@GLAB No worries, was in a similar situation.. My perspective was on what the Node could be made to provide, not what could be done within Domoticz to address the requirement - eg Had heard of Dummy counters but had no experience nor understood their purpose, nor had ever used scripts.
I had been sending a logical ON/OFF as well as a cumulative total from the Node and hit the same hair-pulling scenario as yourself.
Now only the ON/OFF is sent and the short script makes the transposition within Domoticz to a dummy meter (I think kWhr) using the internal clock in Domoticz.
Have fun
@gohan said in Arduino Pro Mini Shield for RFM69(H)W:
If I remeber right that pin is used as input so the RFM69 is not receiving any 5v signal. In addition there are people claming they have the RFM69 module working on 5v on data pins and 3.3v on vcc, but I hardly suggest to do it.
thank you just what i thought .
about direct 5v on data...well... i seen a big red sign saying n :DONT do it! lol
Level converters are so cheap...that i ordered 5 or 10 thoguether with rfm69 board.
sorry about hijack this topic, i though i was on general discussion
@legeantvert said:
On the same way, i dont understand how and where are stored the values inside the gateway if not used on each reception, are they stored somewhere to be able to answer them when serial request arrive?
You could bypass this on some kind of events obviously !
Actually my perl gateway is acting as the server Vera is for the arduino gateway. So from there I can trigger external URL, store data in a sqlite3 database... and so on !
@suhaila96 Hello I have not seen your question since I reviewed this topics, today.
What do you mean about "setup your circuit"? How did you connected you watermark sensor and to what?
@Nca78 said in Dimmable LED kitchen light (Arduino, APDS-9960, RGBWW led):
Do you use a relay to control the leds or still a MOSFET ?
i'm using mosfets.