Navigation

    • Register
    • Login
    • OpenHardware.io
    • Categories
    • Recent
    • Tags
    • Popular
    1. Home
    2. stocken
    • Profile
    • Following
    • Followers
    • Topics
    • Posts
    • Best
    • Groups

    stocken

    @stocken

    0
    Reputation
    3
    Posts
    467
    Profile views
    0
    Followers
    0
    Following
    Joined Last Online

    stocken Follow

    Best posts made by stocken

    This user hasn't posted anything yet.

    Latest posts made by stocken

    • RE: Using the "Selector switch" in Domoticz (tutorial)

      Greetings!

      So i have a ledstrip and i am using your sketch straight off.
      I do not have a physical button connected, but the code for the button is still there.

      I have setup a Selector Switch in domoticz like in your example, but i doesnt work with the values 2,3,4 etc. the patterns doesnt start.
      If i change it to http://192.168.1.30:8090/json.htm?type=command&param=switchlight&idx=157&switchcmd=Set Level&level=25 i get the alarm blinking red and white.

      what are the values for each pattern in your "moodlight" sketch?
      Or do i have to add something to the sketch for it to work?

      posted in Domoticz
      stocken
      stocken
    • RE: 3-in-1 Humidity Temp and Motion

      Hi,
      I took your updated code for 2.0 and tried to add a relay.
      The code looks like this:

      #define MY_DEBUG
      
      // Enable and select radio type attached
      #define MY_RADIO_NRF24
      //#define MY_RADIO_RFM69
      
      #include <SPI.h>
      #include <MySensors.h>  
      #include <DHT.h>  
      
      #define CHILD_ID_HUM 10
      #define CHILD_ID_TEMP 11
      #define CHILD_ID_MOT 12 //motion sensor
      
      
      #define HUMIDITY_SENSOR_DIGITAL_PIN 4
      #define DIGITAL_INPUT_SENSOR 3   // The digital input you attached your motion sensor.  (Only 2 and 3 generates interrupt!)
      
      #define RELAY_1  7  // Arduino Digital I/O pin number for first relay (second on pin+1 etc)
      #define NUMBER_OF_RELAYS 1 // Total number of attached relays
      #define CHILD_ID 5
      #define RELAY_ON 1  // GPIO value to write to turn on attached relay
      #define RELAY_OFF 0 // GPIO value to write to turn off attached relay
      
      
      DHT dht;
      float lastTemp;
      float lastHum;
      boolean metric = true; 
      
      unsigned long interval= 3000;//dht.getMinimumSamplingPeriod(); // the time we need to wait
      unsigned long previousMillis=0; // millis() returns an unsigned long.
      unsigned long SLEEP_TIME = 120000; // Sleep time between reports (in milliseconds)
      
      MyMessage msgHum(CHILD_ID_HUM, V_HUM);
      MyMessage msgTemp(CHILD_ID_TEMP, V_TEMP);
      MyMessage msgMot(CHILD_ID_MOT, V_TRIPPED); //me
      
      
      void before()
      {
      	for (int sensor=1, pin=RELAY_1; sensor<=NUMBER_OF_RELAYS; sensor++, pin++) {
      		// Then set relay pins in output mode
      		pinMode(pin, OUTPUT);
      		// Set relay to last known state (using eeprom storage)
      		digitalWrite(pin, loadState(sensor)?RELAY_ON:RELAY_OFF);
      	}
      }
      
      void setup()  
      { 
        dht.setup(HUMIDITY_SENSOR_DIGITAL_PIN); 
      
       // metric = getConfig().isMetric;
      
       pinMode(DIGITAL_INPUT_SENSOR, INPUT);      // sets the motion sensor digital pin as input
      }
      
      void presentation()  
      { 
        // Send the Sketch Version Information to the Gateway
        sendSketchInfo("4-1 Sensor", "1.0");
      
