Home Assistant v 0.11.1 with switch support

[mirko314]

@martinhjelmare
I Changed the Version, yet there is nothing added to the dashboard.
I used the sample BinarySwitch example sketch of MYS. The Sensor Arduino has a button connected to Pin 3.
I'm relativly new here so maybe I missed something. And I don't know what Values you mean.

[martinhjelmare]

@mirko314

Can you post your sketch and the complete log of HA after start? You can censor any sensitive info.

[martinhjelmare]

@mirko314

A clarification: In home assistant a switch is something you can turn on/off from home assistant, an actuator. The BinarySwitch example in mysensors examples is something you turn on/off by the node, a sensor.

It should work anyhow, but I was a bit confused at first. :smiley:

[mirko314]

The Whole log is:
screenlog.txt
The Sketch is:
BinarySwitchSensor.ino
The Sketch was not modified and should be the same as the one of the MYS download Page.

Do I maybe have to add anything to my config.yaml besides the plattform thing?

[martinhjelmare]

Unfortunately, I've realized this is a bug caused by me. There will be a bugfix release soon, so I hope we can have a fix for this in there. Sorry for the inconvenience!

Right now the binary sensors are missing in the sensor platform. I think it's due to me planning to do a binary sensor platform, but then changing my mind, and posponing that. Again sorry!
:anguished:

[mirko314]

Alright then, I started to feel a bit dumb :D
If you need any help let me know!
Thank you for looking into the issue :+1:

[martinhjelmare]

@mirko314

Thanks for testing and reporting the problem. All feedback is very welcome and important, cause even though I try to test most scenarios, it's easy to miss something. In this case, though, I feel a bit embarrassed. :flushed:

I've submitted a tested pull request which fixes this, and it has already been merged. Hopefully the bugfix release will be live very soon.

[martinhjelmare]

Update: Bugfix release 0.11.1 is now out.

[mirko314]

Nice!
Thank you, I installed it, works like a charm!
Going to try a HA switch tomorrow!
Are 1-Wire Components like AM2301 Temp-Sensor already supported?

[martinhjelmare]

I'm not sure that the library provided with mysensors supports DHT21 (AM2301). The readme for DHT library only mentions "DHT11 and DHT22, AM2302, RHT03".

But I found this post, where the adafruit library is used together with mysensors:
http://forum.mysensors.org/topic/841/solar-powered-mini-weather-station/53

As long as you get your temp/hum sensors going with the correct library there shouldn't be a problem of presenting them as mysensors sensors to home assistant.

[mirko314]

Well I will look into, thank you!

I do not know if this is the right place for further problems, if not tell me.

I tried to remote control a relay today
I used the official sketch of MYS at https://github.com/mysensors/Arduino/blob/master/libraries/MySensors/examples/RelayActuator/RelayActuator.ino

Even though it Looks like they are properly connected, there is no switch appearing on HA-Dashboard.
Log of the Sensor-Arduino Running RelayActuator.ino:

send: 1-1-0-0 s=255,c=0,t=18,pt=0,l=5,sg=0,st=ok:1.5.1
send: 1-1-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
read: 0-0-1 s=255,c=3,t=6,pt=0,l=1,sg=0:M
repeater started, id=1, parent=0, distance=1
send: 1-1-0-0 s=255,c=3,t=11,pt=0,l=5,sg=0,st=ok:Relay
send: 1-1-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.0
send: 1-1-0-0 s=1,c=0,t=3,pt=0,l=0,sg=0,st=ok:

Log of HA:

INFO:mysensors.mysensors:/dev/ttyUSB0 is open...
INFO:mysensors.mysensors:Connected to /dev/ttyUSB0
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:gateway started, id=0, parent=0, distance=0
INFO:homeassistant.components.sensor:Updating sensor entities
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=0,t=18,pt=0,l=5,sg=0:1.5.1
INFO:homeassistant.components.mysensors:update sensor_update: node 1
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:send: 0-0-1-1 s=255,c=3,t=6,pt=0,l=1,sg=0,st=ok:M
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=11,pt=0,l=5,sg=0:Relay
INFO:homeassistant.components.mysensors:update sensor_update: node 1
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.0
INFO:homeassistant.components.mysensors:update sensor_update: node 1
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=1,c=0,t=3,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 1
INFO:homeassistant.components.device_tracker.nmap_tracker:Scanning
INFO:homeassistant.components.device_tracker.nmap_tracker:No MAC address found for 192.168.2.111
INFO:homeassistant.components.device_tracker.nmap_tracker:nmap scan successful
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=0,t=18,pt=0,l=5,sg=0:1.5.1
INFO:homeassistant.components.mysensors:update sensor_update: node 1
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:send: 0-0-1-1 s=255,c=3,t=6,pt=0,l=1,sg=0,st=ok:M
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=11,pt=0,l=5,sg=0:Relay
INFO:homeassistant.components.mysensors:update sensor_update: node 1
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.0
INFO:homeassistant.components.mysensors:update sensor_update: node 1
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=1,c=0,t=3,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 1```

[mirko314]

Sorry, I forgot to ask, is it implemented yet? :D
I just scrambled through the code at HA
https://github.com/balloob/home-assistant/blob/dev/homeassistant/components/switch/mysensors.py
and I could not detect the RELAY type. But than again I do not know alot of both of the systems, just guessing.

