Navigation

    • Register
    • Login
    • OpenHardware.io
    • Categories
    • Recent
    • Tags
    • Popular
    1. Home
    2. Daemon D
    • Profile
    • Following
    • Followers
    • Topics
    • Posts
    • Best
    • Groups

    Daemon D

    @Daemon D

    2
    Reputation
    14
    Posts
    639
    Profile views
    0
    Followers
    0
    Following
    Joined Last Online

    Daemon D Follow

    Best posts made by Daemon D

    • RE: [Solved] Function repeater not working

      @tekka said:

      @Daemon-D Can you explain how you solved the issue - I'm sure other user could also profit if they face a similar problem. Thanks.

      The problem was solved by moving to the top of the sketch exactly like the to test the sketch before #include

      // Enable debug prints to serial monitor
      #define MY_DEBUG 
      
      // Enable and select radio type attached
      #define MY_RADIO_NRF24
      //#define MY_RADIO_RFM69
      
      // Enabled repeater feature for this node
      #define MY_REPEATER_FEATURE
      
      #include <SPI.h>
      #include <MySensors.h>
      
      posted in Troubleshooting
      Daemon D
      Daemon D

    Latest posts made by Daemon D

    • RE: Function repeater not working 2

      How can I get a log with GW if Serial?

      posted in Troubleshooting
      Daemon D
      Daemon D
    • Function repeater not working 2

      Topics Continued
      https://forum.mysensors.org/topic/4526/solved-function-repeater-not-working
      Again not work, writes NACK:1

      MCO:BGN:INIT REPEATER,CP=RNNRA--,VER=2.0.1-beta
      TSM:INIT
      TSM:INIT:TSP OK
      TSF:ASID:OK,ID=3
      TSM:FPAR
      TSF:MSG:SEND,3-3-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
      TSF:MSG:READ,0-0-3,s=255,c=3,t=8,pt=1,l=1,sg=0:0
      TSF:MSG:FPAR RES,ID=0,D=0
      TSF:MSG:FPAR OK,ID=0,D=1
      TSM:FPAR:OK
      TSM:ID
      TSM:ID:OK,ID=3
      TSM:UPL
      TSF:PING:SEND,TO=0
      TSF:MSG:SEND,3-3-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1
      TSF:MSG:READ,0-0-3,s=255,c=3,t=25,pt=1,l=1,sg=0:1
      TSF:MSG:PONG RECV,HP=1
      TSF:CHKUPL:OK
      TSM:UPL:OK
      TSM:READY
      TSF:MSG:SEND,3-3-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=OK:0100
      !TSF:MSG:SEND,3-3-0-0,s=255,c=0,t=18,pt=0,l=10,sg=0,ft=0,st=NACK:2.0.1-beta
      TSF:MSG:SEND,3-3-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=1,st=OK:0
      TSF:MSG:READ,0-0-3,s=255,c=3,t=6,pt=0,l=1,sg=0:M
      TSF:MSG:SEND,3-3-0-0,s=255,c=3,t=11,pt=0,l=12,sg=0,ft=0,st=OK:Alarm Sensor
      TSF:MSG:SEND,3-3-0-0,s=255,c=3,t=12,pt=0,l=3,sg=0,ft=0,st=OK:1.0
      TSF:MSG:SEND,3-3-0-0,s=1,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=OK:
      TSF:MSG:SEND,3-3-0-0,s=2,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=OK:
      TSF:MSG:SEND,3-3-0-0,s=3,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=OK:
      TSF:MSG:SEND,3-3-0-0,s=4,c=0,t=3,pt=0,l=0,sg=0,ft=0,st=OK:
      TSF:MSG:SEND,3-3-0-0,s=5,c=0,t=3,pt=0,l=0,sg=0,ft=0,st=OK:
      MCO:REG:REQ
      TSF:MSG:SEND,3-3-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=OK:2
      TSF:MSG:READ,0-0-3,s=255,c=3,t=27,pt=1,l=1,sg=0:1
      MCO:PIM:NODE REG=1
      MCO:BGN:STP
      MCO:BGN:INIT OK,ID=3,PAR=0,DIS=1,REG=1
      TSF:MSG:READ,5-5-0,s=1,c=1,t=0,pt=7,l=5,sg=0:20.3
      TSF:MSG:REL MSG
      TSF:MSG:SEND,5-3-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:20.3
      TSF:MSG:READ,6-6-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
      TSF:MSG:BC
      TSF:MSG:FPAR REQ,ID=6
      TSF:CHKUPL:OK,FCTRL
      TSF:MSG:GWL OK
      !TSF:MSG:SEND,3-3-6-6,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:1
      TSF:MSG:SEND,3-3-0-0,s=2,c=1,t=16,pt=0,l=1,sg=0,ft=0,st=OK:0
      TSF:MSG:SEND,3-3-0-0,s=2,c=1,t=16,pt=0,l=1,sg=0,ft=0,st=OK:0
      TSF:MSG:READ,5-5-0,s=3,c=1,t=16,pt=2,l=2,sg=0:0
      TSF:MSG:REL MSG
      TSF:MSG:SEND,5-3-0-0,s=3,c=1,t=16,pt=2,l=2,sg=0,ft=0,st=OK:0
      TSF:MSG:READ,5-5-0,s=3,c=1,t=16,pt=2,l=2,sg=0:0
      TSF:MSG:REL MSG
      TSF:MSG:SEND,5-3-0-0,s=3,c=1,t=16,pt=2,l=2,sg=0,ft=0,st=OK:0
      TSF:MSG:READ,0-0-5,s=3,c=1,t=16,pt=2,l=2,sg=0:0
      TSF:MSG:REL MSG
      TSF:MSG:SEND,0-3-5-5,s=3,c=1,t=16,pt=2,l=2,sg=0,ft=0,st=OK:0
      TSF:MSG:READ,0-0-5,s=3,c=1,t=16,pt=2,l=2,sg=0:0
      TSF:MSG:REL MSG
      TSF:MSG:SEND,0-3-5-5,s=3,c=1,t=16,pt=2,l=2,sg=0,ft=0,st=OK:0
      TSF:MSG:READ,6-6-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
      TSF:MSG:BC
      TSF:MSG:FPAR REQ,ID=6
      TSF:PING:SEND,TO=0
      TSF:MSG:SEND,3-3-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1
      TSF:MSG:READ,0-0-3,s=255,c=3,t=25,pt=1,l=1,sg=0:1
      TSF:MSG:PONG RECV,HP=1
      TSF:CHKUPL:OK
      TSF:MSG:GWL OK
      !TSF:MSG:SEND,3-3-6-6,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:1
      TSF:MSG:READ,6-6-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
      TSF:MSG:BC
      TSF:MSG:FPAR REQ,ID=6
      

