Navigation

    • Register
    • Login
    • OpenHardware.io
    • Categories
    • Recent
    • Tags
    • Popular
    1. Home
    2. Tom71
    • Profile
    • Following
    • Followers
    • Topics
    • Posts
    • Best
    • Groups

    Tom71

    @Tom71

    0
    Reputation
    13
    Posts
    580
    Profile views
    0
    Followers
    2
    Following
    Joined Last Online
    Website tom71blog.wordpress.com/ Location Berlin, Germany

    Tom71 Follow

    Best posts made by Tom71

    This user hasn't posted anything yet.

    Latest posts made by Tom71

    • RE: My Slim 2AA Battery Node

      Did anybody tested this board with an ATSHA204A on A2? The ATSHA204A works with 2.0 to 5.5 V.

      posted in My Project
      Tom71
      Tom71
    • RE: Slim Node as a Mini 2AA Battery PIR Motion Sensor

      @Mikael-Kermorgant I'm using fhem. It is possible, that I can set an offline state after 20sec with fhem. I will try this.

      posted in My Project
      Tom71
      Tom71
    • RE: Slim Node as a Mini 2AA Battery PIR Motion Sensor

      Hello,
      I've successfuly uploaded these sketch to my Atmega328p. It works fine. Two things I want add:

      • I have changed the speed in the file MyConfig_h -> #define BAUD_RATE 9600 (otherwise I got nothing at the serial output)
      • The sensor sends an 1 on "motion". How can I send an 0 on "no Motion" after 20sec? (low on data pin?)

      Thank you

      posted in My Project
      Tom71
      Tom71
    • RE: My Slim 2AA Battery Node

      @bjacobse Which Optiboot loader did you exactly use? I can try it. I have an Arduino Pro Mini.

      posted in My Project
      Tom71
      Tom71
    • RE: My Slim 2AA Battery Node

      @bjacobse I'm out of fucus. What was the problem? Can you burn the bootloader+sketch with an USBtiny on an bare Atmgea328p? Connected on MISO/MOSI/SCK/RESET/VCC/GND?
      The Arduino Pro Mini is different from the Atmgea328p. On the arduino is an external clock.

      posted in My Project
      Tom71
      Tom71
    • RE: My Slim 2AA Battery Node

      @bjacobse I thought the USBtiny is only to upload the bootloader, not the mysensors software.
      I did two things:

      1. Burn the bootloader atmega328_1a.hex to an bare Atmega328p with an Arduino as ISP
      2. Upload an simple scetch to the Atmega with an RX/TX uploader (I used an USB to TTL with an FTDI and also an Ardunino Uno without the Atmega chip, like here http://forum.mysensors.org/uploads/files/1454449901412-7.png) Both are working.

      I'm still waiting for the PCB. After receiving I want to build the motion sensor.

      posted in My Project
      Tom71
      Tom71
    • RE: My Slim 2AA Battery Node

      @bjacobse Witch bootloader you have taken?

      posted in My Project
      Tom71
      Tom71
    • RE: My Slim 2AA Battery Node

      @m26872 Sure, but not with an bootloader (optiboot with intenal clock) on an bare Atmega. Later I will try this: http://forum.mysensors.org/uploads/files/1454449901412-7.png
      I build some MySensors with an Arduino Micro, but not with only an Atmega.

      Update: I don't know what's different, but this works. Perhaps I forget to connect Reset from FDL -> Pin 1.
      Now I can upload simple sketches.

      posted in My Project
      Tom71
      Tom71
    • RE: My Slim 2AA Battery Node

      @bjacobse No, used the bootloader from here (http://forum.mysensors.org/uploads/files/1443392692398-atmega328_1a.hex). This is an bootloader for the internal clock.
      Baud settings to upload the sketch or the bootloader?

      posted in My Project
      Tom71
      Tom71
    • RE: My Slim 2AA Battery Node

      Hello,
      I have problems to upload the scatch to the bare Amtel. I use an USB-TTL FTL Adaper and connect, RX/TX and Reset Pin with 100n->DTR. But I got always errors on uploading.

      The bootloader I have successfull burned with an raspberry pi and gpio (http://www.lxccu.com/hb-raspberry-bootloader-update😞

      sudo bin/avrdude -Cbin/avrdude.conf -p m328p -P gpio -c gpio -U lfuse:w:0x62:m -U hfuse:w:0xde:m -U efuse:w:0x07:m -U lock:w:0x2F:m -e -Uflash:w:1443392692398-atmega328_1a.hex:i
      avrdude: safemode: Fuses OK

      How can I got it working?
      Thank you

      Thomas

      posted in My Project
      Tom71
      Tom71