[martinhjelmare]

@mirko314

You should send a value from the node child to set initial state also. I think that's what's missing.

Read my post here:
http://forum.mysensors.org/topic/2388/home-assistant-how-to-recognize-mysensors-nodes/27

[mirko314]

@martinhjelmare
Would you mind to elaborate a bit more?
I am not sure how to alter the script.

[martinhjelmare]

@mirko314

For example:

...
MySensor gw;
MyMessage msgArray[NUMBER_OF_RELAYS];
for (int sensor=1; sensor<=NUMBER_OF_RELAYS;sensor++) {
    msgArray[sensor-1] = msg(sensor, V_STATUS);
}

void setup() {
    ...
    gw.begin();
    for (int sensor=1; sensor<=NUMBER_OF_RELAYS;sensor++) {
        gw.present(sensor, S_BINARY);
        gw.send(msgArray[sensor-1].set(0));
    }
    ...
}

If you don't need to send any more messages after the setup funtion, ie access the message variables in the array anywhere else, you can move the assigning of the array in the first for loop to the second for loop in the setup function, to avoid code duplication.

You need to send at least one value per child to populate all data structures in home assistant.

Edit: You can actually move the assigning of the array and only have one for loop, inside the setup funtion, anyhow, since the array is initialized separately outside the functions.

[drock1985]

Hi @martinhjelmare

I have installed 0.11.1 and added the lines to configuration.yaml, but my sensors are bit showing in ha itself. The ID of the nodes is being passed to ha in the log, but nothing else. Trying to set to a pir, temp/humid, and relay switches.

[martinhjelmare]

@drock1985

Please show me the home assistant log. I can't really say anything useful without it.

[drock1985]

Hi @martinhjelmare

here is the output from /home/pi/.homeassistant/home-assistant.log:

6-01-24 15:08:16 netdisco.ssdp: Found malformed XML at http://192.168.86.142:9080: status=ok

This is my configuration.yaml

homeassistant:
  # Name of the location where Home Assistant is running
  name: Home
  # Location required to calculate the time the sun rises and sets
  latitude: 
  longitude: 
  # C for Celcius, F for Fahrenheit
  temperature_unit: C
  # Pick yours from here: http://en.wikipedia.org/wiki/List_of_tz_database_time_zones
  time_zone: America/Halifax

# Enables the frontend
frontend:

# Checks for available updates
updater:

# View all events in a logbook
logbook:
# Track the sun
sun:

# Enables support for tracking state changes over time.
history:

# Show links to resources in log and frontend
#introduction:

# Allows you to issue voice commands from the frontend
conversation:

# Discover some devices automatically
discovery:

# Webcams
camera 1:
  platform: mjpeg
  mjpeg_url: http://192.168.86.117:10012/videofeed
  name: LivingRoom Camera
  username: root
  password: groot

# Squeezebox Server
media_player 1:
  platform: squeezebox
  host: 192.168.86.113
  port: 9090

# MySensors Serial Gateway

mysensors:
  gateways:
    - port: '/dev/ttyUSB0'
      persistence_file: '/home/pi/.homeassistant/mysensors.json'
#  debug: true
  persistence: true
  version: '1.5'

Would it be because my nodes are set for manual ID and not auto?

[martinhjelmare]

@drock1985

The log file only outputs errors as default. Try starting home assistant from the command line with hass and then copy the output. It should be a lot more than one line.

You should shut down home assistant first if you have it running as a service.

Activate debug first for mysensors though.

[drock1985]

@martinhjelmare

Here is the .log file

16-01-24 15:25:28 mysensors.mysensors: Error decoding message from gateway, probably received bad byte.

