<![CDATA[Any mass produced prototyping shields for the pro mini?]]>I looked, and I'm not finding any. Surely, it cannot be true?

]]>https://forum.mysensors.org/topic/1801/any-mass-produced-prototyping-shields-for-the-pro-miniRSS for NodeThu, 13 Aug 2026 00:26:22 GMTFri, 14 Aug 2015 15:02:33 GMT60<![CDATA[Reply to Any mass produced prototyping shields for the pro mini? on Sun, 16 Aug 2015 01:30:15 GMT]]>@NeverDie Not exactly mass produced, but here are some other options:

https://oshpark.com/shared_projects/uXIff7XO

https://oshpark.com/shared_projects/pRJiKWxV

https://oshpark.com/shared_projects/nJ8HNuZj

Cheers
Al

]]>https://forum.mysensors.org/post/19096https://forum.mysensors.org/post/19096Sun, 16 Aug 2015 01:30:15 GMT<![CDATA[Reply to Any mass produced prototyping shields for the pro mini? on Sat, 15 Aug 2015 21:04:35 GMT]]>Actually, it looks as though virtually any 2.54 pitch prototyping board would easily mate with a pro mini. There's no "oops" with the pitch as there was with the Uno to prevent it.

]]>https://forum.mysensors.org/post/19071https://forum.mysensors.org/post/19071Sat, 15 Aug 2015 21:04:35 GMT<![CDATA[Reply to Any mass produced prototyping shields for the pro mini? on Sat, 15 Aug 2015 03:33:40 GMT]]>Here's an interesting board, becauseit also considers what kind of box it might ultimately go into:
prominibox.JPG

http://www.ebay.com/itm/ARDUINO-ultimate-prototype-board-PROTO-SHIELD-/271050561349?pt=LH_DefaultDomain_2&hash=item3f1bdf5745

]]>https://forum.mysensors.org/post/19027https://forum.mysensors.org/post/19027Sat, 15 Aug 2015 03:33:40 GMT<![CDATA[Reply to Any mass produced prototyping shields for the pro mini? on Fri, 14 Aug 2015 21:12:43 GMT]]>Seems like there should be something better. I'm specifically thinking of how to cheaply yet cleanly hook up the RFM69x.

Ideally, all the pins would connect upwards into the protoboard so that it can be attached/detached cleanly just via header pins.

]]>https://forum.mysensors.org/post/19000https://forum.mysensors.org/post/19000Fri, 14 Aug 2015 21:12:43 GMT<![CDATA[Reply to Any mass produced prototyping shields for the pro mini? on Fri, 14 Aug 2015 18:00:45 GMT]]>https://www.sparkfun.com/products/9709

http://www.amazon.com/ProtoShield-for-Arduino-Pro-Mini/dp/B004G58TEE

]]>https://forum.mysensors.org/post/18962https://forum.mysensors.org/post/18962Fri, 14 Aug 2015 18:00:45 GMT