jeremushka,
Thanks.
I updated the project description and added arduino sources. The pins I1 and A are used for power supply, and I2 for the datas.
![](/assets/uploads/profile/9096-profileavatar.jpeg)
Fumée Bleue
@Fumée Bleue
Best posts made by Fumée Bleue
-
RE: 💬 MySensors Linky
Latest posts made by Fumée Bleue
-
Seeeduino Xiao nRF52840
I would like use a XIAO nRF52 (https://wiki.seeedstudio.com/XIAO_BLE/) board but i can't upload the code. I use "MySensors nRF5 board", the compilation is ok but i've an error during upload. I tried also "Seeed nRF5 board" but i've this error : #error "Unsupported platform."
is it a bad idea to use this type of component ? you may advise me to use the Ebyte N73.. -
only sleep NRF24L01
Hello,
Is-it possible to sleep the NRF24L01 module without sleep the arduino by the sleep(xxx) function ?
In my case, i would like limited the consumption of my circuit but i need to use the arduino in order to read the serial interface.Regards.
Tristan -
RE: Infinite loop
@Yveaux, I tried with an laboratoy power supply with the RMF95w and NRF24L01, and the same code.
Test with RMF95w :
- laboratery power supply : OK
- 130mW power supply : KO
Test with NRF24L01+ :
- laboratery power supply : OK
- 130mW power supply : OK
The consumption is the same in the two tests : 38mA max, 10mA mean, 4mA min.
In fact I would like to understand why the arduino restarts, is there a watchdog in the Mysensors library to monitor the supply voltage?PS : I also tried with a larger capacitor without success.
-
RE: Infinite loop
@Yveaux. good idea, yes the power supply is a bit special. It's une AC power 6v limited at 130mW. I used a Graetz rectifier and LDO 3,3v regulator. In fact, i have a similar project with NRF24L01 without issue. I think rfm95w consumes more energy than nrf241L01.
For you, what is the best way to solve my problem ? Perhaps a super capacitor ? -
Infinite loop
Hello,
I implemented a node with Arduino pro mini 3.3v with a RFM95w module. I used Mysensors PASSIVE node exemple.My problem is i have an infinite loop/reboot in my serial log. Do you have an idea why i'm having this issue ?
__ __ ____ | \/ |_ _/ ___| ___ _ __ ___ ___ _ __ ___ | |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __| | | | | |_| |___| | __/ | | \__ \ _ | | \__ \ |_| |_|\__, |____/ \___|_| |_|___/\___/|_| |___/ |___/ 2.3.2 16 MCO:BGN:INIT NODE,CP=RLNPA---,FQ=8,REL=255,VER=2.3.2 28 TSM:INIT 28 TSF:WUR:MS=0 30 RFM95:INIT 32 RFM95:INIT:PIN,CS=10,IQP=2,IQN=0 47 RFM95:PTX:LEVEL=13 49 TSM:INIT:TSP OK 51 TSM:INIT:TSP PSM 53 TSM:INIT:STATID=100 55 TSF:SID:OK,ID=100 57 TSM:FPAR 59 TSM:FPAR:STATP=255 61 TSM:ID 61 TSM:ID:OK 63 TSM:UPL:DISABLED 65 TSM:READY:ID=100,PAR=255,DIS=1 69 RFM95:SWR:SEND,TO=255,SEQ=0,RETRY=0 __ __ ____ | \/ |_ _/ ___| ___ _ __ ___ ___ _ __ ___ | |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __| | | | | |_| |___| | __/ | | \__ \ _ | | \__ \ |_| |_|\__, |____/ \___|_| |_|___/\___/|_| |___/ |___/ 2.3.2 16 MCO:BGN:INIT NODE,CP=RLNPA---,FQ=8,REL=255,VER=2.3.2 28 TSM:INIT 28 TSF:WUR:MS=0 30 RFM95:INIT 32 RFM95:INIT:PIN,CS=10,IQP=2,IQN=0 47 RFM95:PTX:LEVEL=13 49 TSM:INIT:TSP OK 51 TSM:INIT:TSP PSM 53 