Navigation

    • Register
    • Login
    • OpenHardware.io
    • Categories
    • Recent
    • Tags
    • Popular
    1. Home
    2. Daemon D
    3. Posts
    • Profile
    • Following
    • Followers
    • Topics
    • Posts
    • Best
    • Groups

    Posts made by Daemon D

    • RE: Function repeater not working 2

      How can I get a log with GW if Serial?

      posted in Troubleshooting
      Daemon D
      Daemon D
    • Function repeater not working 2

      Topics Continued
      https://forum.mysensors.org/topic/4526/solved-function-repeater-not-working
      Again not work, writes NACK:1

      MCO:BGN:INIT REPEATER,CP=RNNRA--,VER=2.0.1-beta
TSM:INIT
TSM:INIT:TSP OK
TSF:ASID:OK,ID=3
TSM:FPAR
TSF:MSG:SEND,3-3-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSF:MSG:READ,0-0-3,s=255,c=3,t=8,pt=1,l=1,sg=0:0
TSF:MSG:FPAR RES,ID=0,D=0
TSF:MSG:FPAR OK,ID=0,D=1
TSM:FPAR:OK
TSM:ID
TSM:ID:OK,ID=3
TSM:UPL
TSF:PING:SEND,TO=0
TSF:MSG:SEND,3-3-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1
TSF:MSG:READ,0-0-3,s=255,c=3,t=25,pt=1,l=1,sg=0:1
TSF:MSG:PONG RECV,HP=1
TSF:CHKUPL:OK
TSM:UPL:OK
TSM:READY
TSF:MSG:SEND,3-3-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=OK:0100
!TSF:MSG:SEND,3-3-0-0,s=255,c=0,t=18,pt=0,l=10,sg=0,ft=0,st=NACK:2.0.1-beta
TSF:MSG:SEND,3-3-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=1,st=OK:0
TSF:MSG:READ,0-0-3,s=255,c=3,t=6,pt=0,l=1,sg=0:M
TSF:MSG:SEND,3-3-0-0,s=255,c=3,t=11,pt=0,l=12,sg=0,ft=0,st=OK:Alarm Sensor
TSF:MSG:SEND,3-3-0-0,s=255,c=3,t=12,pt=0,l=3,sg=0,ft=0,st=OK:1.0
TSF:MSG:SEND,3-3-0-0,s=1,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=OK:
TSF:MSG:SEND,3-3-0-0,s=2,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=OK:
TSF:MSG:SEND,3-3-0-0,s=3,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=OK:
TSF:MSG:SEND,3-3-0-0,s=4,c=0,t=3,pt=0,l=0,sg=0,ft=0,st=OK:
TSF:MSG:SEND,3-3-0-0,s=5,c=0,t=3,pt=0,l=0,sg=0,ft=0,st=OK:
MCO:REG:REQ
TSF:MSG:SEND,3-3-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=OK:2
TSF:MSG:READ,0-0-3,s=255,c=3,t=27,pt=1,l=1,sg=0:1
MCO:PIM:NODE REG=1
MCO:BGN:STP
MCO:BGN:INIT OK,ID=3,PAR=0,DIS=1,REG=1
TSF:MSG:READ,5-5-0,s=1,c=1,t=0,pt=7,l=5,sg=0:20.3
TSF:MSG:REL MSG
TSF:MSG:SEND,5-3-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:20.3
TSF:MSG:READ,6-6-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
TSF:MSG:FPAR REQ,ID=6
TSF:CHKUPL:OK,FCTRL
TSF:MSG:GWL OK
!TSF:MSG:SEND,3-3-6-6,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:1
TSF:MSG:SEND,3-3-0-0,s=2,c=1,t=16,pt=0,l=1,sg=0,ft=0,st=OK:0
TSF:MSG:SEND,3-3-0-0,s=2,c=1,t=16,pt=0,l=1,sg=0,ft=0,st=OK:0
TSF:MSG:READ,5-5-0,s=3,c=1,t=16,pt=2,l=2,sg=0:0
TSF:MSG:REL MSG
TSF:MSG:SEND,5-3-0-0,s=3,c=1,t=16,pt=2,l=2,sg=0,ft=0,st=OK:0
TSF:MSG:READ,5-5-0,s=3,c=1,t=16,pt=2,l=2,sg=0:0
TSF:MSG:REL MSG
TSF:MSG:SEND,5-3-0-0,s=3,c=1,t=16,pt=2,l=2,sg=0,ft=0,st=OK:0
TSF:MSG:READ,0-0-5,s=3,c=1,t=16,pt=2,l=2,sg=0:0
TSF:MSG:REL MSG
TSF:MSG:SEND,0-3-5-5,s=3,c=1,t=16,pt=2,l=2,sg=0,ft=0,st=OK:0
TSF:MSG:READ,0-0-5,s=3,c=1,t=16,pt=2,l=2,sg=0:0
TSF:MSG:REL MSG
TSF:MSG:SEND,0-3-5-5,s=3,c=1,t=16,pt=2,l=2,sg=0,ft=0,st=OK:0
TSF:MSG:READ,6-6-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
TSF:MSG:FPAR REQ,ID=6
TSF:PING:SEND,TO=0
TSF:MSG:SEND,3-3-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1
TSF:MSG:READ,0-0-3,s=255,c=3,t=25,pt=1,l=1,sg=0:1
TSF:MSG:PONG RECV,HP=1
TSF:CHKUPL:OK
TSF:MSG:GWL OK
!TSF:MSG:SEND,3-3-6-6,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:1
TSF:MSG:READ,6-6-255,s=255,c=3,t=7,pt=0,l=0,sg=0:
TSF:MSG:BC
TSF:MSG:FPAR REQ,ID=6

