Unable to get MySensors sensors to Work with MyController running on RPi

johnbritt4229

Hello,

I am running MyController on a Raspberry Pi and I have built a simple MySensors temperature and humidity sensor using the DHT-11 and an Arduino Pro Mini.

I have the serial gateway setup and I believe it is working, as it does "communicate" with my node but strange things are happening and the Sensor data is not updating.

For example, when I add the MySensors Temperature sensor node by pressing "Reset", it automatically registers 2 Nodes in MyController, one with ID 0 and another with ID 1.

The node with ID 0 "connects" itself to the gateway, as you can see here in the topology:
topology

The node with ID 1, the TemperatureandHumidity node with the actual sensors registered to it, does not "connect" to the gateway.

Here is my gateway:

Here is what the node page looks like: node page

And the sensor page: sensors

Here's my serial output from the sensor:

0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.1
3 TSM:INIT
4 TSF:WUR:MS=0
11 TSM:INIT:TSP OK
13 TSF:SID:OK,ID=1
14 TSM:FPAR
51 TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
940 TSF:MSG:READ,0-0-1,s=255,c=3,t=8,pt=1,l=1,sg=0:0
945 TSF:MSG:FPAR OK,ID=0,D=1
2058 TSM:FPAR:OK
2059 TSM:ID
2060 TSM:ID:OK
2062 TSM:UPL
2065 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1
2074 TSF:MSG:READ,0-0-1,s=255,c=3,t=25,pt=1,l=1,sg=0:1
2079 TSF:MSG:PONG RECV,HP=1
2081 TSM:UPL:OK
2083 TSM:READY:ID=1,PAR=0,DIS=1
2088 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=OK:0100
2095 TSF:MSG:READ,0-0-1,s=255,c=3,t=15,pt=6,l=2,sg=0:0100
2102 TSF:MSG:SEND,1-1-0-0,s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=OK:2.1.1
2110 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=OK:0
2122 TSF:MSG:READ,0-0-1,s=255,c=3,t=6,pt=0,l=1,sg=0:M
2130 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=11,pt=0,l=22,sg=0,ft=0,st=OK:TemperatureAndHumidity
2141 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=12,pt=0,l=3,sg=0,ft=0,st=OK:1.1
2148 TSF:MSG:SEND,1-1-0-0,s=0,c=0,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
2156 TSF:MSG:SEND,1-1-0-0,s=1,c=0,t=6,pt=0,l=0,sg=0,ft=0,st=OK:
2161 MCO:REG:REQ
2165 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=OK:2
2171 TSF:MSG:READ,0-0-1,s=255,c=3,t=27,pt=1,l=1,sg=0:1
2177 MCO:PIM:NODE REG=1
2179 MCO:BGN:STP
2182 MCO:SLP:MS=1000,SMS=0,I1=255,M1=255,I2=255,M2=255
2187 MCO:SLP:TPD
2188 MCO:SLP:WUP=-1
2190 MCO:BGN:INIT OK,TSP=1
2216 TSF:MSG:SEND,1-1-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:21.0
T: 21.00
2225 TSF:MSG:SEND,1-1-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:47.0
H: 47.00
2232 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2237 MCO:SLP:TPD
2239 MCO:SLP:WUP=-1
2263 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2268 MCO:SLP:TPD
2269 MCO:SLP:WUP=-1
2293 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2298 MCO:SLP:TPD
2299 MCO:SLP:WUP=-1
2323 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2328 MCO:SLP:TPD
2330 MCO:SLP:WUP=-1
2354 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2359 MCO:SLP:TPD
2361 MCO:SLP:WUP=-1
2384 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2390 MCO:SLP:TPD
2392 MCO:SLP:WUP=-1
2415 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2420 MCO:SLP:TPD
2422 MCO:SLP:WUP=-1
2446 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2451 MCO:SLP:TPD
2452 MCO:SLP:WUP=-1
2477 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2482 MCO:SLP:TPD
2483 MCO:SLP:WUP=-1
2506 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2511 MCO:SLP:TPD
2513 MCO:SLP:WUP=-1
2537 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2542 MCO:SLP:TPD
2544 MCO:SLP:WUP=-1
2570 TSF:MSG:SEND,1-1-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:21.0
T: 21.00
2579 TSF:MSG:SEND,1-1-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:47.0
H: 47.00
2585 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2590 MCO:SLP:TPD
2592 MCO:SLP:WUP=-1
2618 TSF:MSG:SEND,1-1-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:48.0
H: 48.00
2625 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2630 MCO:SLP:TPD
2632 MCO:SLP:WUP=-1
2656 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2661 MCO:SLP:TPD
2662 MCO:SLP:WUP=-1
2685 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2691 MCO:SLP:TPD
2693 MCO:SLP:WUP=-1
2716 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2721 MCO:SLP:TPD
2723 MCO:SLP:WUP=-1
2749 TSF:MSG:SEND,1-1-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:47.0
H: 47.00
2756 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2761 MCO:SLP:TPD
2763 MCO:SLP:WUP=-1
2787 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2792 MCO:SLP:TPD
2793 MCO:SLP:WUP=-1
2818 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2823 MCO:SLP:TPD
2824 MCO:SLP:WUP=-1
2847 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2852 MCO:SLP:TPD
2854 MCO:SLP:WUP=-1
2878 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2883 MCO:SLP:TPD
2885 MCO:SLP:WUP=-1
2909 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2914 MCO:SLP:TPD
2916 MCO:SLP:WUP=-1
2941 TSF:MSG:SEND,1-1-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:21.0
T: 21.00
2951 TSF:MSG:SEND,1-1-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:46.0
H: 46.00
2957 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2962 MCO:SLP:TPD
2964 MCO:SLP:WUP=-1
2988 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
2993 MCO:SLP:TPD
2995 MCO:SLP:WUP=-1
3018 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
3023 MCO:SLP:TPD
3024 MCO:SLP:WUP=-1
3049 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
3054 MCO:SLP:TPD
3055 MCO:SLP:WUP=-1
3080 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
3085 MCO:SLP:TPD
3086 MCO:SLP:WUP=-1
3109 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
3115 MCO:SLP:TPD
3117 MCO:SLP:WUP=-1
3140 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
3145 MCO:SLP:TPD
3147 MCO:SLP:WUP=-1
3171 MCO:SLP:MS=25000,SMS=0,I1=255,M1=255,I2=255,M2=255
3176 MCO:SLP:TPD

The resource logs in MyController are empty, but I may have the log level set incorrectly.

Any guidance or help anyone can provide me is greatly appreciated.

gohan

I think there are some elements missing.

Unable to get MySensors sensors to Work with MyController running on RPi

27

11.7k

11.2k

113.1k