Hi @GertSanders,
Do you happen to still have the Eagle project files from version 3 you created and shared on OSH Park? I'd like to add a set of pads for the mini smd version of the NRF24L01. If not, I'll just use the version 2 files from openhardware.io and try my best to recreate the changes you made between them.
Kind regards,
AH
This list seems the most complete list of available Home Automation Software and not only open-source and not only for MySensors.
I have some proposals:
is it possible to add voting here to see, who has selected what software and see what is the most popular HA platform?
OpenRemote seems to be more commercial, than open source. In free version it's so limited, that almost unusable.
You can add some more Commercial Software in the list, but not sure how they can support mysensors:
--Eve Server http://www.ilevia.com/eve-server/
-- Iridium Server http://www.iridiummobile.net/server/
Regards
Hi John,
appLog.txt
I also tried using datatype string but it doesen't work. Meanwhile I have studies the log files more detailed and found the following behavior:
when defining the device skeletal and when updating the derived device (first approx. 25 lines in the log file V_STATUS is declared as string with values 51 resp. 52 as specified in the web interface. The entity is "Modul 433 MHz".
Later on, when using the toggle switch in the web interface the value has changed in the decription in the log file (see line 164 or 185) value has been changed to on/off. With this definition it seem that the mysensors-Plugin is feeded has been changed from the specified values.
My conclusion is that the change is taking place somewhere outside the mysensors-plugin.
By the way, if I change the type to string do I have to use quotation marks in the web interface?
Thanks a lot for your support.
Martin
Hello Guys ,
I am looking to run the rasp pi as gateway+controller with the nrf24 . Please where should i start from does it have any explanation like we have for the arduino s running mysensor ? .
Thank you @mfalkvidd!
I have been busy and had many issues to figure out for myself, but I still can't understand how binding with openHAB works.
How does the information from nRF24 get to openHAB? I have MySensors Binding add-on installed in openHAB.
I would be very grateful if someone could help with this last step. After this my first little sensor will be ready to go live.