Posts made by tombstone

Guys if you look I been on here for about a year so yes I been reading alot before I started to build. An been look at YouTube video about code and all this.
I have given up on this one for now and I got an pre build one from a another site he have an set by set with networks and so on. I be back later. After I get openhab and MQTT worked out. As I going to be using esp8266 and the MQTT.

Ok lol find an link just putting up for others http://docs.openhab.org/configuration/sitemaps.html

So far openhab looks really easy and a good layout. Thanks to TimO and other thanks....

I stuck on making the site map. So far I been doing it all on my local 8080. How do I make the site map???

all good COM4 and its working

@tombstone i thin its some thing to do with "**If OH2 is not running with root privileges for example if you installed via apt please ensure that you are allowed to access the serial port. **" but can not see how to do this in openhub2??

@tombstone ok so I have just went and download and setup up openhab2 and also download the binding lol its not hard at all...

I go into paper UI and in things I add my gateway

my gatway is offline have I missed someing I am up 2 this setup...

Configuring things

Assuming you have configured a bridge, the next step is to configure things. We use the place holder in the bridge configuration and fill it with content:

conf/things/demo.things:

I know I may be asking stupid question but have Google openHAB2 binding and I get that veraion 1 can be used version 2.

But what I like to know what is it and do you need it for your mysensors to work.

I had thought that it is like an addon for my senses to work. Like v-var1 an so on to work

I just new and working out all the things to know.

If there an link how to get mysensors to work on openhub can some one give me the link

@dbemowsk

Yes it's has limited functionality. Looks like openhub, Home Assistant, MyController.org and my nodes works find.

It be good to know if it's been fixed on Domoticz.
Will have to find out but if not I have to change to one of the above.
Which one do you recommend
Thanks

@dbemowsk
I happy to change from domoticz.
As I just starting out. What one you use now?

Re: [Error sending switch command](check device/hardware !)

Hi I getting the same error msg (Error sending switch command](check device/hardware !)). I got my 1st serial Gateway started last night and just built a irrigation controller made from bulldog. Irrigation control

I have promini for the serial Gateway and a pro mini for the irrigation controller.

I get 2 nodis on domoticz one as my sprinkler and the other as unknown.

I get 5 children as lights
One mysensor 2.2. on the my sprinkler

One unknowing
On the unknowing

The error comes up when turning on or off.

Sorry if this is a easy fix but I'm just learning.

Thanks

Thanks guys now I understand, felling stupid but it was like a mind blank as was thinking it worked another way.

Can some one point me to the a link (error sending switch command check device/hardware) this comes up when turning on lights on the irrigation controller.

I find this but it didn't makes sense. https://forum.mysensors.org/topic/2553/error-sending-switch-command-check-device-hardware

@Grubstake still may have a pont if there's been overs. Not saying we right or your right. But learning is a difficult thing. So is teaching. That's good that we have lots of open source site and when we get stuck members step ins and give a hand.

@Grubstake
I was think of writing a post or making a video (like Pete) for the beginner's. Just an add-on of his work. Not saying his video are not good just saying I like to make more.... Aftrr I know how everything works. Not off on a good start but I get there.

I feel so stupid thought the first video that Pete made serial gateway was just the wiring your your radio up for the irrigation.

@tbowmo
can you tell me if I got this wrong

The "brain" is my pro min
"The radio" is nRF24
the brain (promiin) get and sends info to the (Radio)
the controller (my PC that is running Domoticz)" gets and send info to the radio.
That's how I get it after reading

@tbowmo
Do the debug log. Look normal.. don't know how to read.

