I have published all the documentation in a Github repository. If someone wants to make PCBs, I recommend that you wait a little longer until you receive my PCBs and try them.
@zmatokan said in NModule:
@Nca78 Are you still working on this pcbs? i think it would be great to add a version that supports HiLink 220ac->5dc module on powerboard.
No I'm not working on NModules anymore, I have a few old nodes using atmega/nrf24 but I switched to NRF5 for "basic" nodes now, and to ESP32 for more "advanced" stuff.
NModule was designed for beginner and simple/riskless use, so I don't think adding high voltage option is a great idea, it's better to use an external power supply and connect the output to the powerboard.
@GLAB No worries, was in a similar situation.. My perspective was on what the Node could be made to provide, not what could be done within Domoticz to address the requirement - eg Had heard of Dummy counters but had no experience nor understood their purpose, nor had ever used scripts.
I had been sending a logical ON/OFF as well as a cumulative total from the Node and hit the same hair-pulling scenario as yourself.
Now only the ON/OFF is sent and the short script makes the transposition within Domoticz to a dummy meter (I think kWhr) using the internal clock in Domoticz.
Have fun
@acb
Hi @acb and others, regarding "Do you know if there is a version of this board that is pad-compatible with the C-versions of these HopeRF RFM69s before I go searching? (Since I believe the C-versions are also pad-compatible with the RFM95sā¦)" - did you find any alternative?
I'm in the same boat looking for an adapter from NRF24 to the footprint of RFM69*C = RFM95/96.
Thanks, Joost
I successfully worked around the issue by updating the /Library/Application Support/Perceptive Automation/Indigo 2022.1/Plugins/MySensors.indigoPlugin/Contents/Server Plugin
/plugin.py script to recognize the internal 21 code.
Here's the diff:
34c134,135
< "GATEWAY_READY" : [14, "Gateway ready", ""]
"GATEWAY_READY" : [14, "Gateway ready", ""],
"DISCOVER_RESPONSE" : [21, "Discover response", ""]
715a717,719
elif itemType == self.getInternalNumber("DISCOVER_RESPONSE"):
# 21 Ignore
pass
P.S. Indigo 2022.1 is complaining about this plugin that it won't be supported in future releases. Is there anyone out there planning to update this plugin?
Hey guys,
I was justing wondering, is there a way to deactivate the motion sensor if not being used? Eg: My motion sensors are connected to Homeseer and they show up as sensors but I was wondering if I could have an ON / OFF control to deactivate or active the motion as needed.
@YuryPol as far as I know, all licenses require some form of documentation. In all cases I know of, this is documented with the license or on the licenses official site.