@stingone
Hi. The same issue for me . I solve it with : 38400 bauds configuration serial port ( instead of 115200 default value)
and i lowering the RF power output with low_pa enable: it confirms that I have some issues with power suppply.

good luck

Good topic :Accuracy, and voltage range.

I don"t want to use any more the DHT22. Humidity results are not comparaible with sensiron and other captors results.
We can add humidity and accuracy...
Lot of people forget to filter power supply, and check voltage range with measurements.

@stingone
Hi. The same issue for me . I solve it with : 38400 bauds configuration serial port ( instead of 115200 default value)
and i lowering the RF power output with low_pa enable: it confirms that I have some issues with power suppply.

good luck

@remis

I confirm that i can suppress the compilation error but nothing append on serial port...

Could somebody write here the typical serial port output with debug available?

This example is not working. What is the good solution to use this temperature sensor ?

thanks

@mrwomble

Hello mrwomble.

Could you detail the file you have use to compile OK ? Do we need to use the full library? I plan to use local file with
#include "filename.h"
instead of
#include <filename.h>
Thanks