Navigation

    • Register
    • Login
    • OpenHardware.io
    • Categories
    • Recent
    • Tags
    • Popular
    1. Home
    2. jpbabou
    • Profile
    • Following
    • Followers
    • Topics
    • Posts
    • Best
    • Groups

    jpbabou

    @jpbabou

    1
    Reputation
    8
    Posts
    546
    Profile views
    0
    Followers
    1
    Following
    Joined Last Online
    Email jpbabou@gmail.com

    jpbabou Follow

    Best posts made by jpbabou

    • RE: Step-by-step procedure to connect the NRF24L01+ to the GPIO pins and use the Raspberry as a Serial Gateway (MySensors 1.x)

      @Tore-André-Rosander
      Tks a lot
      It works's fine!!
      pi@JpPi2 ~ $ ssh JpPi3
      _ ____ _ _____
      | |_ __ | _ ()__ /
      _ | | '_ | |) | | |
      | || | |) | /| |) |
      _
      /| ._/|| ||___/
      |
      |

      Welcome to Raspbian GNU/Linux 8.0 (jessie) (4.4.7-v7+).

      System information as of: Wed Jun 1 09:10:09 CEST 2016

      System load: 0.01 IP Address:
      Memory usage: 17.9% System uptime: 1 day
      Usage on /: 27% Swap usage: 0.0%
      Local Users: 1 Processes: 126

      Last login: Wed Jun 1 09:03:53 2016 from raspberryjp

      posted in Hardware
      jpbabou
      jpbabou

    Latest posts made by jpbabou

    • RE: How to change PA _LOW to PA_MAX

      @mfalkvidd My problem is the following:
      i have 2 sensors DS1820D with promini
      Same sketch (except nodeid)
      One is OK: far from 1-2 meter from the Pigateway
      The other one (t° of my swimming pool) if far from max 10 m.. :works a few times (every 15 minutes).. then stop sendind

      I become crazy: i changed the power from battery to a 9v connected to a 3,3 V convertor connected on raw ..

      Thks for any idee ?
      Where do i have to change the code to have a PA_MAX for the PiGateway when i test with
      /usr/local/sbin/PiGatewaySerial

      Starting PiGatewaySerial...
      Protocol version - 1.4
      Created PTY '/dev/pts/0'
      Gateway tty: /dev/ttyMySensorsGateway
      ================ SPI Configuration ================
      CSN Pin = CE0 (PI Hardware Driven)
      CE Pin = Custom GPIO25
      Clock Speed = 8 Mhz
      ================ NRF Configuration ================
      STATUS = 0x0e RX_DR=0 TX_DS=0 MAX_RT=0 RX_P_NO=7 TX_FULL=0
      RX_ADDR_P0-1 = 0xa8a8e1fc00 0xa8a8e1fc00
      RX_ADDR_P2-5 = 0xff 0xc4 0xc5 0xc6
      TX_ADDR = 0xe7e7e7e7e7
      RX_PW_P0-6 = 0x20 0x20 0x20 0x00 0x00 0x00
      EN_AA = 0x3b
      EN_RXADDR = 0x06
      RF_CH = 0x4c
      RF_SETUP = 0x23
      CONFIG = 0x0e
      DYNPD/FEATURE = 0x3f 0x06
      Data Rate = 250KBPS
      Model = nRF24L01+
      CRC Length = 16 bits
      PA Power = PA_LOW

      posted in General Discussion
      jpbabou
      jpbabou
    • How to change PA _LOW to PA_MAX

      I met problems with sensors and nrf2l01.
      How can i change the PA_LEVEL from PA_LOW to PA_MAX
      Here is the start of the gateway
      ================ SPI Configuration ================
      CSN Pin = CE0 (PI Hardware Driven)
      CE Pin = Custom GPIO25
      Clock Speed = 8 Mhz
      ================ NRF Configuration ================
      STATUS = 0x0e RX_DR=0 TX_DS=0 MAX_RT=0 RX_P_NO=7 TX_FULL=0
      RX_ADDR_P0-1 = 0xa8a8e1fc00 0xa8a8e1fc00
      RX_ADDR_P2-5 = 0xff 0xc4 0xc5 0xc6
      TX_ADDR = 0xa8a8e1fc0a
      RX_PW_P0-6 = 0x20 0x20 0x20 0x00 0x00 0x00
      EN_AA = 0x3b
      EN_RXADDR = 0x06
      RF_CH = 0x4c
      RF_SETUP = 0x23
      CONFIG = 0x0e
      DYNPD/FEATURE = 0x3f 0x06
      Data Rate = 250KBPS
      Model = nRF24L01+
      CRC Length = 16 bits
      PA Power = PA_LOW