      Node 6 not working

      !TSF:MSG:SEND,3-3-6-6,s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=NACK:1
      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: [Solved] Function repeater not working

      @tekka said:

      @Daemon-D Can you explain how you solved the issue - I'm sure other user could also profit if they face a similar problem. Thanks.

      The problem was solved by moving to the top of the sketch exactly like the to test the sketch before #include

      // Enable debug prints to serial monitor
#define MY_DEBUG 

// Enable and select radio type attached
#define MY_RADIO_NRF24
//#define MY_RADIO_RFM69

// Enabled repeater feature for this node
#define MY_REPEATER_FEATURE

#include <SPI.h>
#include <MySensors.h>
      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: [Solved] Function repeater not working

      @tekka

      @tekka said:

      @Daemon-D I'm not sure you got my question regarding the issue you have with your repeater node. I suggest you try the RepeaterNode sketch from the MySensors examples and post the debug log here.

      The problem was solved by a code transfer at the very beginning as a test sketch before #include

      // Enable debug prints to serial monitor
#define MY_DEBUG 

// Enable and select radio type attached
#define MY_RADIO_NRF24
//#define MY_RADIO_RFM69

// Enabled repeater feature for this node
#define MY_REPEATER_FEATURE```
      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: [Solved] Function repeater not working

      @sincze said:

      @Daemon-D okay for you still not working right??
      Repeater not working 😞

      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: [Solved] Function repeater not working

      @sincze said:

      @tekka interesting. I assume people are already using repeaters in 2.0.x so it will be safe for me to. Migrate from 1.5.4 to 2.0.0??

      Yes, Migrate from 1.5.4 to 2.0.0

      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: [Solved] Function repeater not working

      @tekka

      Используем библиотеку MySensors версии 2.0.1-beta из папки: C:\Users\Daemon\Google Drive\Project\libraries\MySensors

      Already I tried the beta of the development, all the same.

      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: [Solved] Function repeater not working

      @tekka

      #include "CyberLib.h" //Библиотека от Cyber-Place.ru
#include <SPI.h>
#include <Bounce2.h>
// Enable and select radio type attached
#define MY_RADIO_NRF24
// Enable debug prints to serial monitor
#define MY_DEBUG 
// Enable repeater functionality for this node
#define MY_REPEATER_FEATURE