      Node 6 not working

      !TSF:MSG:SEND,3-3-6-6,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:1
      
      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: [Solved] Function repeater not working

      @tekka said:

      @Daemon-D Can you explain how you solved the issue - I'm sure other user could also profit if they face a similar problem. Thanks.

      The problem was solved by moving to the top of the sketch exactly like the to test the sketch before #include

      // Enable debug prints to serial monitor
      #define MY_DEBUG 
      
      // Enable and select radio type attached
      #define MY_RADIO_NRF24
      //#define MY_RADIO_RFM69
      
      // Enabled repeater feature for this node
      #define MY_REPEATER_FEATURE
      
      #include <SPI.h>
      #include <MySensors.h>
      
      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: [Solved] Function repeater not working

      @tekka

      @tekka said:

      @Daemon-D I'm not sure you got my question regarding the issue you have with your repeater node. I suggest you try the RepeaterNode sketch from the MySensors examples and post the debug log here.

      The problem was solved by a code transfer at the very beginning as a test sketch before #include

      // Enable debug prints to serial monitor
      #define MY_DEBUG 
      
      // Enable and select radio type attached
      #define MY_RADIO_NRF24
      //#define MY_RADIO_RFM69
      
      // Enabled repeater feature for this node
      #define MY_REPEATER_FEATURE```
      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: [Solved] Function repeater not working

      @sincze said:

      @Daemon-D okay for you still not working right??
      Repeater not working 😞

      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: [Solved] Function repeater not working

      @sincze said:

      @tekka interesting. I assume people are already using repeaters in 2.0.x so it will be safe for me to. Migrate from 1.5.4 to 2.0.0??

      Yes, Migrate from 1.5.4 to 2.0.0

      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: [Solved] Function repeater not working

      @tekka

      Используем библиотеку MySensors версии 2.0.1-beta из папки: C:\Users\Daemon\Google Drive\Project\libraries\MySensors 
      

      Already I tried the beta of the development, all the same.

