Since I cannot find it in the ducumentation: What is the preferred pin to connect an ATSHA204 chip to a Wemos D1 mini? I see that I can set manually, but since I am doing a design from scratch anyway, why not do it properly. I guess D3 would suggest itself, since it has the pull-up already built in, while it is not connected to the LED.

]]>https://forum.mysensors.org/topic/6751/preferred-pin-for-atsha204-on-wemos-d1-miniRSS for NodeWed, 16 Sep 2026 10:14:39 GMTMon, 01 May 2017 09:06:28 GMT60