0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.1
3 TSM:INIT
4 TSF:WUR:MS=0
11 TSM:INIT:TSP OK
13 TSM:FPAR
15 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
2022 !TSM:FPAR:NO REPLY
2024 TSM:FPAR
2026 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
4034 !TSM:FPAR:NO REPLY
4036 TSM:FPAR
4038 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
6046 !TSM:FPAR:NO REPLY
6048 TSM:FPAR
6050 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
8058 !TSM:FPAR:FAIL
8059 TSM:FAIL:CNT=1
8061 TSM:FAIL:PDT
18065 TSM:FAIL:RE-INIT
18067 TSM:INIT
18074 TSM:INIT:TSP OK
18076 TSM:FPAR
18078 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
20086 !TSM:FPAR:NO REPLY
20088 TSM:FPAR
20090 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
22099 !TSM:FPAR:NO REPLY
22102 TSM:FPAR
22104 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
24112 !TSM:FPAR:NO REPLY
24114 TSM:FPAR
24116 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
26124 !TSM:FPAR:FAIL
26125 TSM:FAIL:CNT=2
26127 TSM:FAIL:PDT
36130 TSM:FAIL:RE-INIT
36132 TSM:INIT
36140 TSM:INIT:TSP OK
36142 TSM:FPAR
36144 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
38152 !TSM:FPAR:NO REPLY
38154 TSM:FPAR
38156 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
40164 !TSM:FPAR:NO REPLY
40166 TSM:FPAR
40168 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
42176 !TSM:FPAR:NO REPLY
42178 TSM:FPAR
42180 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
44188 !TSM:FPAR:FAIL
44189 TSM:FAIL:CNT=3
44191 TSM:FAIL:PDT
54194 TSM:FAIL:RE-INIT
54196 TSM:INIT
54203 TSM:INIT:TSP OK
54205 TSM:FPAR
54207 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
56215 !TSM:FPAR:NO REPLY
56217 TSM:FPAR
56219 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
58227 !TSM:FPAR:NO REPLY
58229 TSM:FPAR
58231 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
60239 !TSM:FPAR:NO REPLY
60241 TSM:FPAR
60243 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
62252 !TSM:FPAR:FAIL
62254 TSM:FAIL:CNT=4
62255 TSM:FAIL:PDT
72258 TSM:FAIL:RE-INIT
72260 TSM:INIT
72267 TSM:INIT:TSP OK
72269 TSM:FPAR
72271 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
74280 !TSM:FPAR:NO REPLY
74283 TSM:FPAR
74285 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
76293 !TSM:FPAR:NO REPLY
76295 TSM:FPAR
76297 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
78305 !TSM:FPAR:NO REPLY
78307 TSM:FPAR
78309 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
80317 !TSM:FPAR:FAIL
80318 TSM:FAIL:CNT=5
80320 TSM:FAIL:PDT
90323 TSM:FAIL:RE-INIT
90326 TSM:INIT
90333 TSM:INIT:TSP OK
90335 TSM:FPAR
90337 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
92345 !TSM:FPAR:NO REPLY
92347 TSM:FPAR
92349 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
94357 !TSM:FPAR:NO REPLY
94359 TSM:FPAR
94361 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
96369 !TSM:FPAR:NO REPLY
96371 TSM:FPAR
96373 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
98381 !TSM:FPAR:FAIL
98383 TSM:FAIL:CNT=6
98384 TSM:FAIL:PDT
108387 TSM:FAIL:RE-INIT
108389 TSM:INIT
108396 TSM:INIT:TSP OK
108398 TSM:FPAR
108401 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
110408 !TSM:FPAR:NO REPLY
110410 TSM:FPAR
110413 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
112420 !TSM:FPAR:NO REPLY
112422 TSM:FPAR
112425 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
114433 !TSM:FPAR:NO REPLY
114435 TSM:FPAR
114438 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
116445 !TSM:FPAR:FAIL
116447 TSM:FAIL:CNT=7
116449 TSM:FAIL:PDT

there alot of failing

@tbowmo
I habe one pro mini with NRF24 and, connected to my computer. I have done everything from the video up too 22mins were I got stuck.

0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.1
3 TSM:INIT
4 TSF:WUR:MS=0
11 TSM:INIT:TSP OK
13 TSM:FPAR
15 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
2022 !TSM:FPAR:NO REPLY
2024 TSM:FPAR
2026 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
4034 !TSM:FPAR:NO REPLY
4036 TSM:FPAR
4038 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
6046 !TSM:FPAR:NO REPLY
6048 TSM:FPAR
6050 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
8058 !TSM:FPAR:FAIL
8059 TSM:FAIL:CNT=1
8061 TSM:FAIL:PDT
18065 TSM:FAIL:RE-INIT
18067 TSM:INIT
18074 TSM:INIT:TSP OK
18076 TSM:FPAR
18078 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
20086 !TSM:FPAR:NO REPLY
20088 TSM:FPAR
20090 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
22099 !TSM:FPAR:NO REPLY
22102 TSM:FPAR
22104 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
24112 !TSM:FPAR:NO REPLY
24114 TSM:FPAR
24116 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
26124 !TSM:FPAR:FAIL
26125 TSM:FAIL:CNT=2
26127 TSM:FAIL:PDT
36130 TSM:FAIL:RE-INIT
36132 TSM:INIT
36140 TSM:INIT:TSP OK
36142 TSM:FPAR
36144 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
38152 !TSM:FPAR:NO REPLY
38154 TSM:FPAR
38156 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
40164 !TSM:FPAR:NO REPLY
40166 TSM:FPAR
40168 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
42176 !TSM:FPAR:NO REPLY
42178 TSM:FPAR
42180 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
44188 !TSM:FPAR:FAIL
44189 TSM:FAIL:CNT=3
44191 TSM:FAIL:PDT
54194 TSM:FAIL:RE-INIT
54196 TSM:INIT
54203 TSM:INIT:TSP OK
54205 TSM:FPAR
54207 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
56215 !TSM:FPAR:NO REPLY
56217 TSM:FPAR
56219 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
58227 !TSM:FPAR:NO REPLY
58229 TSM:FPAR
58231 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
60239 !TSM:FPAR:NO REPLY
60241 TSM:FPAR
60243 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
62252 !TSM:FPAR:FAIL
62254 TSM:FAIL:CNT=4
62255 TSM:FAIL:PDT
72258 TSM:FAIL:RE-INIT
72260 TSM:INIT
72267 TSM:INIT:TSP OK
72269 TSM:FPAR
72271 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
74280 !TSM:FPAR:NO REPLY
74283 TSM:FPAR
74285 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
76293 !TSM:FPAR:NO REPLY
76295 TSM:FPAR
76297 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
78305 !TSM:FPAR:NO REPLY
78307 TSM:FPAR
78309 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
80317 !TSM:FPAR:FAIL
80318 TSM:FAIL:CNT=5
80320 TSM:FAIL:PDT
90323 TSM:FAIL:RE-INIT
90326 TSM:INIT
90333 TSM:INIT:TSP OK
90335 TSM:FPAR
90337 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
92345 !TSM:FPAR:NO REPLY
92347 TSM:FPAR
92349 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
94357 !TSM:FPAR:NO REPLY
94359 TSM:FPAR
94361 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
96369 !TSM:FPAR:NO REPLY
96371 TSM:FPAR
96373 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
98381 !TSM:FPAR:FAIL
98383 TSM:FAIL:CNT=6
98384 TSM:FAIL:PDT
108387 TSM:FAIL:RE-INIT
108389 TSM:INIT
108396 TSM:INIT:TSP OK
108398 TSM:FPAR
108401 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
110408 !TSM:FPAR:NO REPLY
110410 TSM:FPAR
110413 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
112420 !TSM:FPAR:NO REPLY
112422 TSM:FPAR
112425 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
114433 !TSM:FPAR:NO REPLY
114435 TSM:FPAR
114438 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
116445 !TSM:FPAR:FAIL
116447 TSM:FAIL:CNT=7
116449 TSM:FAIL:PDT