      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: [Solved] Function repeater not working

      @tekka

      #include "CyberLib.h" //Библиотека от Cyber-Place.ru
      #include <SPI.h>
      #include <Bounce2.h>
      // Enable and select radio type attached
      #define MY_RADIO_NRF24
      // Enable debug prints to serial monitor
      #define MY_DEBUG 
      // Enable repeater functionality for this node
      #define MY_REPEATER_FEATURE
      
      #define ConsoleComm 0
      #define TIME_READ_INPUT_SEPIC_SIGN 1000 //время снятия показаний с входов
      #define TIME_SEND_VERA_SEPTIC 66000 //время для отправки данных септика
      #define TIME_SEND_VERA_SIGN 11000 //время для отправки данных сигнализации
      #define TIME_SEND_VERA_220 53100 //время для отправки данных 220
      #define RELAY_SIGN  6  // pin relay сигнализации
      #define DIGITAL_INPUT_SEPTIC 7   // The digital input D7 септик
      #define DIGITAL_INPUT_SIGN 8   // The digital input D8 сигнализация
      #define INTERRUPT_220V 3   // пин датчика наличия 220
      #define CHILD_VERA_SEPTIC 1   // Id Vera вирутального сенсора ошибки септика
      #define CHILD_VERA_SIGN 2   // Id  Vera вирутального сенсора срабатывания сигнализации 
      #define CHILD_VERA_220 3 // ID Vera вирутального сенсора наличия 220
      #define CHILD_VERA_RELAY_SIGN 4 // Id Vera реле сигнализации 
      #define CHILD_VERA_ROLLING 5 // Id Vera  рольставни
      #define RELAY_ON 1  // GPIO value to write to turn on attached relay
      #define RELAY_OFF 0 // GPIO value to write to turn off attached relay
      
      //MySensor gw; // MySensor
      Bounce debouncerInputSeptic = Bounce();
      Bounce debouncerInputSign = Bounce();
      
      MyMessage errorMsgSeptic(CHILD_VERA_SEPTIC, V_TRIPPED); // виртуальный сенсор ошибки септика
      MyMessage errorMsgSign(CHILD_VERA_SIGN, V_TRIPPED); // виртуальный сенсор сигнализации
      MyMessage errorMsg220(CHILD_VERA_220, V_TRIPPED); // виртуальный сенсор 220
      
      int powerlostint; // храним нарастающим итогом переходы 0 по 220
      bool powerlost, valueSeptic, valueSign;
      unsigned long currentTime;
      unsigned long loopTimeRead, loopTimeSeptic, loopTimeSign, loopTime220;
      Metro timer_read = Metro(TIME_READ_INPUT_SEPIC_SIGN); // храним время опросов датчиков входов
      Metro time_send_septic = Metro(TIME_SEND_VERA_SEPTIC); // храним время отправки данных на Vera о септике
      Metro time_send_sign = Metro(TIME_SEND_VERA_SIGN); // храним время отправки данных на Vera о сигнализации
      Metro time_send_220 = Metro(TIME_SEND_VERA_220); // храним время отправки данных на Vera о 220
      
      void presentation()  {
      
       // Initialize library and add callback for incoming messages
        //  gw.begin(incomingMessage, AUTO, true); //repeater node
      
          // Send the sketch version information to the gateway and Controller
          sendSketchInfo("Alarm Sensor", "1.0");
          present(CHILD_VERA_SEPTIC, S_MOTION); //alarm D7
          present(CHILD_VERA_SIGN, S_MOTION); //alarm D8
          present(CHILD_VERA_220, S_MOTION); //alarm 220
          // Register all sensors to gw (they will be created as child devices)
          present(CHILD_VERA_RELAY_SIGN, S_LIGHT); //relay D6
          present(CHILD_VERA_ROLLING, S_LIGHT); // вирутальное реле для рольставень
      
      }
      
      //********************обработчики прерываний*******************************
      void  detect_up() { // обработка внешнего прерывания. Сработает по переднему фронту
      
          powerlostint++; // если 50 раз в секунду получаем прерывание, увеличиваем powerlostint
      }
      
      
      //****************************SETUP*********************************************
      
      
      void setup() {
      
          UART_Init(115200);//инициализация последовательного порта
      #if ConsoleComm
          Serial << "Setup: " <<  endl;
      #endif
      
        
          // Then set relay pins in output mode
          pinMode(RELAY_SIGN, OUTPUT);
          // Set relay to last known state (using eeprom storage)
          D4_Out; //Настраиваем пин D4 на выход для управления рольставнями
          pinMode(DIGITAL_INPUT_SEPTIC, INPUT);  // определяем DIGITAL_INPUT_SEPTIC как вход
          digitalWrite(DIGITAL_INPUT_SEPTIC, HIGH);     // подключить подтягивающий резистор
          pinMode(DIGITAL_INPUT_SIGN, INPUT);  // определяем IGITAL_INPUT_SENSOR_D7 как вход
          digitalWrite(DIGITAL_INPUT_SIGN, HIGH);     // подключить подтягивающий резистор
      