TSM:INIT:STATID=100 55 TSF:SID:OK,ID=100 57 TSM:FPAR 59 TSM:FPAR:STATP=255 61 TSM:ID 61 TSM:ID:OK 63 TSM:UPL:DISABLED 65 TSM:READY:ID=100,PAR=255,DIS=1 69 RFM95:SWR:SEND,TO=255,SEQ=0,RETRY=0 __ __ ____ | \/ |_ _/ ___| ___ _ __ ___ ___ _ __ ___ | |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __| | | | | |_| |___| | __/ | | \__ \ _ | | \__ \ |_| |_|\__, |____/ \___|_| |_|___/\___/|_| |___/ |___/ 2.3.2 16 MCO:BGN:INIT NODE,CP=RLNPA---,FQ=8,REL=255,VER=2.3.2 28 TSM:INIT 28 TSF:WUR:MS=0 30 RFM95:INIT 32 RFM95:INIT:PIN,CS=10,IQP=2,IQN=0 47 RFM95:PTX:LEVEL=13 49 TSM:INIT:TSP OK 51 TSM:INIT:TSP PSM 53 TSM:INIT:STATID=100 55 TSF:SID:OK,ID=100 57 TSM:FPAR 59 TSM:FPAR:STATP=255 61 TSM:ID 61 TSM:ID:OK 63 TSM:UPL:DISABLED 65 TSM:READY:ID=100,PAR=255,DIS=1 69 RFM95:SWR:SEND,TO=255,SEQ=0,RETRY=0
/* * The MySensors Arduino library handles the wireless radio link and protocol * between your home built sensors/actuators and HA controller of choice. * The sensors forms a self healing radio network with optional repeaters. Each * repeater and gateway builds a routing tables in EEPROM which keeps track of the * network topology allowing messages to be routed to nodes. * * Created by Henrik Ekblad <henrik.ekblad@mysensors.org> * Copyright (C) 2013-2019 Sensnology AB * Full contributor list: https://github.com/mysensors/MySensors/graphs/contributors * * Documentation: http://www.mysensors.org * Support Forum: http://forum.mysensors.org * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * ******************************* * * REVISION HISTORY * Version 1.0 - tekka * * DESCRIPTION * Passive node example: This is a passive & independent reporting node * */ // Enable debug prints #define MY_DEBUG // Enable passive mode #define MY_PASSIVE_NODE // Passive mode requires static node ID #define MY_NODE_ID 100 // Enable and select radio type attached //#define MY_RADIO_RF24 //#define MY_RADIO_NRF5_ESB //#define MY_RADIO_RFM69 #define MY_RADIO_RFM95 #define MY_DEBUG_VERBOSE_RFM95 #define MY_RFM95_FREQUENCY (RFM95_868MHZ) #include <MySensors.h> #define CHILD_ID 0 // Id of the sensor child // Initialize general message MyMessage msg(CHILD_ID, V_TEMP); void setup() { } void presentation() { // Send the sketch version information to the gateway and controller sendSketchInfo("Passive node", "1.0"); // Register all sensors to gw (they will be created as child devices) present(CHILD_ID, S_TEMP); } void loop() { // generate some random data send(msg.set(25.0+random(0,30)/10.0,2)); sleep(2000); }
-
RE: Gateway and dynamic wifi configuration
Thanks for your explanation and links
-
Gateway and dynamic wifi configuration
Hello,
I'm looking for an implementation of gateway based with esp8266 with a possibility to change SSID/password by web page and not static configuration as mysensors examples.
What is your solution ?I'm trying wifimanager library but i have some difficulties about MY_WIFI_SSID and MY_WIFI_PASSWORD used by Mysensors but not wifimanager. Is it possible to use wifimanager with mysensors ?
Tristan
-
RE: 💬 MySensors Linky
I created an 1.0.4 version without warning compilation. I removed "i" and "len" unnecessary variables.