#define MY_PARENT_NODE_ID AUTO fails

FotoFieber

Playing with #define MY_RF24_ENABLE_ENCRYPTION I found a problem with

#define MY_PARENT_NODE_ID AUTO

It doesn't find a parent. (To reproduce, please clear the EEPROM first.)

With
#define MY_PARENT_NODE_ID 0
it is working.

It seems to write the parent in the EEPROM and is working after that with the AUTO-setting. If I then clear the EEPROM, it stops working again.

Is this only a problem with encryption or is this a general problem?

hek

Encryptions is relatively untested. And you did enable encryption on both gateway and node?

I can probably make some tests after work tonight.

FotoFieber

@hek said:

Encryptions is relatively untested. And you did enable encryption on both gateway and node?

Yes, I did enable that.

My setup:

Problem can be reproduced wiith both b and c. It is working with fixed PARENT_NODE_ID.

Day 1 - Status report
Announcements • • hek