#define ConsoleComm 0
#define TIME_READ_INPUT_SEPIC_SIGN 1000 //время снятия показаний с входов
#define TIME_SEND_VERA_SEPTIC 66000 //время для отправки данных септика
#define TIME_SEND_VERA_SIGN 11000 //время для отправки данных сигнализации
#define TIME_SEND_VERA_220 53100 //время для отправки данных 220
#define RELAY_SIGN  6  // pin relay сигнализации
#define DIGITAL_INPUT_SEPTIC 7   // The digital input D7 септик
#define DIGITAL_INPUT_SIGN 8   // The digital input D8 сигнализация
#define INTERRUPT_220V 3   // пин датчика наличия 220
#define CHILD_VERA_SEPTIC 1   // Id Vera вирутального сенсора ошибки септика
#define CHILD_VERA_SIGN 2   // Id  Vera вирутального сенсора срабатывания сигнализации 
#define CHILD_VERA_220 3 // ID Vera вирутального сенсора наличия 220
#define CHILD_VERA_RELAY_SIGN 4 // Id Vera реле сигнализации 
#define CHILD_VERA_ROLLING 5 // Id Vera  рольставни
#define RELAY_ON 1  // GPIO value to write to turn on attached relay
#define RELAY_OFF 0 // GPIO value to write to turn off attached relay

//MySensor gw; // MySensor
Bounce debouncerInputSeptic = Bounce();
Bounce debouncerInputSign = Bounce();

MyMessage errorMsgSeptic(CHILD_VERA_SEPTIC, V_TRIPPED); // виртуальный сенсор ошибки септика
MyMessage errorMsgSign(CHILD_VERA_SIGN, V_TRIPPED); // виртуальный сенсор сигнализации
MyMessage errorMsg220(CHILD_VERA_220, V_TRIPPED); // виртуальный сенсор 220

int powerlostint; // храним нарастающим итогом переходы 0 по 220
bool powerlost, valueSeptic, valueSign;
unsigned long currentTime;
unsigned long loopTimeRead, loopTimeSeptic, loopTimeSign, loopTime220;
Metro timer_read = Metro(TIME_READ_INPUT_SEPIC_SIGN); // храним время опросов датчиков входов
Metro time_send_septic = Metro(TIME_SEND_VERA_SEPTIC); // храним время отправки данных на Vera о септике
Metro time_send_sign = Metro(TIME_SEND_VERA_SIGN); // храним время отправки данных на Vera о сигнализации
Metro time_send_220 = Metro(TIME_SEND_VERA_220); // храним время отправки данных на Vera о 220

void presentation()  {

 // Initialize library and add callback for incoming messages
  //  gw.begin(incomingMessage, AUTO, true); //repeater node

    // Send the sketch version information to the gateway and Controller
    sendSketchInfo("Alarm Sensor", "1.0");
    present(CHILD_VERA_SEPTIC, S_MOTION); //alarm D7
    present(CHILD_VERA_SIGN, S_MOTION); //alarm D8
    present(CHILD_VERA_220, S_MOTION); //alarm 220
    // Register all sensors to gw (they will be created as child devices)
    present(CHILD_VERA_RELAY_SIGN, S_LIGHT); //relay D6
    present(CHILD_VERA_ROLLING, S_LIGHT); // вирутальное реле для рольставень

}

//********************обработчики прерываний*******************************
void  detect_up() { // обработка внешнего прерывания. Сработает по переднему фронту

    powerlostint++; // если 50 раз в секунду получаем прерывание, увеличиваем powerlostint
}


//****************************SETUP*********************************************


void setup() {

    UART_Init(115200);//инициализация последовательного порта
#if ConsoleComm
    Serial << "Setup: " <<  endl;
#endif

  
    // Then set relay pins in output mode
    pinMode(RELAY_SIGN, OUTPUT);
    // Set relay to last known state (using eeprom storage)
    D4_Out; //Настраиваем пин D4 на выход для управления рольставнями
    pinMode(DIGITAL_INPUT_SEPTIC, INPUT);  // определяем DIGITAL_INPUT_SEPTIC как вход
    digitalWrite(DIGITAL_INPUT_SEPTIC, HIGH);     // подключить подтягивающий резистор
    pinMode(DIGITAL_INPUT_SIGN, INPUT);  // определяем IGITAL_INPUT_SENSOR_D7 как вход
    digitalWrite(DIGITAL_INPUT_SIGN, HIGH);     // подключить подтягивающий резистор

