<![CDATA[MYSBootloader - different pin for CE (nrf24)]]>Hi all,
I'm planning to use MYSBootloader with a network of nrf24 modules. I have just ordered an USBasp, but I have a doubt..

I was changing my sketches to free a PWM pin and I choose to assign MY_RF24_CE_PIN to pin 14 (instead of pin 9).
I think that this could cause some problem with MYSBootloader configuration.
Isn't it?

What are the requirements to install MYSBootloader?

Thanks
Max

]]>https://forum.mysensors.org/topic/6446/mysbootloader-different-pin-for-ce-nrf24RSS for NodeWed, 07 Oct 2026 15:25:48 GMTMon, 13 Mar 2017 15:49:14 GMT60<![CDATA[Reply to MYSBootloader - different pin for CE (nrf24) on Wed, 22 Mar 2017 13:33:12 GMT]]>Hi,
I haven't found any specific documentation but looking in the MYSBootloader's code I found this two checks in HW.h (https://github.com/mysensors/MySensorsBootloaderRF24/blob/development/HW.h)

#if defined(SPI_PINS_CE9_CSN10)
..
#elif defined(SPI_PINS_CSN7_CE8)
..
#endif

does it mean that those PINs (9+10 or 7+8) are the only options to have MYSBootloader on Arduino boards? (obviously without modifying the code and recompiling..)

thanks
Max

]]>https://forum.mysensors.org/post/63065https://forum.mysensors.org/post/63065Wed, 22 Mar 2017 13:33:12 GMT