Gateway hardware
Hardware
2
Posts
2
Posters
799
Views
2
Watching
-
I am ready to go from my prototype breadboard gateway to more of a finished product. Was wondering if anyone has any recommendations on which arduino/rf/nic modules are best for a more permanent installation?
I have seen some 3dprinted enclosures and will probably go that route for my case, but am wondering if anyone has recommendations for the hardware.
-
@Jason-Brunk I would recommend going for something newer like this:
https://github.com/hallard/WeMos-RFM69
there is a lora version if you want to be too innovative:
(currently not working with MySensors)https://github.com/hallard/WeMos-Lora
The GWs above are very small - you can choose a custom enclosure easily.
PS My recommendation would be RFM69 rather than NRF24
