Navigation

    • Register
    • Login
    • OpenHardware.io
    • Categories
    • Recent
    • Tags
    • Popular
    1. Home
    2. HogBil
    • Profile
    • Following
    • Followers
    • Topics
    • Posts
    • Best
    • Groups

    HogBil

    @HogBil

    0
    Reputation
    5
    Posts
    419
    Profile views
    0
    Followers
    0
    Following
    Joined Last Online
    Location Greenville, TX Age 43

    HogBil Follow

    Best posts made by HogBil

    This user hasn't posted anything yet.

    Latest posts made by HogBil

    • RE: MQTT Gateway help - keeps intializing

      I never got a 100% solution. I finally tried enough times. I think I turned it on with no Ethernet plugged in, let it boot, plugged in Ethernet and pressed the reset button. It may be the other way around, but it definitely involved having to use the reset button. Hope it helps, I may try to power cycle mine later and get a better procedure.

      posted in Troubleshooting
      HogBil
      HogBil
    • RE: MQTT Gateway help - keeps intializing

      Thanks. I'll try some different power supplies tonight and see if I get anything useful from the debug of my node. Is there anything to be gleaned from the LED's on my arduino/shield? It seems to be in that continuous state of trying to connect. But that is just me guessing. I'll let you know what I come up with.

      posted in Troubleshooting
      HogBil
      HogBil
    • RE: MQTT Gateway help - keeps intializing

      Thanks tboha. That got it working, but.....My gateway only connects to the router when I have it hooked up to my PC. If I plug it into a 2A USB power supply it never shows up on my router and doesn't work with OpenHAB. Any suggestions? Thanks again.

      posted in Troubleshooting
      HogBil
      HogBil
    • RE: MQTT Gateway help - keeps intializing

      Gateway - Arduino Duemilanove with ethernet shield.
      Sensor - knock off Nano
      Mosquitto Broker -cRaspberry Pi

      posted in Troubleshooting
      HogBil
      HogBil
    • MQTT Gateway help - keeps intializing

      Had it working with no controller and could operate my mysensors relay via mosquitto_pub. After trying to use with OpenHAB, My gateway will not work. It keeps cycling through the initialization repeatedly. see log below

      0;255;3;0;9;MCO:BGN:INIT GW,CP=RNNGA--,VER=2.1.1
      0;255;3;0;9;TSM:INIT
      0;255;3;0;9;TSF:WUR:MS=0
      0;255;3;0;9;TSM:INIT:TSP OK
      0;255;3;0;9;TSM:INIT:GW MODE
      0;255;3;0;9;TSM:READY:ID=0,PAR=0,DIS=0
      0;255;3;0;9;MCO:REG:NOT NEEDED
      IP: 192.168.1.80
      0;255;3;0;9;MCO:BGN:STP
      0;255;3;0;9;MCO:BGN:INIT OK,TSP=1
      IP: 192.168.1.80
      0;255;3;0;9;Attempting MQTT connection...
      0;255;3;0;9;MQTT connected
      0;255;3;0;9;Sending message on topic: mygateway1-out/0/255/0/0/18
      0;255;3;0;9;Message arrived on topic: mygateway1-in/1/1/1/0/2
      0;255;3;0;9;!TSF:RTE:1 UNKNOWN
      0;255;3;0;9;!TSF:MSG:SEND,0-0-1-1,s=1,c=1,t=2,pt=0,l=1,sg=0,ft=0,st=NACK:0
      0;255;3;0;9;MCO:BGN:INIT GW,CP=RNNGA--,VER=2.1.1
      0;255;3;0;9;TSM:INIT
      0;255;3;0;9;TSF:WUR:MS=0
      0;255;3;0;9;TSM:INIT:TSP OK
      0;255;3;0;9;TSM:INIT:GW MODE
      0;255;3;0;9;TSM:READY:ID=0,PAR=0,DIS=0
      0;255;3;0;9;MCO:REG:NOT NEEDED
      IP: 192.168.1.80
      0;255;3;0;9;MCO:BGN:STP
      0;255;3;0;9;MCO:BGN:INIT OK,TSP=1
      IP: 192.168.1.80
      0;255;3;0;9;Attempting MQTT connection...
      0;255;3;0;9;MQTT connected
      0;255;3;0;9;Sending message on topic: mygateway1-out/0/255/0/0/18
      0;255;3;0;9;Message arrived on topic: mygateway1-in/1/1/1/0/2
      0;255;3;0;9;!TSF:RTE:1 UNKNOWN
      0;255;3;0;9;!TSF:MSG:SEND,0-0-1-1,s=1,c=1,t=2,pt=0,l=1,sg=0,ft=0,st=NACK:0
      0;255;3;0;9;MCO:BGN:INIT GW,CP=RNNGA--,VER=2.1.1
      0;255;3;0;9;TSM:INIT
      0;255;3;0;9;TSF:WUR:MS=0
      0;255;3;0;9;TSM:INIT:TSP OK
      0;255;3;0;9;TSM:INIT:GW MODE
      0;255;3;0;9;TSM:READY:ID=0,PAR=0,DIS=0
      0;255;3;0;9;MCO:REG:NOT NEEDED
      IP: 192.168.1.80
      0;255;3;0;9;MCO:BGN:STP
      0;255;3;0;9;MCO:BGN:INIT OK,TSP=1
      IP: 192.168.1.80
      0;255;3;0;9;Attempting MQTT connection...
      0;255;3;0;9;MQTT connected
      0;255;3;0;9;Sending message on topic: mygateway1-out/0/255/0/0/18
      0;255;3;0;9;Message arrived on topic: mygateway1-in/1/1/1/0/2
      0;255;3;0;9;!TSF:RTE:1 UNKNOWN
      0;255;3;0;9;!TSF:MSG:SEND,0-0-1-1,s=1,c=1,t=2,pt=0,l=1,sg=0,ft=0,st=NACK:0
      0;255;3;0;9;MCO:BGN:INIT GW,CP=RNNGA--,VER=2.1.1
      0;255;3;0;9;TSM:INIT
      0;255;3;0;9;TSF:WUR:MS=0
      0;255;3;0;9;TSM:INIT:TSP OK
      0;255;3;0;9;TSM:INIT:GW MODE
      0;255;3;0;9;TSM:READY:ID=0,PAR=0,DIS=0
      0;255;3;0;9;MCO:REG:NOT NEEDED
      IP: 192.168.1.80
      0;255;3;0;9;MCO:BGN:STP
      0;255;3;0;9;MCO:BGN:INIT OK,TSP=1
      IP: 192.168.1.80
      0;255;3;0;9;Attempting MQTT connection...
      0;255;3;0;9;MQTT connected
      0;255;3;0;9;Sending message on topic: mygateway1-out/0/255/0/0/18
      0;255;3;0;9;Message arrived on topic: mygateway1-in/1/1/1/0/2
      0;255;3;0;9;!TSF:RTE:1 UNKNOWN
      0;255;3;0;9;!TSF:MSG:SEND,0-0-1-1,s=1,c=1,t=2,pt=0,l=1,sg=0,ft=0,st=NACK:0

      posted in Troubleshooting
      HogBil
      HogBil