Mqtt + sensors



  • I have now trying the setup where I have on raspberry 3 mosquitto as MQTT running and mysensors gateway also setup there. As controller I'm using home assistant.
    I can see that mqtt receives data from gateway.
    But how do I send data from my sensors (atmega328p) over nrf24l01+ to gateway?
    What do I need to add in the skatch?

    gateway:

    mysgw: Starting gateway...
    mysgw: Protocol version - 2.2.0-beta
    mysgw: MCO:BGN:INIT GW,CP=RNNG----,VER=2.2.0-beta
    mysgw: TSF:LRT:OK
    mysgw: TSM:INIT
    mysgw: TSF:WUR:MS=0
    mysgw: TSM:INIT:TSP OK
    mysgw: TSM:INIT:GW MODE
    mysgw: TSM:READY:ID=0,PAR=0,DIS=0
    mysgw: MCO:REG:NOT NEEDED
    mysgw: MCO:BGN:STP
    mysgw: MCO:BGN:INIT OK,TSP=1
    mysgw: Attempting MQTT connection...
    mysgw: connected to 127.0.0.1
    mysgw: MQTT connected
    mysgw: Sending message on topic: mysensors-out/0/255/0/0/18
    

    skatch:

    /**
     * The MySensors Arduino library handles the wireless radio link and protocol
     * between your home built sensors/actuators and HA controller of choice.
     * The sensors forms a self healing radio network with optional repeaters. Each
     * repeater and gateway builds a routing tables in EEPROM which keeps track of the
     * network topology allowing messages to be routed to nodes.
     *
     * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
     * Copyright (C) 2013-2015 Sensnology AB
     * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
     *
     * Documentation: http://www.mysensors.org
     * Support Forum: http://forum.mysensors.org
     *
     * This program is free software; you can redistribute it and/or
     * modify it under the terms of the GNU General Public License
     * version 2 as published by the Free Software Foundation.
     *
     *******************************
     *
     * REVISION HISTORY
     * Version 1.0 - Henrik EKblad
     *
     * DESCRIPTION
     * Example sketch showing how to measue light level using a LM393 photo-resistor
     * http://www.mysensors.org/build/light
     */
    
    // Enable debug prints to serial monitor
    #define MY_DEBUG
    #define MY_NODE_ID 66
    
    // Enable and select radio type attached
    #define MY_RADIO_NRF24
    //#define MY_RADIO_RFM69
    
    #define MY_MQTT_TOPIC_PREFIX "mygateway"
    
    #include <MySensors.h>
    
    #define CHILD_ID_LIGHT 15
    #define LIGHT_SENSOR_ANALOG_PIN 0
    
    unsigned long SLEEP_TIME = 30000; // Sleep time between reads (in milliseconds)
    
    MyMessage msg(CHILD_ID_LIGHT, V_LIGHT_LEVEL);
    int lastLightLevel;
    
    
    void presentation()
    {
        // Send the sketch version information to the gateway and Controller
        sendSketchInfo("Light Sensor", "1.0");
    
        // Register all sensors to gateway (they will be created as child devices)
        present(CHILD_ID_LIGHT, S_LIGHT_LEVEL);
    }
    
    void loop()
    {
        int16_t lightLevel = (1023-analogRead(LIGHT_SENSOR_ANALOG_PIN))/10.23;
        Serial.println(lightLevel);
        if (lightLevel != lastLightLevel) {
            send(msg.set(lightLevel));
            lastLightLevel = lightLevel;
        }
        sleep(SLEEP_TIME);
    }
    

  • Mod

    @alop what happens when you run the node?



  • @mfalkvidd no communication

    653955 TSF:SID:OK,ID=66
    653958 TSM:FPAR
    653977 TSF:MSG:SEND,66-66-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
    655984 !TSM:FPAR:NO REPLY
    655986 TSM:FPAR
    656006 TSF:MSG:SEND,66-66-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
    658014 !TSM:FPAR:NO REPLY
    658016 TSM:FPAR
    658035 TSF:MSG:SEND,66-66-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
    

    This here is another try to solve issues as in this post LINK


Log in to reply
 

Suggested Topics

  • 4
  • 274
  • 14
  • 9
  • 2
  • 933

0
Online

11.2k
Users

11.1k
Topics

112.5k
Posts