@Samuel235
Sorry. I will write in English.
I want order manufacture this device. But manufacturer said to me that he need gerber and bom files. I want know can I get this files from Ivan? May be I can get this files from design files? What programm need to this?
Worked. Reboot mysensors device and agocontrol had seen them. But only switch without sensors.
Hi all.
I use Raspbian jessie and Mysensors v1.5.
I can not connect mysensors sensor and Ago Control.
Getaway and agomysensors.service receive packet from sensor but not undestand it.
Please help me.
pi@agocontrol:~ $ sudo systemctl start agomysensors.service
pi@agocontrol:~ $ sudo systemctl status agomysensors.service
● agomysensors.service - ago control MySensors interface
Loaded: loaded (/lib/systemd/system/agomysensors.service; enabled)
Active: active (running) since Sun 2016-10-23 15:19:11 UTC; 5s ago
Main PID: 1204 (agoMySensors)
CGroup: /system.slice/agomysensors.service
└─1204 /opt/agocontrol/bin/agoMySensors
Oct 23 15:19:12 agocontrol agomysensors[1204]: DIGEST-MD5 make_client_response()
Oct 23 15:19:12 agocontrol agomysensors[1204]: DIGEST-MD5 create_layer_keys()
Oct 23 15:19:12 agocontrol agomysensors[1204]: DIGEST-MD5 client step 3
Oct 23 15:19:12 agocontrol agomysensors[1204]: Waiting for the gateway starts...
Oct 23 15:19:15 agocontrol agomysensors[1204]: Done.
Oct 23 15:19:15 agocontrol agomysensors[1204]: Requesting gateway version...
Oct 23 15:19:15 agocontrol agomysensors[1204]: found v1.5
Oct 23 15:19:15 agocontrol agomysensors[1204]: Initializing MySensors controller
Oct 23 15:19:15 agocontrol agomysensors[1204]: Register existing devices:
Oct 23 15:19:15 agocontrol agomysensors[1204]: Running MySensors controller...
Hint: Some lines were ellipsized, use -l to show in full.
pi@agocontrol:~ $ sudo systemctl status agomysensors.service
● agomysensors.service - ago control MySensors interface
Loaded: loaded (/lib/systemd/system/agomysensors.service; enabled)
Active: active (running) since Sun 2016-10-23 15:19:11 UTC; 5min ago
Main PID: 1204 (agoMySensors)
CGroup: /system.slice/agomysensors.service
└─1204 /opt/agocontrol/bin/agoMySensors
Oct 23 15:23:35 agocontrol agomysensors[1204]: No protocol version found for...t
Oct 23 15:23:40 agocontrol agomysensors[1204]: No protocol version found for...t
Oct 23 15:23:45 agocontrol agomysensors[1204]: No protocol version found for...t
Oct 23 15:23:50 agocontrol agomysensors[1204]: No protocol version found for...t
Oct 23 15:23:55 agocontrol agomysensors[1204]: No protocol version found for...t
Oct 23 15:24:00 agocontrol agomysensors[1204]: No protocol version found for...t
Oct 23 15:24:05 agocontrol agomysensors[1204]: No protocol version found for...t
Oct 23 15:24:10 agocontrol agomysensors[1204]: No protocol version found for...t
Oct 23 15:24:15 agocontrol agomysensors[1204]: No protocol version found for...t
Oct 23 15:24:20 agocontrol agomysensors[1204]: No protocol version found for...t
Hint: Some lines were ellipsized, use -l to show in full.
pi@agocontrol:~ $ /opt/agocontrol/bin/agoMySensors -d
2016-Oct-23 15:19:47.862621 [DEBUG] Using console log, level DEBUG
2016-Oct-23 15:19:48.141411 [DEBUG] Using uuidMapFile "/etc/opt/agocontrol/uuidmap/mysensors.json"
2016-Oct-23 15:19:48.155417 [DEBUG] Opening broker connection: localhost
2016-Oct-23 15:19:48.406645 [INFO] Waiting for the gateway starts...
2016-Oct-23 15:19:48.409229 [DEBUG] Opening serial port '/dev/ttyUSB0'...
2016-Oct-23 15:19:50.986593 [DEBUG] Read: parent=0, distance=0
2016-Oct-23 15:19:50.989693 [DEBUG] Read: ;Gateway startup complete.
2016-Oct-23 15:19:50.992372 [DEBUG] Startup string found, continue
2016-Oct-23 15:19:50.994967 [INFO] Done.
2016-Oct-23 15:19:50.997982 [INFO] Requesting gateway version...
2016-Oct-23 15:19:51.006023 [DEBUG] Read: 0;0;3;0;2;1.5
2016-Oct-23 15:19:51.009352 [INFO] found v1.5
2016-Oct-23 15:19:51.012073 [INFO] Initializing MySensors controller
2016-Oct-23 15:19:51.029061 [INFO] Register existing devices:
2016-Oct-23 15:19:51.032001 [INFO] Running MySensors controller...
2016-Oct-23 15:19:53.684006 [DEBUG] => RECEIVING: 101/2;SET;0;V_STATUS;0
2016-Oct-23 15:19:53.687611 [WARNING] No protocol version found for this message, drop it
2016-Oct-23 15:19:55.939434 [DEBUG] I_LOG_MESSAGE send payload: infos string is not valid [30.0]
2016-Oct-23 15:20:14.464399 [DEBUG] I_LOG_MESSAGE send payload: infos string is not valid [1]
2016-Oct-23 15:20:14.470550 [DEBUG] => RECEIVING: 101/3;SET;0;V_STATUS;0
2016-Oct-23 15:20:14.474548 [WARNING] No protocol version found for this message, drop it
@Samuel235
Sorry. I will write in English.
I want order manufacture this device. But manufacturer said to me that he need gerber and bom files. I want know can I get this files from Ivan? May be I can get this files from design files? What programm need to this?
@Ivan-Z Добрый день. Я тут новичек но мне ваше устройство хотелось бы попробовать. Я верно понимаю что тут не хватает документации что бы просто заказать производство плат (или изделий целиком)? Можете ли/хотите ли вы выложить их?
Many thanks.
Line 'sudo usermod -a -G dialout openhab' helped me.
@Harry-Gomez
That's all well done. does not work. It may be necessary to install any more bindings or the Java packages?
@ted
Hi
I use RASPBIAN JESSIE.
Command minicom -b 115200 -o -D /dev/ttyUSB0 show traffic from serial gateway.
I write -Dgnu.io.rxtx.SerialPorts=/dev/ttyUSB0 to /usr/share/openhab/bin/openhab.sh and /etc/init.d/openhab but still 'Unable to find Serial port '/dev/ttyUSB0''.
Please help me