openHAB 2.0 binding

bpair

I followed your directions and installed on a Windows 7 machine with a serial gateway. Everything came up fine. I configured the serial gateway (added the port). Then I waited but my humidity sensor was not detected. I restarted my arduino with the humidity sensor and immediately two new devices appeared (Humidity plus temperature).

Really nice! Thanks.

TimO

@bpair Thanks for your feedback. I'm glad it works.

I'm currently adding some sensors and plan to test them against @barduino s mocksensor.

barduino

@TimO

oh let me update the code then. :blush:

Did some fixes since my last commit

Cheers

UPDATE

Guys, folks here at MySensor were gracefull enough to upgrade the MockMySensors to lib 1.5 and I didn't realise that. So making a dumb mistake I've tried to update the development branch from my local copy.
I don't think the pull request went through which is good and I think you should be fine with the master version.

Cheers

Atomfire

I am new to MySensors and for that matter home automation in general, but I have setup OpenHab 2.0 on Windows 7 with a serial gateway device. I built a humidity and temp sensor and after a bit of trial and error (30 mins) the sensors were detected within OpenHab. Sensors are updating every 30 seconds without any issues even though the gateway is in the loft and the sensor is in the downstairs living room. I am very impressed at how easy your auto detection has made the initial setup. I have initially bought Vera Edge but my serial gateway has the wrong chipset to work with it so thought I would give this a try. I am tempted to sell the Vera now after having quick success thanks to your help, just need to keep an eye on the OpenHab 2.0 development and hope it's ready to use sometime soon.

TimO

@Atomfire I'm glad it worked for you too!! :-)

I've added a few additional sensors:

S_DOOR
S_MOTION
S_SMOKE
S_DIMMER
S_COVER (V_STOP not implemented in OH2, can't use it yet)
S_WIND
S_RAIN
S_UV
S_WEIGHT
S_DISTANCE
S_LIGHT_LEVEL

Downloadlink is in the first post and I've modified the instructions.

Please delete the content of the userdata directory if you already tested with an older version of the binding. OH2 may get confused (throws exceptions) otherwise.

Cliff Karlsson

after installing openhab2 this way how do I keep it updated?

bpair

This is probably a better question for the openHAB2 google group but is there anyway to persist the data without having to create a items.xml? Or another way to put it, is there any way to persist data for a sensor that is detected and added?

gregl

For those interested in OpenHAB - they have a new forum here:
http://community.openhab.org/

I think/hope it will be easier to use that the google groups.

MartinP

@gregl the link doesn't work, here is the correct one:
https://community.openhab.org/
(only that annoying little s after http i think ;) )

Qu3Uk

Firstly great work on the binding... it makes openhab2 a bit more attractive.

Not entirely sure how to debug this further as I'm very new to openhab but after setting all my sensors up (even via discovery which is cool) after I restart the openhab2 service the MYS things never get initialized and stay in the UNINITIALIZED state.

Running on RP2 and start_debug.sh I see the incoming MYS messages but OH2 is not updating the thing, for example

2015-08-15 04:04:57 [DEBUG] [b.m.p.ip.MySensorsIpConnection:68 ] - 4;0;1;0;0;29.0
2015-08-15 04:05:08 [DEBUG] [b.m.p.ip.MySensorsIpConnection:68 ] - 1;0;1;0;0;30.0

However if I go in to the thing via the paperui, edit/save it. The thing is then initialized and I can see in the console OH2 updating the thing when a message is received.

2015-08-15 04:08:53 [DEBUG] [b.m.p.ip.MySensorsIpConnection:68 ] - 1;0;1;0;0;30.0
2015-08-15 04:08:53 [INFO ] [runtime.busevents :27 ] - mysensors_temperature_08797005_Temperature_1_0_temp state updated to 30.0

I deleted the userdata directory before updating to the latest version 3 days ago.

No idea if this is a OH2 issue or a binding issue though.

TimO

@Qu3Uk: Thank you for the report. I am able to reproduce this. I suppose it is an error in my binding because some parts are started correctly. I will look into it.

Qu3Uk

@TimO Good to know its not just me, may still be O2 it is alpha after all.

Now to figure out these rules..

fets

Hi @TimO, any chance you add support to MySensors MQTT to your great work in progress ?

Cliff Karlsson

How do I add this button from the paper UI ? I can´t understand what to enter in the child id, node id fields.

/**
* The MySensors Arduino library handles the wireless radio link and protocol
* between your home built sensors/actuators and HA controller of choice.
* The sensors forms a self healing radio network with optional repeaters. Each
* repeater and gateway builds a routing tables in EEPROM which keeps track of the
* network topology allowing messages to be routed to nodes.
*
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
* Copyright (C) 2013-2015 Sensnology AB
* Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
*
* Documentation: http://www.mysensors.org
* Support Forum: http://forum.mysensors.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*******************************
*
* DESCRIPTION
*
* Simple binary switch example 
* Connect button or door/window reed switch between 
* digitial I/O pin 3 (BUTTON_PIN below) and GND.
* http://www.mysensors.org/build/binary
*/


#include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>

#define CHILD_ID 3
#define BUTTON_PIN  3  // Arduino Digital I/O pin for button/reed switch

MySensor gw;
Bounce debouncer = Bounce(); 
int oldValue=-1;

// Change to V_LIGHT if you use S_LIGHT in presentation below
MyMessage msg(CHILD_ID,V_TRIPPED);

void setup()  
{  
gw.begin();

// Setup the button
pinMode(BUTTON_PIN,INPUT);
// Activate internal pull-up
digitalWrite(BUTTON_PIN,HIGH);

// After setting up the button, setup debouncer
debouncer.attach(BUTTON_PIN);
debouncer.interval(5);

// Register binary input sensor to gw (they will be created as child devices)
// You can use S_DOOR, S_MOTION or S_LIGHT here depending on your usage. 
// If S_LIGHT is used, remember to update variable type you send in. See "msg" above.
gw.present(CHILD_ID, S_DOOR);  
}


//  Check if digital input has changed and send in new value
void loop() 
{
debouncer.update();
// Get the update value
int value = debouncer.read();

if (value != oldValue) {
   // Send in the new value
   gw.send(msg.set(value==HIGH ? 1 : 0));
   oldValue = value;
}
}

TimO

@Cliff-Karlsson : Start the discovery process in the paper ui and after that restart your sensor. The sensor will represent itself while starting up and should appear in the paper ui.

TimO

@fets: I'm not very familiar with MQTT but that should already work with the 1.X binding, or not?

fets

@TimO yes I think it works with manual bindins (several discussions mention it) but I meant using paper ui as you do here :)

Cliff Karlsson

Well if I add a door sensor and just enter some random node id/child Id it shows up as online. I never managed to add any sensor automatically even if I start the search process and resetting any sensors.

But the problem is that I can't get any reaction from the switch. I have tried connecting a button to pin 3 and also tried just connecting a cable from pin 3 to gnd. But no reaction whatever I do.

TimO

@Qu3Uk : Fixed the error. The sensors were initialized before the bridge was up.

@Cliff-Karlsson: The status of a thing in OH is not reliable and I'm yet not sure how to make it reliable because the connection between sensor and gateway is stateless, so a sensor maybe is online even if it only transmits one time per day.

In your case: what is the output of the "start_debug.sh"? Are there messages from the MySensors Gateway logged?

ZoTyA

Nice work!

Did anyone try the binding with FakeMySensors?

http://forum.mysensors.org/topic/1648/test-your-home-made-controller-with-fakemysensors

openHAB 2.0 binding

15

11.7k

11.2k

113.0k