    // After setting up the button, setup debouncer
    debouncerInputSeptic.attach(DIGITAL_INPUT_SEPTIC);
    debouncerInputSeptic.interval(5);
    debouncerInputSign.attach(DIGITAL_INPUT_SIGN);
    debouncerInputSign.interval(5);

}

//**************************** LOOP ********************************************************

void loop() {

   // gw.process(); // By calling process() you route messages in the background
    debouncerInputSeptic.update();  // обновляем статус боунсера септика
    debouncerInputSign.update(); // обновляем статус боунсера сигнализации

    if (timer_read.check() == 1) ReadD(); // через TIME_READ_INPUT_SEPIC_SIGN запускаем ReadD()
    if (time_send_septic.check() == 1) SendVeraSeptic(); // через TIME_SEND_VERA_SEPTIC запускаем SendVeraSeptic()
    if (time_send_sign.check() == 1) SendVeraSign(); // через TIME_SEND_VERA_SIGN запускаем SendVeraSign()
    if (time_send_220.check() == 1) SendVera220(); // через TIME_SEND_VERA_220 запускаем SendVera220()


}

//************************ END LOOP **********************************************************

//************************** ReadD() *********************************************************

// считываем данные со входов

void ReadD() {

    // Get the update value
    valueSeptic = debouncerInputSeptic.read();

    // Get the update value
    valueSign = debouncerInputSign.read();

    //valueSign = digitalRead(DIGITAL_INPUT_SIGN);
#if ConsoleComm
    Serial << "valueSign: " << valueSign << endl;
    Serial << "valueSeptic: " << valueSeptic << endl;
    Serial << "powerlost: " << powerlost << endl;
#endif

}

//******************************** END ReadD() ****************************************************

//********************************* SendVeraSeptic() ***********************************************

// отсылаем данные на Vera о септике
void SendVeraSeptic() {
#if ConsoleComm
    Serial << "SendVeraSeptic(): " << valueSeptic << endl;
#endif
    send(errorMsgSeptic.set(valueSeptic ? "1" : "0")); // Send tripped value to gw

}

//********************************* END SendVeraSeptic() ***********************************************

//********************************* SendVeraSign() ***********************************************

// отсылаем данные на Vera о сигнализации
void SendVeraSign() {
#if ConsoleComm
    Serial << "SendVeraSign(): " << valueSign << endl;
#endif
    send(errorMsgSign.set(valueSign ? "1" : "0")); // Send tripped value to gw

}

//********************************* END SendVeraSign() ***********************************************

//********************************* SendVera220() ***********************************************

// отсылаем данные на Vera о 220
void SendVera220() {

#if ConsoleComm
    Serial << "220: " << powerlostint << endl;
#endif
    attachInterrupt(digitalPinToInterrupt(INTERRUPT_220V),detect_up, LOW); // включаем прерывание чтобы наловить фронты 220
    delay(2); // нужен, т.к. бывает не успевает собрать данные
    if (powerlostint > 0) powerlost = false; // если получили кучу прерываний, значит 220 есть
    else powerlost=true;	// если нет прерываний, нет и 220
    detachInterrupt(digitalPinToInterrupt(INTERRUPT_220V)); //временно выключаем прерывание
    send(errorMsg220.set(powerlost ? "1" : "0")); // Send tripped value to gw
    powerlostint=0; // обнуляем счётчик прерываний
}

//********************************* END SendVera220() ***********************************************

//********************************** incomingMessage ************************************************

void receive(const MyMessage &message) {
    // We only expect one type of message from controller. But we better check anyway.
    if (message.type == V_LIGHT) {
        // Change relay state
        if (message.sensor == CHILD_VERA_RELAY_SIGN) { // если пришло для сигнализации
            digitalWrite(RELAY_SIGN, message.getBool() ? RELAY_ON : RELAY_OFF);
            // Store state in eeprom
            // gw.saveState(message.sensor, message.getBool());
        }
        if (message.sensor == CHILD_VERA_ROLLING) { // если пришло для рольставень
            detachInterrupt(digitalPinToInterrupt(INTERRUPT_220V)); //временно выключаем прерывание
            if (message.getBool() == true) { // если пришла 1 то закрываем
                for (int i = 0; i < 5; i++) {
                    closers();
                }
            } else if (message.getBool() == false)
                for (int i = 0; i < 5; i++) { // если пришёл 0 то открываем
                    for (int i = 0; i < 5; i++) {
                        openrs();
                    }

