esp8266 gateway doesn't connect to mqtt broker



  • Hi, I'm using ESP8266 mqtt client gateway to connect to my controller and I use cloud mqtt service. controller has connected to the broker but esp8266 doesn't connect. even it doesn't connect to the wifi and it was a access point and I've followed a topic to add a code for turn off access point. this is my code for gateway:

    #define MY_DEBUG
    
    // Use a bit lower baudrate for serial prints on ESP8266 than default in MyConfig.h
    #define MY_BAUD_RATE 9600
    
    // Enables and select radio type (if attached)
    #define MY_RADIO_NRF24
    
    
    #define MY_GATEWAY_MQTT_CLIENT
    #define MY_GATEWAY_ESP8266
    
    // Set this node's subscribe and publish topic prefix
    #define MY_MQTT_PUBLISH_TOPIC_PREFIX "mygateway1-out"
    #define MY_MQTT_SUBSCRIBE_TOPIC_PREFIX "mygateway1-in"
    
    // Set MQTT client id
    #define MY_MQTT_CLIENT_ID "mysensors-1"
    
    // Enable these if your MQTT broker requires username/password
    #define MY_MQTT_USER "***********"
    #define MY_MQTT_PASSWORD "**************"
    
    // Set WIFI SSID and password
    #define MY_ESP8266_SSID "*****************"
    #define MY_ESP8266_PASSWORD "******************"
    
    // Set the hostname for the WiFi Client. This is the hostname
    // it will pass to the DHCP server if not static.
    // #define MY_ESP8266_HOSTNAME "mqtt-sensor-gateway"
    
    // Enable MY_IP_ADDRESS here if you want a static ip address (no DHCP)
    #define MY_IP_ADDRESS 192,168,178,87
    
    // If using static ip you can define Gateway and Subnet address as well
    #define MY_IP_GATEWAY_ADDRESS 192,168,1,1
    #define MY_IP_SUBNET_ADDRESS 255,255,255,0
    
    
    //MQTT broker if using URL instead of ip address.
    #define MY_CONTROLLER_URL_ADDRESS "m21.cloudmqtt.com"
    
    // The MQTT broker port to to open
    #define MY_PORT 11262
    
    #include <ESP8266WiFi.h>
    #include <MySensors.h>
    
    void setup()
    {
        // Setup locally attached sensors
    }
    
    void presentation()
    {
        // Present locally attached sensors here
    }
    
    void loop()
    {
        // Send locally attached sensors data here
    }```
    
    

    and I get this in serial:

    scandone
    state: 0 -> 2 (b0)
    state: 2 -> 3 (0)
    state: 3 -> 5 (10)
    add 0
    aid 4
    cnt 
    271 TSM:FAIL:DIS
    289 TSF:TDI:TSL
    
    connected with Shatel, channel 1
    dhcp client start...
    ip:192.168.1.6,mask:255.255.255.0,gw:192.168.1.1
    pm open,type:2 0
    10306 TSM:FAIL:RE-INIT
    10330 TSM:INIT
    10351 !TSM:INIT:TSP FAIL
    10377 TSM:FAIL:CNT=2
    10399 TSM:FAIL:DIS
    10419 TSF:TDI:TSL
    

    anyone knows how to fix it?


  • Mod

    @tsunami see if removing

    #define MY_PORT 11262
    helps. I think this define is only meant to be used when not using MY_CONTROLLER_URL_ADDRESS (but I am not entirely sure).

    If that doesn't help, take a look at https://github.com/mysensors/MySensors/issues/926
    It seems like the ESP8266 gateway will be unable to use DNS when using static IP configuration. In my experimental branch I have added DNS support, but it is not reliable and needs more work. You could try to use an IP address instead of m21.cloudmqtt.com - not sure if it helps but it could be worth trying.



  • This post is deleted!


  • @mfalkvidd said in esp8266 gateway doesn't connect to mqtt broker:

    @tsunami see if removing

    #define MY_PORT 11262
    helps. I think this define is only meant to be used when not using MY_CONTROLLER_URL_ADDRESS (but I am not entirely sure).

    If that doesn't help, take a look at https://github.com/mysensors/MySensors/issues/926
    It seems like the ESP8266 gateway will be unable to use DNS when using static IP configuration. In my experimental branch I have added DNS support, but it is not reliable and needs more work. You could try to use an IP address instead of m21.cloudmqtt.com - not sure if it helps but it could be worth trying.

    thanks alot everything works good now and gatewat has connected to the mqtt broker. but i can't connect it to the domiticz. domoticz topics are: domoticz/in/mymqtt
    but for gateway is different and i can't change for domoticz.


  • Mod



  • @mfalkvidd said in esp8266 gateway doesn't connect to mqtt broker:

    https://forum.mysensors.org/topic/5618/domoticz-now-supports-the-mysensors-mqtt-gateway/ might be useful

    thank you I've done it and works great. but I found it if node is offline and I put switch on or off in controller it works but when node get connect to the controller it doesn't update switch state. how to fix it?


  • Mod

    @tsunami program the sketch to fetch status at boot. See the first example at https://www.mysensors.org/build/dimmer for how it can be done.



  • This post is deleted!

Log in to reply
 

Suggested Topics

  • 3
  • 2
  • 15
  • 3
  • 2
  • 2

0
Online

11.2k
Users

11.1k
Topics

112.5k
Posts