Navigation

    • Register
    • Login
    • OpenHardware.io
    • Categories
    • Recent
    • Tags
    • Popular
    1. Home
    2. dany17
    • Profile
    • Following
    • Followers
    • Topics
    • Posts
    • Best
    • Groups

    dany17

    @dany17

    0
    Reputation
    4
    Posts
    75
    Profile views
    0
    Followers
    0
    Following
    Joined Last Online

    dany17 Follow

    Best posts made by dany17

    This user hasn't posted anything yet.

    Latest posts made by dany17

    • RE: Mysensor usb gateway serial problem

      @kimot
      yes I know this is an error but I wanted to read the value from pin 4. this example worked for me (RelayActuator) I wanted to use this ordinary switch to control the rest of the program. that's all I need at the moment

      posted in Development
      dany17
      dany17
    • RE: Mysensor usb gateway serial problem

      I would like to use this program in mysensors with a switch from domoticz

      #include <Stepper.h>
      #define STEPS 32 
      Stepper stepper (STEPS, 8, 10, 9, 11); 
      int val = 0;
      
      void setup () { 
        Serial.begin (9600);
       stepper.setSpeed (800); 
        pinMode(4, INPUT_PULLUP); 
      
      }
      
      void loop () {
        if (digitalRead (4) == LOW) 
        { 
          val = 20480; 
          stepper.step (val); 
          Serial.println (val); 
        }
        
       if (digitalRead (4) == HIGH) 
        {
          val = -20480; 
          stepper.step (val); 
          Serial.println (val); 
      }
      }
      
      posted in Development
      dany17
      dany17
    • RE: Mysensor usb gateway serial problem

      @scalz said in Mysensor usb gateway serial problem:

      If it doesn't help, like mfalkvidd said please show us your debug logs.

      OK i do //#define MY_RADIO_RF24 because for now I wanted to make a base station via usb

      I will tell you my idea and you will tell if it is possible here because I am slowly losing faith XD
      I want to use mega2560 to control several devices. One of them is the roller blind that I converted into electric motor control (currently I have two. The first classic 2 wires and I have connected to 3 contactors which control the direction and time of operation. The second stepper motor).
      I now want to use my sensor to control the blind in domoticz with 1 switch or if it could be slider.

      The next thing would be INA219 but maybe later for the time being on this roller blind, is it possible to do?

      posted in Development
      dany17
      dany17
    • Mysensor usb gateway serial problem

      Hello, could somebody help me and say why it doesn't work?

      // Enable debug prints to serial monitor
      #define MY_DEBUG
      
      
      // Enable and select radio type attached
      //#define MY_RADIO_RF24
      //#define MY_RADIO_NRF5_ESB
      //#define MY_RADIO_RFM69
      //#define MY_RADIO_RFM95
      
      // Set LOW transmit power level as default, if you have an amplified NRF-module and
      // power your radio separately with a good regulator you can turn up PA level.
      #define MY_RF24_PA_LEVEL RF24_PA_LOW
      
      // Enable serial gateway
      #define MY_GATEWAY_SERIAL
      
      // Define a lower baud rate for Arduinos running on 8 MHz (Arduino Pro Mini 3.3V & SenseBender)
      #if F_CPU == 8000000L
      #define MY_BAUD_RATE 38400
      #endif
      
      // Enable inclusion mode
      #define MY_INCLUSION_MODE_FEATURE
      // Enable Inclusion mode button on gateway
      //#define MY_INCLUSION_BUTTON_FEATURE
      
      // Inverses behavior of inclusion button (if using external pullup)
      //#define MY_INCLUSION_BUTTON_EXTERNAL_PULLUP
      
      // Set inclusion mode duration (in seconds)
      #define MY_INCLUSION_MODE_DURATION 60
      // Digital pin used for inclusion mode button
      //#define MY_INCLUSION_MODE_BUTTON_PIN  3
      
      // Set blinking period
      #define MY_DEFAULT_LED_BLINK_PERIOD 300
      
      // Inverses the behavior of leds
      //#define MY_WITH_LEDS_BLINKING_INVERSE
      
      // Flash leds on rx/tx/err
      // Uncomment to override default HW configurations
      //#define MY_DEFAULT_ERR_LED_PIN 4  // Error led pin
      //#define MY_DEFAULT_RX_LED_PIN  6  // Receive led pin
      //#define MY_DEFAULT_TX_LED_PIN  5  // the PCB, on board LED
      
      #include <MySensors.h>
      
      #define CHILD_ID 3
      #define BUTTON_PIN  3 
      
      #define RELAY_PIN 4  // Arduino Digital I/O pin number for first relay (second on pin+1 etc)
      #define NUMBER_OF_RELAYS 1 // Total number of attached relays
      #define RELAY_ON 1  // GPIO value to write to turn on attached relay
      #define RELAY_OFF 0 // GPIO value to write to turn off attached relay
      
      
      void before()
      {
        for (int sensor=1, pin=RELAY_PIN; sensor<=NUMBER_OF_RELAYS; sensor++, pin++) {
          // Then set relay pins in output mode
          pinMode(pin, OUTPUT);
          // Set relay to last known state (using eeprom storage)
          digitalWrite(pin, loadState(sensor)?RELAY_ON:RELAY_OFF);
        }
      }
      
      int gate = 23;   
      int relay1 =  22; 
      
      
      void setup()
      {
        Serial.begin (115200);
          pinMode(BUTTON_PIN,INPUT);
          digitalWrite(BUTTON_PIN,HIGH);
        
          pinMode(relay1, OUTPUT);
          digitalWrite (relay1, LOW);
          pinMode(gate, OUTPUT);
          digitalWrite (gate, LOW);
          pinMode(24, INPUT_PULLUP);
      }
      
      void presentation()
      {
        // Send the sketch version information to the gateway and Controller
        sendSketchInfo("Relay", "1.0");
      
        for (int sensor=1, pin=RELAY_PIN; sensor<=NUMBER_OF_RELAYS; sensor++, pin++) {
          // Register all sensors to gw (they will be created as child devices)
          present(sensor, S_BINARY);
        }
      }
      
      
      void loop()
      {
         byte value = analogRead(0);
       if (value == LOW){
        delay(10); 
        digitalWrite(gate, LOW);
       digitalWrite(relay1, LOW);
       delay(2000); 
       digitalWrite(gate, HIGH);
        } 
        
        if (value == HIGH){
        delay(10);
        digitalWrite(gate, LOW);
       digitalWrite(relay1, HIGH);
        delay(2000); 
        digitalWrite(gate, HIGH);
      
        }
      
      }
      
      void receive(const MyMessage &message)
      {
        // We only expect one type of message from controller. But we better check anyway.
        if (message.type==V_STATUS) {
          // Change relay state
          digitalWrite(message.sensor-1+RELAY_PIN, message.getBool()?RELAY_ON:RELAY_OFF);
          // Store state in eeprom
          saveState(message.sensor, message.getBool());
          // Write some debug info
          Serial.print("Incoming change for sensor:");
          Serial.print(message.sensor);
          Serial.print(", New status: ");
          Serial.println(message.getBool());
        }
      }
      
      posted in Development
      dany17
      dany17