I have published all the documentation in a Github repository. If someone wants to make PCBs, I recommend that you wait a little longer until you receive my PCBs and try them.
I think you need to post a clear drawing or photos of the setup and the code you are using.
I donlt know what you mean by "connecting the current in series" nor what "AC regulator" you are using or what "thermal serial currenr" is.
@GLAB No worries, was in a similar situation.. My perspective was on what the Node could be made to provide, not what could be done within Domoticz to address the requirement - eg Had heard of Dummy counters but had no experience nor understood their purpose, nor had ever used scripts.
I had been sending a logical ON/OFF as well as a cumulative total from the Node and hit the same hair-pulling scenario as yourself.
Now only the ON/OFF is sent and the short script makes the transposition within Domoticz to a dummy meter (I think kWhr) using the internal clock in Domoticz.
Have fun
I like those relays. Is that 3 different switched outputs? One thing I always liked about european wall switches is that they give you more room for components. I would like to use a similar type of relay for my in-wall switches, but with the way US single gang wall boxes are, there is a pretty narrow space constraint. I might be able to fit it if I did away with the thermal fuse, but I don't want to give up tat bit of added safety just for that.