I found this one, it costs about 28$
http://www.aliexpress.com/item/TV-Box-android-box-smart-box-tvbox-dvb-box-android-receiver-smartbox-RK3188-amlogic-stb-ip/32213496276.html

I need this feature. Where is your branch?

• What are the differences between Rev2 & Rev3?
• Why do we have Dallas temp. sensor?

I need this feature. Where is your branch?

I'm trying to connect the RF24 directly to RPi

Try to clear the EEPROM first, then re-upload your sketch.

Try to move your AC cables a little bit away from the nodes. Just to avoid any possible EMF activity.

Is there any open source port for MySensors API in C# for RPi

@EasyIoT Can you share your implementation for MySensorsDriver?

What is the exact meaning of the debug lines;

Ex:
send: 30-30-0-0 s=1,c=0,t=3,pt=0,l=5,st=ok:1.4.1
send: 30-30-0-0 s=2,c=0,t=3,pt=0,l=5,st=ok:1.4.1
read: 0-0-10 s=1,c=1,t=2,pt=0,l=1:0
send: 0-30-10-10 s=1,c=1,t=2,pt=0,l=1,st=ok:0
read: 0-0-10 s=2,c=1,t=2,pt=0,l=1:0
send: 0-30-10-10 s=2,c=1,t=2,pt=0,l=1,st=ok:0
read: 0-0-10 s=2,c=1,t=2,pt=0,l=1:1
send: 0-30-10-10 s=2,c=1,t=2,pt=0,l=1,st=ok:1
read: 0-0-10 s=1,c=1,t=2,pt=0,l=1:1
send: 0-30-10-10 s=1,c=1,t=2,pt=0,l=1,st=ok:1

thanks

I'm a newbie with MySensors. I did my homework to study the getting started section, building my gateway, sensors and actuators as provided in the examples. and everything works great.

In order to build my custom nodes I've started by the hardware wiring. Now I have 3 custom nodes full of sensors and actuators.
My problem now is how can I use MySensors API. I don't know where to start. I need a resource that helps me to understand the mysterious classes like (MyGateway, MySensor, MyMQTT, ... etc).