tried resetting the EEPROM on both. Still the same issue 😞
    Actually did this twice.

    Here is my output after the reset.
    I'm getting pretty frustrated after spending two days on this issue 👎

    3/30/2015 12:22:34 NODE: New node discovered, node id=255
    3/30/2015 12:22:34 CHILD: New child discovered, node id=255, child id=internal
    3/30/2015 12:22:34 SEND: 255;255;3;0;4;1
    3/30/2015 12:22:34 RECV: 0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=4,pt=0,l=1,st=fail:1
    3/30/2015 12:22:36 RECV: 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
    3/30/2015 12:22:36 RECV: 255;255;3;0;3;
    3/30/2015 12:22:36 SEND: 255;255;3;0;4;1
    3/30/2015 12:22:36 RECV: 0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=4,pt=0,l=1,st=fail:1
    3/30/2015 12:22:37 RECV: 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
    3/30/2015 12:22:37 RECV: 255;255;3;0;3;
    3/30/2015 12:22:37 SEND: 255;255;3;0;4;1
    3/30/2015 12:22:37 RECV: 0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=4,pt=0,l=1,st=fail:1
    3/30/2015 12:22:39 RECV: 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
    3/30/2015 12:22:39 RECV: 255;255;3;0;3;
    3/30/2015 12:22:39 SEND: 255;255;3;0;4;1
    3/30/2015 12:22:39 RECV: 0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=4,pt=0,l=1,st=fail:1
    3/30/2015 12:22:41 RECV: 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
    3/30/2015 12:22:41 RECV: 255;255;3;0;3;
    3/30/2015 12:22:41 SEND: 255;255;3;0;4;1
    3/30/2015 12:22:41 RECV: 0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=4,pt=0,l=1,st=fail:1
    3/30/2015 12:23:12 RECV: 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
    3/30/2015 12:23:12 RECV: 255;255;3;0;3;
    3/30/2015 12:23:12 SEND: 255;255;3;0;4;1
    3/30/2015 12:23:12 RECV: 0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=4,pt=0,l=1,st=fail:1
    3/30/2015 12:23:49 RECV: 0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0:
    3/30/2015 12:23:49 RECV: 255;255;3;0;3;
    3/30/2015 12:23:49 SEND: 255;255;3;0;4;1
    3/30/2015 12:23:49 RECV: 0;0;3;0;9;read: 255-255-255 s=255,c=3,t=7,pt=0,l=0:
    3/30/2015 12:23:49 RECV: 0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=8,pt=1,l=1,st=fail:0
    3/30/2015 12:23:49 RECV: 0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=4,pt=0,l=1,st=fail:1
    
    

    Could this be a broken Arduino, sensor or/and radio?


  • Admin

    @Robin-Nilsson could be an issue with the eeprom, problem with the nrf chip (fake nrf24l01+? see recent discussions in the forum). Try with a static ID (=1) using:

    gw.begin(NULL,1,false);


Log in to reply
 

Suggested Topics

24
Online

11.2k
Users

11.1k
Topics

112.5k
Posts