        // Register all sensors to gw (they will be created as child devices)
        present(CHILD_ID_HUM, S_HUM);
        present(CHILD_ID_TEMP, S_TEMP);
        present(CHILD_ID_MOT, V_TRIPPED); //me
        
        for (int sensor=1, pin=RELAY_1; sensor<=NUMBER_OF_RELAYS; sensor++, pin++) {
      	// Register all sensors to gw (they will be created as child devices)
      	present(sensor, S_BINARY);
      	}
      }
      
      void loop()      
      {  
        // Read digital motion value
        boolean tripped = digitalRead(DIGITAL_INPUT_SENSOR) == HIGH;
         
      // only run loop if time has passed. 
      unsigned long currentMillis = millis(); // grab current time       
      
       // check if "interval" time has passed
       if ((unsigned long)(currentMillis - previousMillis) >= interval) {
      
       
             send(msgMot.set(tripped?"1":"0")); 
                    
        
            #ifdef MY_DEBUG
             Serial.print("Motion: ");
             Serial.println(tripped);
            #endif
      
      
      
       
        
        // Fetch temperatures from DHT sensor
        float temperature = dht.getTemperature();
        if (isnan(temperature)) {
            Serial.println("Failed reading temperature from DHT");
        } else if (temperature != lastTemp) {
          lastTemp = temperature;
          if (!metric) {
            temperature = dht.toFahrenheit(temperature);
          }
          send(msgTemp.set(temperature, 1));
          #ifdef MY_DEBUG
          Serial.print("T: ");
          Serial.println(temperature);
          #endif
        }
       
        // Fetch humidity from DHT sensor
        float humidity = dht.getHumidity();
        if (isnan(humidity)) {
            Serial.println("Failed reading humidity from DHT");
        } else if (humidity != lastHum) {
            lastHum = humidity;
            send(msgHum.set(humidity, 1));
            #ifdef MY_DEBUG
            Serial.print("H: ");
            Serial.println(humidity);
            #endif
        }   
      
      
      
      
         // save the "current" time
         previousMillis = millis();
      
       }  
        // Sleep until interrupt comes in on motion sensor. Send update every two minute.
        //sleep(digitalPinToInterrupt(DIGITAL_INPUT_SENSOR), CHANGE, SLEEP_TIME);
      
      }
      
      void receive(const MyMessage &message)
      {
      	// We only expect one type of message from controller. But we better check anyway.
      	if (message.type==V_STATUS) {
      		// Change relay state
      		digitalWrite(message.sensor-1+RELAY_1, message.getBool()?RELAY_ON:RELAY_OFF);
      		// Store state in eeprom
      		saveState(message.sensor, message.getBool());
      		// Write some debug info
      		Serial.print("Incoming change for sensor:");
      		Serial.print(message.sensor);
      		Serial.print(", New status: ");
      		Serial.println(message.getBool());
      	}
      }
      

      However, when i look in domoticz the relay isnt presented as a child.
      Plus, the motion sensor is called "S_LIGHT_LEVEL" and not "S_MOTION" as it does in my other device (that only have temp, hum motion and not a relay in the sketch).
      temp/hum sensor and motion sensor works as intended in domoticz.
      My first though is that the motion and relay somehow is a bit mixed up by the sketch, but im kinda new to this so im not sure.
      Would really appreciate if someone can look at the sketch and see if there is any obvious problem 🙂

      posted in My Project
      stocken
      stocken
    • RE: 💬 Relay

      greetings, i have an idea to use a 12volt fan to move some air from one room to the room next to it (the first room has a stove for heating).
      and i was thinking a relay would do the trick so i dont manually have to start it (and a nice script in domoticz that uses the data from the temp sensor + the ability to manually turn it on/off in domoticz).
      now to my question: which relay should i get?
      I looked at the ones in the store but it seems they are either for 230VAC or 5VDC

      posted in Announcements
      stocken
      stocken