error No forward link or gateway feature activated. This means nowhere to send messages! Pretty pointless.



  • I'm running the development branch and am getting the following when uploading a sketch:

    Arduino: 1.6.4 (Mac OS X), Board: "Arduino Nano, ATmega328"
    
    In file included from motion.ino:30:0:
    /Users/..../Documents/Arduino3dev/libraries/MySensors/MySensor.h:285:4: error: #error No forward link or gateway feature activated. This means nowhere to send messages! Pretty pointless.
       #error No forward link or gateway feature activated. This means nowhere to send messages! Pretty pointless.
        ^
    motion:38: error: 'MySensor' does not name a type
    motion.ino: In function 'void setup()':
    motion:44: error: 'gw' was not declared in this scope
    motion.ino: In function 'void loop()':
    motion:61: error: 'gw' was not declared in this scope
    'MySensor' does not name a type
    

    Where can I find some documentation on configuring sensors running the v2 beta release?

    Thanks


  • Hero Member

    You're missing:

    // Enable and select radio type attached
    #define MY_RADIO_NRF24
    //#define MY_RADIO_RFM69
    

    (or serial gw, or rs485 or what ever)

    BEFORE

    #include <MySensor.h>
    

  • Hardware Contributor

    Post your sketch but by the looks on your errors can it be that you use code for 1.5 and 2.0 as library? In 1.5 you define gw.begin for example (motion:44: error: 'gw' was not declared in this scope) but thats removed in 2.0. You cant use the example sketches in the homepage for dev branch.



  • Ah yes... Thanks, folks!

    I got my sketches mixed up and was using a 1.5 version.


Log in to reply
 

Suggested Topics

0
Online

11.2k
Users

11.1k
Topics

112.5k
Posts