      Tks for your help

      posted in General Discussion
      jpbabou
      jpbabou
    • RE: Step-by-step procedure to connect the NRF24L01+ to the GPIO pins and use the Raspberry as a Serial Gateway (MySensors 1.x)

      @Tore-André-Rosander
      Tks a lot
      It works's fine!!
      pi@JpPi2 ~ $ ssh JpPi3
      _ ____ _ _____
      | |_ __ | _ ()__ /
      _ | | '_ | |) | | |
      | || | |) | /| |) |
      _
      /| ._/|| ||___/
      |
      |

      Welcome to Raspbian GNU/Linux 8.0 (jessie) (4.4.7-v7+).

      System information as of: Wed Jun 1 09:10:09 CEST 2016

      System load: 0.01 IP Address:
      Memory usage: 17.9% System uptime: 1 day
      Usage on /: 27% Swap usage: 0.0%
      Local Users: 1 Processes: 126

      Last login: Wed Jun 1 09:03:53 2016 from raspberryjp

      posted in Hardware
      jpbabou
      jpbabou
    • RE: Step-by-step procedure to connect the NRF24L01+ to the GPIO pins and use the Raspberry as a Serial Gateway (MySensors 1.x)

      @Tore-André-Rosander
      Tks a lot for your answer.. It seems to look like what i want at logon..Iwill test it.
      I keep you in touch!

      posted in Hardware
      jpbabou
      jpbabou
    • RE: Step-by-step procedure to connect the NRF24L01+ to the GPIO pins and use the Raspberry as a Serial Gateway (MySensors 1.x)

      @Sander-Stolk hi
      how do you achieve to have a nice 'logon' screen ou your PI: Domotics Logo, @ip,memory,date... etc etc..
      Im' newbee on raspberry from france
      HAve a nice day
      JP
      i really want to have the same or any available sample like yours


      | _ \ | | ()
      | | | |
      __ _ __ ___ ___ | |_ _ ___ ____
      | | | / _ | '_ ` _ \ / _ | | |/ | /
      | |/ / () | | | | | | () | |_| | (
      / /
      |
      / _/|| || ||___/ _||_/|

      Last login: Mon Apr 11 12:10:24 2016 from 192.168.1.34

      Monday, 11 April 2016, 12:12:45 pm CEST
      Linux 4.1.18-v7+ armv7l GNU/Linux
      Uptime.............: 0 days, 00h00m25s
      Memory.............: 770952kB (Free) / 948056kB (Total)
      Load Averages......: 0.59, 0.16, 0.05 (1, 5, 15 min)
      Running Processes..: 100
      IP Addresses.......: 192.168.1.14

      posted in Hardware
      jpbabou
      jpbabou
    • RE: No communication between Sensor and Gateway

      Hi
      Like you, i'have got a lot a problem to connect nano pro mini with a serial gateway on a raspeberry
      Everything is fine on with a Arduino Uno.i think there are problems with the 3,3 V pover on tte nano pro mini
      I keep on investigating..
      TRy to connect with UNO with gateway sketch and one UNO with sensor sketch.. and everyting wikk be ok..
      As you i'm newbee

      posted in Troubleshooting
      jpbabou
      jpbabou
    • RE: Step-by-step procedure to connect the NRF24L01+ to the GPIO pins and use the Raspberry as a Serial Gateway (MySensors 1.x)

      Hi
      something is missing..

      Is there a problem with the repository
      Tks a lot for your job!

      pi@domoticjp ~ $ sudo git clone https://github.com/mysensors/Raspberry.git
      Cloning into 'Raspberry'...
      remote: Counting objects: 273, done.
      remote: Compressing objects: 100% (3/3), done.
      remote: Total 273 (delta 0), reused 0 (delta 0), pack-reused 270
      Receiving objects: 100% (273/273), 215.00 KiB | 0 bytes/s, done.
      Resolving deltas: 100% (114/114), done.
      Checking connectivity... done.
      pi@domoticjp ~ $ cd Raspberry/librf24-bcm
      -bash: cd: Raspberry/librf24-bcm: No such file or directory
      posted in Hardware
      jpbabou
      jpbabou
    • RE: [Tutorial] Raspberry Pi NRF24l01 direct connection

      @jelluz
      I have got he sme configuration between Arduiono et a PIGATEWAYSERIAL ?
      How do you declare it into a controler like Pimatic (you says that it works fine)
      Tkd for your advice

      posted in Controllers
      jpbabou
      jpbabou