          // After setting up the button, setup debouncer
          debouncerInputSeptic.attach(DIGITAL_INPUT_SEPTIC);
          debouncerInputSeptic.interval(5);
          debouncerInputSign.attach(DIGITAL_INPUT_SIGN);
          debouncerInputSign.interval(5);
      
      }
      
      //**************************** LOOP ********************************************************
      
      void loop() {
      
         // gw.process(); // By calling process() you route messages in the background
          debouncerInputSeptic.update();  // обновляем статус боунсера септика
          debouncerInputSign.update(); // обновляем статус боунсера сигнализации
      
          if (timer_read.check() == 1) ReadD(); // через TIME_READ_INPUT_SEPIC_SIGN запускаем ReadD()
          if (time_send_septic.check() == 1) SendVeraSeptic(); // через TIME_SEND_VERA_SEPTIC запускаем SendVeraSeptic()
          if (time_send_sign.check() == 1) SendVeraSign(); // через TIME_SEND_VERA_SIGN запускаем SendVeraSign()
          if (time_send_220.check() == 1) SendVera220(); // через TIME_SEND_VERA_220 запускаем SendVera220()
      
      
      }
      
      //************************ END LOOP **********************************************************
      
      //************************** ReadD() *********************************************************
      
      // считываем данные со входов
      
      void ReadD() {
      
          // Get the update value
          valueSeptic = debouncerInputSeptic.read();
      
          // Get the update value
          valueSign = debouncerInputSign.read();
      
          //valueSign = digitalRead(DIGITAL_INPUT_SIGN);
      #if ConsoleComm
          Serial << "valueSign: " << valueSign << endl;
          Serial << "valueSeptic: " << valueSeptic << endl;
          Serial << "powerlost: " << powerlost << endl;
      #endif
      
      }
      
      //******************************** END ReadD() ****************************************************
      
      //********************************* SendVeraSeptic() ***********************************************
      
      // отсылаем данные на Vera о септике
      void SendVeraSeptic() {
      #if ConsoleComm
          Serial << "SendVeraSeptic(): " << valueSeptic << endl;
      #endif
          send(errorMsgSeptic.set(valueSeptic ? "1" : "0")); // Send tripped value to gw
      
      }
      
      //********************************* END SendVeraSeptic() ***********************************************
      
      //********************************* SendVeraSign() ***********************************************
      
      // отсылаем данные на Vera о сигнализации
      void SendVeraSign() {
      #if ConsoleComm
          Serial << "SendVeraSign(): " << valueSign << endl;
      #endif
          send(errorMsgSign.set(valueSign ? "1" : "0")); // Send tripped value to gw
      
      }
      
      //********************************* END SendVeraSign() ***********************************************
      
      //********************************* SendVera220() ***********************************************
      
      // отсылаем данные на Vera о 220
      void SendVera220() {
      
      #if ConsoleComm
          Serial << "220: " << powerlostint << endl;
      #endif
          attachInterrupt(digitalPinToInterrupt(INTERRUPT_220V),detect_up, LOW); // включаем прерывание чтобы наловить фронты 220
          delay(2); // нужен, т.к. бывает не успевает собрать данные
          if (powerlostint > 0) powerlost = false; // если получили кучу прерываний, значит 220 есть
          else powerlost=true;	// если нет прерываний, нет и 220
          detachInterrupt(digitalPinToInterrupt(INTERRUPT_220V)); //временно выключаем прерывание
          send(errorMsg220.set(powerlost ? "1" : "0")); // Send tripped value to gw
          powerlostint=0; // обнуляем счётчик прерываний
      }
      
      //********************************* END SendVera220() ***********************************************
      
      //********************************** incomingMessage ************************************************
      
      void receive(const MyMessage &message) {
          // We only expect one type of message from controller. But we better check anyway.
          if (message.type == V_LIGHT) {
              // Change relay state
              if (message.sensor == CHILD_VERA_RELAY_SIGN) { // если пришло для сигнализации
                  digitalWrite(RELAY_SIGN, message.getBool() ? RELAY_ON : RELAY_OFF);
                  // Store state in eeprom
                  // gw.saveState(message.sensor, message.getBool());
              }
              if (message.sensor == CHILD_VERA_ROLLING) { // если пришло для рольставень
                  detachInterrupt(digitalPinToInterrupt(INTERRUPT_220V)); //временно выключаем прерывание
                  if (message.getBool() == true) { // если пришла 1 то закрываем
                      for (int i = 0; i < 5; i++) {
                          closers();
                      }
                  } else if (message.getBool() == false)
                      for (int i = 0; i < 5; i++) { // если пришёл 0 то открываем
                          for (int i = 0; i < 5; i++) {
                              openrs();
                          }
      
