Problem solved! The 3.3v Form arduino nano was too Bad for the nrf24l01j pa lna with PA_LEVEL MAX. NOW i usw an external regulator an everything is fine 
sorry for this newbie fault 
joschre
@joschre
1
Reputation
3
Posts
256
Profile views
0
Followers
0
Following
Best posts made by joschre
-
RE: 💬 Dimmable LED Actuatorposted in Announcements
Latest posts made by joschre
-
RE: 💬 Dimmable LED Actuatorposted in Announcements
Problem solved! The 3.3v Form arduino nano was too Bad for the nrf24l01j pa lna with PA_LEVEL MAX. NOW i usw an external regulator an everything is fine
sorry for this newbie fault -
RE: 💬 Dimmable LED Actuatorposted in Announcements
oh, i use mysensors serial gateway connected to a raspberry with fhem running.
-
RE: 💬 Dimmable LED Actuatorposted in Announcements
hi, i used the example sketch. i also changed from "delay" to "wait" in fade section. The problem: i can change the percentage for example 8 times and then the gateway crashes and reboots. In a other case it works 12 times and then the gateway crashes. All other nodes (Temp, Hum) works fine all the time.