This is my debug log. will like to know if there some thing I missed as I learning thanks

@tombstone

//#define MY_NODE_ID 1  // Set this to fix your Radio ID or use Auto

IS there someing I have missed with adding NODES???

@tbowmo
I have it runing both ways but with serial gateway there no errors but when going to setup there is no NODES.

2017-07-30 19:20:55.764 TCP: Connection problem (Unable to connect to specified IP/Port)
2017-07-30 19:20:55.766 TCP: Reconnecting in 30 seconds...
2017-07-30 19:21:26.035 TCP: Reconnecting...
2017-07-30 19:21:37.093 MySensors: TCP/IP Worker stopped...
2017-07-30 19:27:03.150 MySensors: Using serial port: COM4

@tbowmo
The hardware I'am using for the gateway is the Arduino pro mini and its wireless from the NRF24L01+ 2.4GHz Wireless Transceiver

I don't know if it is getting IP address from my router.

have not use telnet before (I have just youtube it and enabled it... all what i got from youtube was that you can send email lol cool)

Does the gateway send any logs to the serial port? If yes, then post them on the forum. (were do I get them logs the ones from Domoticz and below but not much info to go on)

Thanks

another nice video

ok so when adding to Domoticz..
I go to hardware...
I name is..... test...
then choose.. MySensors Gateway with LAN interface....
Data Timeout: .... Disabled.....
Remote Address.... (I have tryed)....

IP Address, Subnet Mask, Default Gateway, Primary DNS, Secondary DNS.

(i try everythinbg I can think of and still not work)

Port: ... 5003
My pro min has the red light on and blink blue occassionally.

what I get from the Domoticz log is

2017-07-30 18:00:00.627 Error: MySensors: Can not connect to: 61.9.211.33:5003
2017-07-30 18:00:00.627 TCP: Connection problem (Unable to connect to specified IP/Port)
2017-07-30 18:00:00.627 TCP: Reconnecting in 30 seconds...
'''

nice bet it didn't come to 150eu to make

@Black-Cat thanks

can't I use my PC as a gateway for now???

really looking good

I will like to know more too.

Domoticz LOOKS GOOD
BUT new to all this

ok I almost there but my pro mini has just Analog 1 to 3. I say I have to change the coda were abouts...
I also have not setup up my Vera Controller as I see you have to pay...

Is there another one that is eazy as I have try some but can not get it to work. eg HomeGenie is download and on my pc but don't think its not to good. don't know how to find my pro mini. happy to chagaen to someing eazer to get me started thanks guys....

Its my 1st project and I have learnt alot but have got myself a snag and I am getting this....

Arduino: 1.8.3 (Windows 10), Board: "Arduino Pro or Pro Mini, ATmega328 (5V, 16 MHz)"

C:\Users\HTPC\Documents\Arduino\Irrigation_Controller_1\Irrigation_Controller_1..ino:82:21: fatal error: TimeLib.h: No such file or directory

#include <TimeLib.h>

                 ^

compilation terminated.

exit status 1
Error compiling for board Arduino Pro or Pro Mini.

It's really hard to work out what's good post over bad post. Lol

Ok I read it all. Just want to start with the basic then change to pH reader soil reader water reader rain detector.

Hi I just order all the parts that was listed. Do I need to read the 230 post or it's ok just watched the video.

Hi I looking to do My 1st MySensors Project an hoping to use this one I have a 3.2" Nextion. Will it be hard to use a nextion as a Display. Will there be help so I can get it working as I think the nextion Display will be good .... with weather updates and maybe senses to tell if the plants has to much water or no water. but thats down the trake...