Damm I am trying to get this working with a Arduino pro mini ,,but no luck wanted to use it in the car ..
How do you wire the NRF24L01+ ???
N-Channel Mosfet s ??? model number please any help much appreciated
I have tried mosfets >>>irf510n
@WiktorDIY The ch340 are notorious for being broken. The best I ever achieved was 19200 and flakey..
I purchased a real Nano not a ch knock off eg uses a different uart no problems
Hello,
I'm thinking about upgrading this board to include pinout for LIS3DH breakout board, like this one :
https://www.aliexpress.com/item/LIS3DH-Three-Converters-Motion-Accelerometer-Triaxial-Acceleration-Temperature-Sensor-Module-Development-Board-Replace-ADXL345/32840326778.html
and ditch the ADXL shield as it's not a good solution, it has either the ADXL345 which uses too much power, or the ADXL362 which is ultra low power but lacks advanced functionality like tap/double tap detection.
I would like to have feedback of users on this (do it sound useful ?), and also know if anyone uses the SMD footprints on the board, for leds and for reserve capacitors, as it could be a cleaner board without those footprints.
I would make the following changes :
put footprint for LIS3DH accelerometer along the "NModule connector" as it has too many pins to put elsewhere
keep only one I2C footprint on the side, for "GY-49" MAX44009 light sensor breakout board: https://www.aliexpress.com/item/GY-49-MAX44009-Ambient-Light-Sensor-Module-for-Arduino-with-4P-Pin-Header-Module/32828654450.html
temperature/humidity would be via the existing "SMD" footprint, it's not through hole but very easy to solder as it's 2.54mm pad spacing
remove SMD footprints for LED, add footprint for through hole reserve capacitor, keep SMD footprints for reserve capacitors only if I have space for them
shield would be a bit extended to go over the 2 M2 holes in the "power" part of the NModule, so it could be fitted with spacers and nylon screws and have stable/reliable mechanical connection between NModule and Shield. Basically this would be the footprint of the shield :
So in the end it would make one shield to have Temperature/Humidity/Light/Acceleration or Temperature/Humidity/Light/Door.
@magpern said in MyQTherm - replace IQTherm heating thermostat:
I actually am thinking somewhat in the line of discontinuing mysensors network. It is to much, hacks and tricks, and I forget everything in between sessions.
I gave up more than once, also over period of years. Recently I came back again and decided to focus on the heart of the issue, getting my radios working and once you get over that, it starts to get fun again.
I can respect if you already moved on to something else. I even cheated on MySensors and installed some 433 mhz devices too , just to get something working. You have to keep your interest in HA alive in the meantime. But the reward is great when you get MySensors working.
There are "easier" solutions like Tasmota, 433mhz, etc. but not as customizable as MySensors. MySensors is for when you outgrow those other solutions and need something more custom.
I've added all the files manually so things should be there now (though I'd recommend grabbing things from github to preserve directory structure and get all the files).
@gohan I live in Switzerland, but perhaps my place has more humidity than normal.
It's not silly problems we're working on, we're learning all the time!