maddinthebrain

maddinthebrain

First a great compliment for this work! This should make things just easy, but...
It doesn't work for me. I have Ethernet Gateway and a 1wire Tempsensor node. Both flashed with the sketches from tutorials found on the mysensors.org website. Those are working without any problem.

Now I have Tsl2561 Lux sensor. This is supported by nodemanager. Just downloaded the latest dev version uncommented two lines as expected, but it the node won't appear.

The sketch looks as followed

/*
* The MySensors Arduino library handles the wireless radio link and protocol
* between your home built sensors/actuators and HA controller of choice.
* The sensors forms a self healing radio network with optional repeaters. Each
* repeater and gateway builds a routing tables in EEPROM which keeps track of the
* network topology allowing messages to be routed to nodes.
*
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
* Copyright (C) 2013-2017 Sensnology AB
* Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
*
* Documentation: http://www.mysensors.org
* Support Forum: http://forum.mysensors.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/

/**************************
Template

This sketch can be used as a template since containing the most relevant MySensors library configuration settings, 
NodeManager's settings, all its the supported sensors commented out and a sketch structure fully functional to operate with
NodeManager. Just uncomment the settings you need and the sensors you want to add and configure the sensors in before()
*/

/**********************************
 * MySensors node configuration
 */

// General settings
#define SKETCH_NAME "NodeManager"
#define SKETCH_VERSION "1.0"
//#define MY_DEBUG
//#define MY_NODE_ID 99

// NRF24 radio settings
#define MY_RADIO_NRF24
//#define MY_RF24_ENABLE_ENCRYPTION
//#define MY_RF24_CHANNEL 125
//#define MY_RF24_PA_LEVEL RF24_PA_HIGH
//#define MY_DEBUG_VERBOSE_RF24
//#define MY_RF24_DATARATE RF24_250KBPS

// RFM69 radio settings
//#define MY_RADIO_RFM69
//#define MY_RFM69_FREQUENCY RFM69_433MHZ
//#define MY_IS_RFM69HW
//#define MY_RFM69_NEW_DRIVER
//#define MY_RFM69_ENABLE_ENCRYPTION
//#define MY_RFM69_NETWORKID 100
//#define MY_DEBUG_VERBOSE_RFM69
//#define MY_RF69_IRQ_PIN D1
//#define MY_RF69_IRQ_NUM MY_RF69_IRQ_PIN
//#define MY_RF69_SPI_CS D2
//#define MY_RFM69_ATC_MODE_DISABLED

// RFM95 radio settings
//#define MY_RADIO_RFM95
//#define MY_RFM95_FREQUENCY (RFM95_868MHZ)
//#define MY_DEBUG_VERBOSE_RFM95
//#define MY_RFM95_MAX_POWER_LEVEL_DBM (20)
//#define MY_RFM95_IRQ_PIN D1
//#define MY_RFM95_IRQ_NUM MY_RFM95_IRQ_PIN
//#define MY_RFM95_CS_PIN D8

// RS485 serial transport settings
//#define MY_RS485
//#define MY_RS485_BAUD_RATE 9600
//#define MY_RS485_DE_PIN 2
//#define MY_RS485_MAX_MESSAGE_LENGTH 40
//#define MY_RS485_HWSERIAL Serial1

// Message signing settings
//#define MY_SIGNING_SOFT
//#define MY_SIGNING_SOFT_RANDOMSEED_PIN 7
//#define MY_SIGNING_REQUEST_SIGNATURES
//#define MY_SIGNING_ATSHA204
//#define MY_SIGNING_ATSHA204_PIN 4
//#define MY_SIGNING_REQUEST_SIGNATURES

// OTA Firmware update settings
//#define MY_OTA_FIRMWARE_FEATURE
//#define OTA_WAIT_PERIOD 300
//#define FIRMWARE_MAX_REQUESTS 2
//#define MY_OTA_RETRY 2

// OTA debug output
//#define MY_DEBUG_OTA (0)
//#define MY_OTA_LOG_SENDER_FEATURE
//#define MY_OTA_LOG_RECEIVER_FEATURE
//#define MY_DEBUG_OTA_DISABLE_ACK

// Advanced settings
#define MY_BAUD_RATE 9600
//#define MY_SMART_SLEEP_WAIT_DURATION_MS 500
#define MY_SPLASH_SCREEN_DISABLED
//#define MY_DISABLE_RAM_ROUTING_TABLE_FEATURE
//#define MY_SIGNAL_REPORT_ENABLED

// Optimizations when running on 2032 Coin Cell. Also set nodeManager.setSleepBetweenSend(500) and run the board at 1Mhz
//#define MY_TRANSPORT_UPLINK_CHECK_DISABLED
//#define MY_TRANSPORT_WAIT_READY_MS  5000
//#define MY_SLEEP_TRANSPORT_RECONNECT_TIMEOUT_MS 2000
//#define MY_PARENT_NODE_ID 0
//#define MY_PARENT_NODE_IS_STATIC

