It´s working and it´s better than before!
Thank you so much, you´re the man of the day!

This is really amazing and exactly what im searching for.
where do you get the PCB from?

All I get is this:
TSM:INIT
TSM:RADIO:OK
TSM:FPAR
TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSP:MSG:READ 0-0-255 s=255,c=3,t=8,pt=1,l=1,sg=0:0
TSP:MSG:FPAR RES (ID=0, dist=0)
TSP:MSG:PAR OK (ID=0, dist=1)
TSM:FPAR:OK
TSM:ID
TSP:MSG:SEND 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=ok:
TSP:MSG:READ 0-0-255 s=255,c=3,t=4,pt=0,l=2,sg=0:10
TSP:ASSIGNID:OK (ID=10)
TSM:CHKID:OK (ID=10)
TSM:UPL
TSP:PING:SEND (dest=0)
TSP:MSG:SEND 10-10-0-0 s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=ok:1
TSP:MSG:READ 0-0-10 s=255,c=3,t=25,pt=1,l=1,sg=0:1
TSP:MSG:PONG RECV (hops=1)
TSP:CHKUPL:OK
TSM:UPL:OK
TSM:READY
TSP:MSG:SEND 10-10-0-0 s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=ok:0100
TSP:MSG:SEND 10-10-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=ok:2.0.0
TSP:MSG:SEND 10-10-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=ok:0
TSP:MSG:READ 0-0-10 s=255,c=3,t=15,pt=6,l=2,sg=0:0100
TSP:MSG:READ 0-0-10 s=255,c=3,t=6,pt=0,l=1,sg=0:M
TSP:MSG:SEND 10-10-0-0 s=255,c=3,t=11,pt=0,l=17,sg=0,ft=0,st=ok:Rauchmeldermelder
TSP:MSG:SEND 10-10-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,ft=0,st=ok:1.0
TSP:MSG:SEND 10-10-0-0 s=12,c=0,t=23,pt=0,l=0,sg=0,ft=0,st=ok:
Request registration...
!TSP:MSG:SEND 10-10-0-0 s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=fail:2
TSP:MSG:SEND 10-10-0-0 s=255,c=3,t=26,pt=1,l=1,sg=0,ft=1,st=ok:2
TSP:MSG:READ 0-0-10 s=255,c=3,t=27,pt=1,l=1,sg=0:1
Node registration=1
Init complete, id=10, parent=0, distance=1, registration=1
1
TSP:MSG:SEND 10-10-0-0 s=12,c=1,t=35,pt=2,l=2,sg=0,ft=0,st=ok:1
97
TSP:MSG:SEND 10-10-0-0 s=12,c=1,t=35,pt=2,l=2,sg=0,ft=0,st=ok:97
1
TSP:MSG:SEND 10-10-0-0 s=12,c=1,t=35,pt=2,l=2,sg=0,ft=0,st=ok:1
97
TSP:MSG:SEND 10-10-0-0 s=12,c=1,t=35,pt=2,l=2,sg=0,ft=0,st=ok:97
1
TSP:MSG:SEND 10-10-0-0 s=12,c=1,t=35,pt=2,l=2,sg=0,ft=0,st=ok:1

I´ve changed it to #define SND_SENSOR_ANALOG_PIN A0
but the result is the same

Yes of course.
I thouht that means A0

The output is everytime the same:
TSP:MSG:SEND 10-10-0-0 s=12,c=1,t=35,pt=2,l=2,sg=0,ft=0,st=ok:97
and when I play with the potentiometer this comes out:
TSP:MSG:SEND 10-10-0-0 s=12,c=1,t=35,pt=2,l=2,sg=0,ft=0,st=ok:1

In FHEM I got the following values:
mapReading_value112 12 value1
mapReading_value212 12 value2
mapReading_value312 12 value3
mapReading_value412 12 value4
mapReading_value512 12 value5

setReading_value112 1
setReading_value212 1
setReading_value312 1
setReading_value412 1
setReading_value512 1
I don´t know what that means but it´s useless

Hi,
I have a Soundsensor (http://www.satistronics.com/images/l/1255/3807.jpg) to determine if a smoke detector has been activated.
My Sketch is the following but I´m not the best in Coding so maybe someone can help me because it doesn´t work
Output: TSP:MSG:SEND 10-10-0-0 s=12,c=1,t=35,pt=2,l=2,sg=0,ft=0,st=ok:97

// Enable debug prints to serial monitor
#define MY_DEBUG 

#define MY_RADIO_NRF24
#include <SPI.h>
#include <MySensors.h>  
#include <Wire.h>

#define CHILD_ID 12   // Id of the sensor child
#define SND_SENSOR_ANALOG_PIN 0

unsigned long SLEEP_TIME = 5; // Sleep time between reads (in seconds)

MyMessage msg(CHILD_ID, V_VOLUME);
int lastSND = -1;
 
void presentation()  
{ 
  // Send the sketch version information to the gateway and Controller
  sendSketchInfo("Rauchmeldermelder", "1.0");

  // Register all sensors to gateway (they will be created as child devices)
  present(CHILD_ID, S_CUSTOM);

   pinMode(SND_SENSOR_ANALOG_PIN, INPUT);

}

void loop()     
{     
 
 
  int SND = map(analogRead(SND_SENSOR_ANALOG_PIN), 0, 1024, 100, 0);
 
  if (SND != lastSND) {
    Serial.println(SND);
    send(msg.set(SND));
    lastSND = SND;
  }
sleep(3000);
}```

THANK YOU!!

Has anybody updated the RFID-Sketch to MySensors v2 ?
It´s not in the examples-list

Thanks, Dave

It´s working and it´s better than before!
Thank you so much, you´re the man of the day!

Hey,
sounds great, I´ll test it as soon as possible.

thank you!!!