                }
            //  attachInterrupt(digitalPinToInterrupt(INTERRUPT_220V), detect_up, LOW);  // настроить срабатывание прерывания interrupt1 на pin 2 на низкий уровень
        }
        // Write some debug info
#if ConsoleComm
        Serial.print("Incoming change for sensor:");
        Serial.print(message.sensor);
        Serial.print(", New status: ");
        Serial.println(message.getBool());
#endif
    }
}

//************************************* END incomingMessage ******************************************
      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: [Solved] Function repeater not working

      @Daemon-D said:

      // Enable repeater functionality for this node
#define MY_REPEATER_FEATURE

      that is enough to enable the repeater?

      posted in Troubleshooting
      Daemon D
      Daemon D
    • [Solved] Function repeater not working

      Help, function repeater not working
      Vera lite fw 1.7.830
      GW Arduino nano serial - MySensors Arduino Library v2.0.0 master
      node/repeater Arduino nano MySensors Arduino Library v2.0.0 master

      code node/repeater ID=3

      // Enable and select radio type attached
#define MY_RADIO_NRF24
// Enable debug prints to serial monitor
#define MY_DEBUG 
// Enable repeater functionality for this node
#define MY_REPEATER_FEATURE

      node ID = 4 and ID = 6 long distance and worked perfectly through the library 1.5.4 and repeater ID = 3

      After the transition to version 2, these two nodes fallen off

      Starting sensor (RNNNA-, 2.0.0)
TSM:INIT
TSM:RADIO:OK
TSP:ASSIGNID:OK (ID=3)
TSM:FPAR
TSP:MSG:SEND 3-3-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 0-0-3 s=255,c=3,t=8,pt=1,l=1,sg=0:0
TSP:MSG:FPAR RES (ID=0, dist=0)
TSP:MSG:PAR OK (ID=0, dist=1)
TSM:FPAR:OK
TSM:ID
TSM:CHKID:OK (ID=3)
TSM:UPL
TSP:PING:SEND (dest=0)
TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=ok:1
TSP:MSG:READ 0-0-3 s=255,c=3,t=25,pt=1,l=1,sg=0:1
TSP:MSG:PONG RECV (hops=1)
TSP:CHKUPL:OK
TSM:UPL:OK
TSM:READY
Setup: 
!TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=fail:0100
TSP:MSG:SEND 3-3-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,ft=1,st=ok:2.0.0
TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=ok:0
TSP:MSG:READ 0-0-3 s=255,c=3,t=6,pt=0,l=1,sg=0:M
TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=11,pt=0,l=12,sg=0,ft=0,st=ok:Alarm Sensor
TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,ft=0,st=ok:1.0
TSP:MSG:SEND 3-3-0-0 s=1,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=ok:
TSP:MSG:SEND 3-3-0-0 s=2,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=ok:
TSP:MSG:SEND 3-3-0-0 s=3,c=0,t=1,pt=0,l=0,sg=0,ft=0,st=ok:
TSP:MSG:SEND 3-3-0-0 s=4,c=0,t=3,pt=0,l=0,sg=0,ft=0,st=ok:
TSP:MSG:SEND 3-3-0-0 s=5,c=0,t=3,pt=0,l=0,sg=0,ft=0,st=ok:
Request registration...
TSP:MSG:SEND 3-3-0-0 s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=ok:2
TSP:MSG:READ 0-0-3 s=255,c=3,t=27,pt=1,l=1,sg=0:1
Node registration=1
Init complete, id=3, parent=0, distance=1, registration=1
TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 6-6-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 6-6-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:READ 4-4-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
TSP:MSG:BC
TSP:MSG:SEND 3-3-0-0 s=3,c=1,t=16,pt=0,l=1,sg=0,ft=0,st=ok:0
      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: req node id again

      @Mouridsen said:

      Do you mean using the "Clear" button for the child nodes in Vera?? I have the same issue.