/**********************************
 * MySensors gateway configuration
 */
 
// Common gateway settings
//#define MY_REPEATER_FEATURE

// Serial gateway settings
//#define MY_GATEWAY_SERIAL

// Ethernet gateway settings
//#define MY_GATEWAY_W5100

// ESP8266 gateway settings
//#define MY_GATEWAY_ESP8266
//#define MY_ESP8266_SSID ""
//#define MY_ESP8266_PASSWORD ""

// Gateway networking settings
//#define MY_IP_ADDRESS 192,168,178,87
//#define MY_IP_GATEWAY_ADDRESS 192,168,178,1
//#define MY_IP_SUBNET_ADDRESS 255,255,255,0
//#define MY_PORT 5003
//#define MY_GATEWAY_MAX_CLIENTS 2
//#define MY_USE_UDP

// Gateway MQTT settings
//#define MY_GATEWAY_MQTT_CLIENT
//#define MY_CONTROLLER_IP_ADDRESS 192, 168, 178, 68
//#define MY_PORT 1883
//#define MY_MQTT_USER "username"
//#define MY_MQTT_PASSWORD "password"
//#define MY_MQTT_CLIENT_ID "mysensors-1"
//#define MY_MQTT_PUBLISH_TOPIC_PREFIX "mygateway1-out"
//#define MY_MQTT_SUBSCRIBE_TOPIC_PREFIX "mygateway1-in"

// Gateway inclusion mode
//#define MY_INCLUSION_MODE_FEATURE
//#define MY_INCLUSION_BUTTON_FEATURE
//#define MY_INCLUSION_MODE_DURATION 60
//#define MY_DEFAULT_LED_BLINK_PERIOD 300

// Gateway Leds settings
//#define MY_DEFAULT_ERR_LED_PIN 4
//#define MY_DEFAULT_RX_LED_PIN  5
//#define MY_DEFAULT_TX_LED_PIN  6

/***********************************
 * NodeManager configuration
 */

#define NODEMANAGER_DEBUG ON
#define NODEMANAGER_INTERRUPTS ON
#define NODEMANAGER_SLEEP OFF
#define NODEMANAGER_RECEIVE OFF
#define NODEMANAGER_DEBUG_VERBOSE ON
#define NODEMANAGER_POWER_MANAGER OFF
#define NODEMANAGER_CONDITIONAL_REPORT OFF
#define NODEMANAGER_EEPROM OFF
#define NODEMANAGER_TIME OFF
#define NODEMANAGER_RTC OFF
#define NODEMANAGER_SD OFF
#define NODEMANAGER_HOOKING OFF
#define NODEMANAGER_OTA_CONFIGURATION OFF
#define NODEMANAGER_SERIAL_INPUT OFF

// import NodeManager library (a nodeManager object will be then made available)
#include <MySensors_NodeManager.h>

/***********************************
 * Add your sensors
 */

//PowerManager power(5,6);
 
//#include <sensors/SensorBattery.h>
//SensorBattery battery;

//#include <sensors/SensorConfiguration.h>
//SensorConfiguration configuration;

//#include <sensors/SensorSignal.h>
//SensorSignal signal;

//#include <sensors/SensorAnalogInput.h>
//SensorAnalogInput analog(A0);

//#include <sensors/SensorLDR.h>
//SensorLDR ldr(A0);

//#include <sensors/SensorRain.h>
//SensorRain rain(A0);

//#include <sensors/SensorSoilMoisture.h>
//SensorSoilMoisture soil(A0);

//#include <sensors/SensorThermistor.h>
//SensorThermistor thermistor(A0);

//#include <sensors/SensorML8511.h>
//SensorML8511 ml8511(A0);

//#include <sensors/SensorACS712.h>
//SensorACS712 acs712(A0);

//#include <sensors/SensorDigitalInput.h>
//SensorDigitalInput digitalIn(6);

//#include <sensors/SensorDigitalOutput.h>
//SensorDigitalOutput digitalOut(6);

//#include <sensors/SensorRelay.h>
//SensorRelay relay(6);

//#include <sensors/SensorLatchingRelay1Pin.h>
//SensorLatchingRelay1Pin latching1pin(6);

//#include <sensors/SensorLatchingRelay2Pins.h>
//SensorLatchingRelay2Pins latching2pins(6,7);

//#include <sensors/SensorDHT11.h>
//SensorDHT11 dht11(6);

//#include <sensors/SensorDHT22.h>
//SensorDHT22 dht22(6);

//#include <sensors/SensorSHT21.h>
//SensorSHT21 sht21;

//#include <sensors/SensorHTU21D.h>
//SensorHTU21D htu21;

//#include <sensors/SensorInterrupt.h>
//SensorInterrupt interrupt(3);

//#include <sensors/SensorDoor.h>
//SensorDoor door(3);

//#include <sensors/SensorMotion.h>
//SensorMotion motion(3);

//#include <sensors/SensorDs18b20.h>
//SensorDs18b20 ds18b20(6);

//#include <sensors/SensorBH1750.h>
//SensorBH1750 bh1750;

//#include <sensors/SensorMLX90614.h>
//SensorMLX90614 mlx90614;

//#include <sensors/SensorBME280.h>
//SensorBME280 bme280;

//#include <sensors/SensorBMP085.h>
//SensorBMP085 bmp085;

