Ok lol find an link just putting up for others http://docs.openhab.org/configuration/sitemaps.html

So far openhab looks really easy and a good layout. Thanks to TimO and other thanks....

Hi I looking to do My 1st MySensors Project an hoping to use this one I have a 3.2" Nextion. Will it be hard to use a nextion as a Display. Will there be help so I can get it working as I think the nextion Display will be good .... with weather updates and maybe senses to tell if the plants has to much water or no water. but thats down the trake...

Guys if you look I been on here for about a year so yes I been reading alot before I started to build. An been look at YouTube video about code and all this.
I have given up on this one for now and I got an pre build one from a another site he have an set by set with networks and so on. I be back later. After I get openhab and MQTT worked out. As I going to be using esp8266 and the MQTT.

Ok lol find an link just putting up for others http://docs.openhab.org/configuration/sitemaps.html

So far openhab looks really easy and a good layout. Thanks to TimO and other thanks....

I stuck on making the site map. So far I been doing it all on my local 8080. How do I make the site map???

all good COM4 and its working

@tombstone i thin its some thing to do with "**If OH2 is not running with root privileges for example if you installed via apt please ensure that you are allowed to access the serial port. **" but can not see how to do this in openhub2??

@tombstone ok so I have just went and download and setup up openhab2 and also download the binding lol its not hard at all...

I go into paper UI and in things I add my gateway

my gatway is offline have I missed someing I am up 2 this setup...

Configuring things

Assuming you have configured a bridge, the next step is to configure things. We use the place holder in the bridge configuration and fill it with content:

conf/things/demo.things:

I know I may be asking stupid question but have Google openHAB2 binding and I get that veraion 1 can be used version 2.

But what I like to know what is it and do you need it for your mysensors to work.

I had thought that it is like an addon for my senses to work. Like v-var1 an so on to work

I just new and working out all the things to know.

If there an link how to get mysensors to work on openhub can some one give me the link

@dbemowsk

Yes it's has limited functionality. Looks like openhub, Home Assistant, MyController.org and my nodes works find.

It be good to know if it's been fixed on Domoticz.
Will have to find out but if not I have to change to one of the above.
Which one do you recommend
Thanks

@dbemowsk
I happy to change from domoticz.
As I just starting out. What one you use now?

Re: [Error sending switch command](check device/hardware !)

Hi I getting the same error msg (Error sending switch command](check device/hardware !)). I got my 1st serial Gateway started last night and just built a irrigation controller made from bulldog. Irrigation control

I have promini for the serial Gateway and a pro mini for the irrigation controller.

I get 2 nodis on domoticz one as my sprinkler and the other as unknown.

I get 5 children as lights
One mysensor 2.2. on the my sprinkler

One unknowing
On the unknowing

The error comes up when turning on or off.

Sorry if this is a easy fix but I'm just learning.

Thanks