      Yes

      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: req node id again

      @Daemon-D solved the problem by cleaning the routing table in 3 repeater

      posted in Troubleshooting
      Daemon D
      Daemon D
    • req node id again
      1. IDE 1.6.1
      2. Lib 1.4.1
      3. Vera Lite + usb hub (ext. power D-Link) + Arduino nano serial + NRF24L01 + PA + capacitor
      4. NEW repeater (or node) Arduino nano (New but have never been used) + NRF24L01 + PA + capacitor 47 mf <- trable
      5. Arduino nano + NRF24L01 + PA + capacitor <- repeater altid 3;255
      6. More ardiuno nano nodes, working fine

      When I try to teach the base of the new node, get the error (Any loaded standard program for node):

      send: 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,st=fail:
read: 3-3-255 s=255,c=3,t=7,pt=0,l=0:
req node id
send: 255-255-255-0 s=255,c=3,t=3,pt=0,l=0,st=fail:
repeater started, id 255
req node id
send: 255-255-255-0 s=255,c=3,t=3,pt=0,l=0,st=fail:
req node id
send: 255-255-255-0 s=255,c=3,t=3,pt=0,l=0,st=fail:
req node id
send: 255-255-255-0 s=255,c=3,t=3,pt=0,l=0,st=fail:
req node id
send: 255-255-255-0 s=255,c=3,t=3,pt=0,l=0,st=fail:

      EEPROM clear did
      This NRF24L01 + PA worked before on another node
      When I load the program to work with radio module - it works :code
      What is the can be a problem?

      posted in Troubleshooting
      Daemon D
      Daemon D
    • RE: Can't tell if time is set with TimeAwareSensor Sketch

      I have the same problem. Work goes through a repeater. Everything works, other than time.

      • Setup:
        sensor started, id=4, parent=0, distance=1
        send: 4-4-0-0 s=255,c=0,t=17,pt=0,l=5,st=fail:1.4.1
        send: 4-4-0-0 s=255,c=3,t=6,pt=1,l=1,st=fail:0
        read: 0-0-4 s=255,c=3,t=6,pt=0,l=1:M
        send: 4-4-0-0 s=255,c=3,t=11,pt=0,l=18,st=fail:Temperature Sensor
        send: 4-4-0-0 s=255,c=3,t=12,pt=0,l=3,st=fail:1.0
        send: 4-4-0-0 s=0,c=0,t=6,pt=0,l=5,st=fail:1.4.1
        lost parent
        find parent
        send: 4-4-255-255 s=255,c=3,t=7,pt=0,l=0,st=bc:
        read: 3-3-4 s=255,c=3,t=8,pt=1,l=1:1
        new parent=3, d=2
        read: 0-0-4 s=255,c=3,t=8,pt=1,l=1:0
        new parent=0, d=1
        send: 0-4-0-4 s=255,c=3,t=8,pt=1,l=1,st=fail:0
        send: 4-4-0-0 s=2,c=0,t=8,pt=0,l=5,st=fail:1.4.1
        send: 4-4-0-0 s=3,c=0,t=3,pt=0,l=5,st=fail:1.4.1
        send: 4-4-0-0 s=4,c=0,t=1,pt=0,l=5,st=fail:1.4.1
        gw.getStatus CHILD_ID_VIRT_Relay: 1
        send: 4-4-0-0 s=255,c=3,t=1,pt=0,l=5,st=fail:1.4.1
        lost parent
        read: 0-0-4 s=255,c=3,t=8,pt=1,l=1:0
        new parent=0, d=1
        requestTemperatures:
        requestTemperatures done:
        temperature done: 13.70
        temperature: 13.70
        send: 4-4-0-0 s=0,c=1,t=0,pt=7,l=5,st=fail:13.7
        send: 4-4-0-0 s=2,c=1,t=4,pt=7,l=5,st=fail:279
        send: 4-4-0-0 s=255,c=3,t=1,pt=1,l=1,st=fail:0
        gw.requestTime:0
      posted in Troubleshooting
      Daemon D
      Daemon D