@donnib - I didn't continue this way but instead started using node-js based controller code that connects to a standard Ethernet gateway. @hek merged the code about two weeks ago. I will provide a tutorial on how to set it up from scratch shortly...
@ltigges
Hi, I can confirm your issue. Thank you for reporting!
Best will be to open a new issue in in the GitHub repo at MySensors/issues.
It would be great if you could do that- thank you.
BR Immo
@mfalkvidd No, the issue with sleep(0) still exists in V2.3.2. That is the version that the ArDuino Library installer installs currently . -- Work around is to call hwPowerDown(WDTO_SLEEP_FOEREVER) as in above code if you want the battery to last more than a day.
GS
@berkseo said in NRF51-52 PA not support ???:
The network is simple, this node is nrf52 with an amplifier and a gateway with the nrf24 radio module with an amplifier. It would be strange if a gateway with an amplifier could not deliver ACK. Two moments, or I did a very bad control of the amplifier on the node nRF52 or in the radio driver itself, something is not working well, and may need some delay settings. If i send messages with an ECHO (soft ack) request, this works fine over very long distances. Hw ack does not work properly.
Someone was able to do this for mysensors? Gateways and repeaters on nrf5 with amplifier is a very, very cool topic.