//#include <sensors/SensorBMP180.h>
//SensorBMP180 bmp180;

//#include <sensors/SensorBMP280.h>
//SensorBMP280 bmp280;

//#include <sensors/SensorSonoff.h>
//SensorSonoff sonoff;

//#include <sensors/SensorHCSR04.h>
//SensorHCSR04 hcsr04(6,7);

//#include <sensors/SensorMCP9808.h>
//SensorMCP9808 mcp9808;

//#include <sensors/SensorMQ.h>
//SensorMQ mq(A0);

//#include <sensors/SensorMHZ19.h>
//SensorMHZ19 mhz19(6,7);

//#include <sensors/SensorAM2320.h>
//SensorAM2320 am2320;

#include <sensors/SensorTSL2561.h>
SensorTSL2561 tsl2561;

//#include <sensors/SensorPT100.h>
//SensorPT100 pt100(6);

//#include <sensors/SensorDimmer.h>
//SensorDimmer dimmer(3);

//#include <sensors/SensorRainGauge.h>
//SensorRainGauge rainGauge(3);

//#include <sensors/SensorPowerMeter.h>
//SensorPowerMeter powerMeter(3);

//#include <sensors/SensorWaterMeter.h>
//SensorWaterMeter waterMeter(3);

//#include <sensors/SensorPlantowerPMS.h>
//SensorPlantowerPMS pms(6,7);

//#include <sensors/SensorVL53L0X.h>
//SensorVL53L0X vl53l0x(3);

//#include <sensors/DisplaySSD1306.h>
//DisplaySSD1306 ssd1306;

//#include <sensors/SensorSHT31.h>
//SensorSHT31 sht31;

//#include <sensors/SensorSI7021.h>
//SensorSI7021 si7021;

//#include <sensors/SensorChirp.h>
//SensorChirp chirp;

//#include <sensors/DisplayHD44780.h>
//DisplayHD44780 hd44780;

//#include <sensors/SensorTTP.h>
//SensorTTP ttp;

//#include <sensors/SensorServo.h>
//SensorServo servo(6);

//#include <sensors/SensorAPDS9960.h>
//SensorAPDS9960 apds9960(3);

//#include <sensors/SensorNeopixel.h>
//SensorNeopixel neopixel(6);

//#include <sensors/SensorSDS011.h>
//SensorSDS011 sds011(6,7);

//#include <sensors/SensorFPM10A.h>
//SensorFPM10A fpm10a(4,5);

//#include <sensors/SensorPH.h>
//SensorPH ph(A0);

//#include <sensors/SensorPca9685W.h>
//SensorPca9685W pca9685W;

//#include <sensors/SensorPca9685Rgb.h>
//SensorPca9685Rgb pca9685Rgb;

//#include <sensors/SensorPca9685Rgbw.h>
//SensorPca9685Rgbw pca9685Rgbw;

//#include <sensors/SensorDSM501A.h>
//SensorDSM501A DSM501A;

//#include <sensors/SensorPN532.h>
//SensorPN532 pn532;

//#include <sensors/SensorCCS811.h>
//SensorCCS811 ccs811;

//#include <sensors/SensorGSM.h>
//SensorGSM gsm(6,7);

/***********************************
 * Main Sketch
 */

// before
void before() {
	
  /***********************************
   * Configure your sensors
   */
   
  // report measures of every attached sensors every 10 seconds
  nodeManager.setReportIntervalSeconds(10);
  // report measures of every attached sensors every 10 minutes
  //nodeManager.setReportIntervalMinutes(10);
  // set the node to sleep in 30 seconds cycles
  //nodeManager.setSleepSeconds(30);
  // set the node to sleep in 5 minutes cycles
  //nodeManager.setSleepMinutes(5);
  // report battery level every 10 minutes
  //battery.setReportIntervalMinutes(10);
  // set an offset to -1 to a thermistor sensor
  //thermistor.setOffset(-1);
  // change the id of a the first child of a sht21 sensor
  //sht21.children.get(1)->setChildId(5);
  // report only when the analog value is above 40%
  //analog.children.get(1)->setMinThreshold(40);
  // power all the nodes through dedicated pins
  //nodeManager.setPowerManager(power);

  // call NodeManager before routine
  nodeManager.before();
}

// presentation
void presentation() {
  // call NodeManager presentation routine
  nodeManager.presentation();
}

// setup
void setup() {
  // call NodeManager setup routine
  nodeManager.setup();
}

// loop
void loop() {
  // call NodeManager loop routine
  nodeManager.loop();
}

#if NODEMANAGER_RECEIVE == ON
// receive
void receive(const MyMessage &message) {
  // call NodeManager receive routine
  nodeManager.receive(message);
}
#endif

#if NODEMANAGER_TIME == ON
// receiveTime
void receiveTime(unsigned long ts) {
  // call NodeManager receiveTime routine
  nodeManager.receiveTime(ts);
}
#endif

Now what's wrong, what's missing?

Help is highly appreciated! Thanks

Martin

maddinthebrain

@maddinthebrain

Best posts made by maddinthebrain

Latest posts made by maddinthebrain