Having trouble connecting sensors to Vera Edge (inclusion mode) through ESP8266 WiFi Gateway

  • I've set up esp8266 gateway and it works with my one sensor node (just 4 switches). Both are running 1.6beta dev branch.

    I just bought Vera Edge (latest firmware) and installed the plugin. The plugin shows up fine and says it's connected (I gave it esp's ip)

    The issue is that I can't get the sensor node to connect. According to the doc I have to start inclusion mode and restart the sensor.

    That is what I do and here is the log of Vera connecting, me clicking START on plugin inclusion mode and then restarting the sensor.

    0;0;3;0;9;Client 0 connected
    0;0;3;0;9;Client 0: 0;0;3;0;2;Get Version
    0;0;3;0;9;Client 0: 
    0;0;3;0;9;Client 0: 0;0;3;0;5;1
    0;0;3;0;9;Client 0: 
    0;0;3;0;9;read: 1-1-0 s=255,c=0,t=17,pt=0,l=10,sg=0:1.6.0-beta
    0;0;3;0;9;read: 1-1-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
    0;0;3;0;9;read: 1-1-0 s=3,c=0,t=0,pt=0,l=0,sg=0:
    0;0;3;0;9;read: 1-1-0 s=4,c=0,t=0,pt=0,l=0,sg=0:
    0;0;3;0;9;read: 1-1-0 s=5,c=0,t=0,pt=0,l=0,sg=0:
    0;0;3;0;9;read: 1-1-0 s=6,c=0,t=0,pt=0,l=0,sg=0:
    0;0;3;0;9;read: 1-1-0 s=3,c=1,t=16,pt=2,l=2,sg=0:0
    0;0;3;0;9;read: 1-1-0 s=5,c=1,t=16,pt=2,l=2,sg=0:0

    After this is done nothing changes on vera, there's still just mysensors device and no new devices.

    I know Vera works because it picked up all of my ecobee3 sensors just fine.

    Any idea as to what could be the problem?

    Thank you!

Log in to reply

Suggested Topics

  • 8
  • 14
  • 4
  • 9
  • 2
  • 7
  • 14
  • 30