RPI Gateway with RFM95 does not receive any nodes
have built many gateways with an RPI2 and the RFM96. All work well. Now I wanted to test an RFM95 gateway.
The software compiles and starts properly.
My 3 RFM95 Nodes get but no connection.
Has anyone ever run an RPI gateway with RFM95?
Info: I have compiled the Gateway with:
.myconfigure --my-gateway = mqtt --my-controller-ip-address = 192.168.0.23 --my-mqtt-publish-topic-prefix = mysensors2-out --my-mqtt-subscribe-topic-prefix = I have the same problem with mymy-leds -my-leds-err-pin = 12 - my-leds-rx-pin = 16 --my-leds-tx -pin = 18
Gateway starts successfully but does not receive anything.
The hardware is fine. The gateway and the node run with the LowCost gateway:
Adding link to the github issue, in case the information there helps anyone: https://github.com/mysensors/MySensors/issues/863