NRF24L01+PA+LNA with Raspberry PI 3
I have a NRF24L01+PA+LNA that I connected to a Raspberry PI 3 using the 3.3V output pin of the Raspberry PI 3, PIN 17 and it seems to work, but I have some questions about this
- Would be better powering the NRF24L01+PA+LNA from a 5V pin on the PI with a 3.3V regulator, does the 5V pins output more mAs?
- Rather connect the NRF24L01+PA+LNA to the PI supply power adaptor directly with a 3.3V regulator?
- Does the NRF24L01+PA+LNA need a decoupling capacitor as well?
@esawyja My opinion, radio directly from psu and 3.3v regulator and yes, decouple the radio with capacitor.
Thanks, let me try that
@esawyja Perhaps you should be inspired by this :
Wow, yes I am, thanks a lot!!