And from the SSH console after running hass as instructed

INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.master_bedroom=off; supported_media_commands=1021, friendly_name=Master Bedroom @ 15:25:41 24-01-2016>, entity_id=media_player.master_bedroom>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.man_cave=off; supported_media_commands=1021, friendly_name=Man Cave @ 15:25:41 24-01-2016>, entity_id=media_player.man_cave>
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163
INFO:pywemo.subscribe:Subscribing to events from <WeMo Switch "CatFan">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:pywemo.subscribe:Subscribing to events from <WeMo Switch "LivingRoomLamp">
INFO:pywemo.subscribe:Resubscribe for <WeMo Switch "CatFan">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.living_room=off; supported_media_commands=1021, friendly_name=Living Room @ 15:25:41 24-01-2016>, entity_id=media_player.living_room>
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state switch.catfan=off; friendly_name=CatFan @ 15:25:41 24-01-2016>, entity_id=switch.catfan>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=unknown; auto=True, entity_id=[], friendly_name=all switches @ 15:25:41 24-01-2016>, entity_id=group.all_switches>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=off; auto=True, entity_id=('switch.catfan',), friendly_name=all switches @ 15:25:41 24-01-2016>, entity_id=group.all_switches>
INFO:pywemo.subscribe:Resubscribe for <WeMo Switch "LivingRoomLamp">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:pywemo.subscribe:Received event from <WeMo Switch "CatFan">(192.168.86.108)
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163
INFO:homeassistant.components.switch.wemo:Subscription update for  <WeMo Switch "CatFan">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state switch.livingroomlamp=off; friendly_name=LivingRoomLamp @ 15:25:42 24-01-2016>, entity_id=switch.livingroomlamp>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=off; auto=True, entity_id=('switch.catfan', 'switch.livingroomlamp'), friendly_name=all switches @ 15:25:42 24-01-2016>, entity_id=group.all_switches>
INFO:pywemo.subscribe:Received event from <WeMo Switch "LivingRoomLamp">(192.168.86.163)
INFO:homeassistant.components.switch.wemo:Subscription update for  <WeMo Switch "LivingRoomLamp">
INFO:pywemo.subscribe:Subscribing to events from <WeMo Insight "Christmas Tree Lights">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:pywemo.subscribe:Resubscribe for <WeMo Insight "Christmas Tree Lights">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state switch.christmas_tree_lights=off; friendly_name=Christmas Tree Lights @ 15:25:42 24-01-2016>, entity_id=switch.christmas_tree_lights>
INFO:pywemo.subscribe:Received event from <WeMo Insight "Christmas Tree Lights">(192.168.86.111)
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=off; auto=True, entity_id=('switch.christmas_tree_lights', 'switch.catfan', 'switch.livingroomlamp'), friendly_name=all switches @ 15:25:42 24-01-2016>, entity_id=group.all_switches>
INFO:homeassistant.components.switch.wemo:Subscription update for  <WeMo Insight "Christmas Tree Lights">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:pywemo.subscribe:Received event from <WeMo Insight "Christmas Tree Lights">(192.168.86.111)
INFO:homeassistant.components.switch.wemo:Subscription update for  <WeMo Insight "Christmas Tree Lights">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:homeassistant.components.http:"GET /states HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/frontend-1003c31441ec44b3db84b49980f736a7.html HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/favicon-192x192.png HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/favicon.ico HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 -
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.http:"GET /api/error_log HTTP/1.1" 200 -
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.light:Updating light entities
INFO:homeassistant.components.camera:Updating camera entities
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663560.5128732, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663530.5116684, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, entity_id=camera.livingroom_camera>
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=0,t=17,pt=0,l=5,sg=0:1.5.1
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:send: 0-0-3-3 s=255,c=3,t=6,pt=0,l=1,sg=0,st=ok:M
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=3,t=11,pt=0,l=25,sg=0:2 Door bell/chime
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.0
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=1,c=0,t=3,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=0,c=0,t=1,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=3,c=0,t=3,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=2,c=0,t=1,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:homeassistant.components.http:"GET /states HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/frontend-1003c31441ec44b3db84b49980f736a7.html HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/favicon-192x192.png HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/favicon.ico HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 -
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:homeassistant.components.api:Found broken event stream to 192.168.86.162, cleaning up
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.light:Updating light entities
INFO:homeassistant.components.camera:Updating camera entities
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663590.5271018, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663560.5128732, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, entity_id=camera.livingroom_camera>
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=above_horizon; next_rising=11:43:05 25-01-2016, elevation=14.76, next_setting=21:15:13 24-01-2016, friendly_name=Sun @ 15:25:24 24-01-2016>, old_state=<state sun.sun=above_horizon; next_rising=11:43:05 25-01-2016, elevation=14.88, next_setting=21:15:13 24-01-2016, friendly_name=Sun @ 15:25:24 24-01-2016>, entity_id=sun.sun>
INFO:homeassistant.components.api:Found broken event stream to 192.168.86.162, cleaning up
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=0,c=1,t=1,pt=7,l=5,sg=0:46.5
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=0,c=1,t=1,pt=7,l=5,sg=0:46.6
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.light:Updating light entities
INFO:homeassistant.components.camera:Updating camera entities
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663620.51471, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663590.5271018, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, entity_id=camera.livingroom_camera>
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.light:Updating light entities
INFO:homeassistant.components.camera:Updating camera entities
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663650.5204854, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663620.51471, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, entity_id=camera.livingroom_camera>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=above_horizon; next_rising=11:43:05 25-01-2016, elevation=14.63, next_setting=21:15:13 24-01-2016, friendly_name=Sun @ 15:25:24 24-01-2016>, old_state=<state sun.sun=above_horizon; next_rising=11:43:05 25-01-2016, elevation=14.76, next_setting=21:15:13 24-01-2016, friendly_name=Sun @ 15:25:24 24-01-2016>, entity_id=sun.sun>
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=0,c=1,t=1,pt=7,l=5,sg=0:46.5
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1