                      }
                  //  attachInterrupt(digitalPinToInterrupt(INTERRUPT_220V), detect_up, LOW);  // настроить срабатывание прерывания interrupt1 на pin 2 на низкий уровень
              }
              // Write some debug info
      #if ConsoleComm
              Serial.print("Incoming change for sensor:");
              Serial.print(message.sensor);
              Serial.print(", New status: ");
              Serial.println(message.getBool());
      #endif
          }
      }
      
      //************************************* END incomingMessage ******************************************
      
      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: [Solved] Function repeater not working

      @Daemon-D said:

      // Enable repeater functionality for this node
      #define MY_REPEATER_FEATURE
      

      that is enough to enable the repeater?

      posted in Troubleshooting
      Daemon D
      Daemon D
    • [Solved] Function repeater not working

      Help, function repeater not working
      Vera lite fw 1.7.830
      GW Arduino nano serial - MySensors Arduino Library v2.0.0 master
      node/repeater Arduino nano MySensors Arduino Library v2.0.0 master

      code node/repeater ID=3

      // Enable and select radio type attached
      #define MY_RADIO_NRF24
      // Enable debug prints to serial monitor
      #define MY_DEBUG 
      // Enable repeater functionality for this node
      #define MY_REPEATER_FEATURE
      

      node ID = 4 and ID = 6 long distance and worked perfectly through the library 1.5.4 and repeater ID = 3

      After the transition to version 2, these two nodes fallen off

      Starting sensor (RNNNA-, 2.0.0)
      TSM:INIT
      TSM:RADIO:OK
      TSP:ASSIGNID:OK (ID=3)
      TSM:FPAR
      TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
      TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
      TSP:MSG:BC
      TSP:MSG:READ 0-0-3 s=255,c=3,t=8,pt=1,l=1,sg=0:0
      TSP:MSG:FPAR RES (ID=0, dist=0)
      TSP:MSG:PAR OK (ID=0, dist=1)
      TSM:FPAR:OK
      TSM:ID
      TSM:CHKID:OK (ID=3)
      TSM:UPL
      TSP:PING:SEND (dest=0)
      TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=ok:1
      TSP:MSG:READ 0-0-3 s=255,c=3,t=25,pt=1,l=1,sg=0:1
      TSP:MSG:PONG RECV (hops=1)
      TSP:CHKUPL:OK
      TSM:UPL:OK
      TSM:READY
      Setup: 
      !TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=fail:0100
      TSP:MSG:SEND 3-3-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,ft=1,st=ok:2.0.0
      TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=ok:0
      TSP:MSG:READ 0-0-3 s=255,c=3,t=6,pt=0,l=1,sg=0:M
      TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=11,pt=0,l=12,sg=0,ft=0,st=ok:Alarm Sensor
      TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,ft=0,st=ok:1.0
      TSP:MSG:SEND 3-3-0-0 s=1,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=ok:
      TSP:MSG:SEND 3-3-0-0 s=2,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=ok:
      TSP:MSG:SEND 3-3-0-0 s=3,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=ok:
      TSP:MSG:SEND 3-3-0-0 s=4,c=0,t=3,pt=0,l=0,sg=0,ft=0,st=ok:
      TSP:MSG:SEND 3-3-0-0 s=5,c=0,t=3,pt=0,l=0,sg=0,ft=0,st=ok:
      Request registration...
      TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=ok:2
      TSP:MSG:READ 0-0-3 s=255,c=3,t=27,pt=1,l=1,sg=0:1
      Node registration=1
      Init complete, id=3, parent=0, distance=1, registration=1
      TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
      TSP:MSG:BC
      TSP:MSG:READ 6-6-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
      TSP:MSG:BC
      TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
      TSP:MSG:BC
      TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
      TSP:MSG:BC
      TSP:MSG:READ 6-6-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
      TSP:MSG:BC
      TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
      TSP:MSG:BC
      TSP:MSG:SEND 3-3-0-0 s=3,c=1,t=16,pt=0,l=1,sg=0,ft=0,st=ok:0
      
      posted in Troubleshooting
      Daemon D
      Daemon D