@sundberg84 Thanks for the quick reply.
I've ordered a protopack, I'll let you know when I receive/test it.

Thanks,
I've found some clues in this threads.
I'll keep looking and post here, if I find something

Just received Rev 8 :

I'll test it asap

Hi
Thank you!
I've used the search fonction but with no luck apparently.

Thanks again for the fast answer.

Hello,

I'm using mysensors 2.0.0-beta with a W5100 ethernet gateway for quite a while now, and I decided to update it to the 2.0.0 stable.

I can't manage to make it work.
On 2.0.0 stable it keeps rebooting

0;255;3;0;9;Starting gateway (RNNGA-, 2.0.0)
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSM:RADIO:OK
0;255;3;0;9;TSM:GW MODE
0;255;3;0;9;TSM:READY
IP: 192.168.0.250
0;255;3;0;9;Starting gateway (RNNGA-, 2.0.0)
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSM:RADIO:OK
0;255;3;0;9;TSM:GW MODE
0;255;3;0;9;TSM:READY
IP: 192.168.0.250
0;255;3;0;9;Starting gateway (RNNGA-, 2.0.0)
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSM:RADIO:OK
0;255;3;0;9;TSM:GW MODE
0;255;3;0;9;TSM:READY
IP: 192.168.0.250
0;255;3;0;9;Starting gateway (RNNGA-, 2.0.0)
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSM:RADIO:OK
0;255;3;0;9;TSM:GW MODE
0;255;3;0;9;TSM:READY
IP: 192.168.0.250

On 2.0.1-beta, il's having a different behavior, if I connect a telnet session it's stop rebooting, but As soon as I try to pass a command (like 0;0;3;0;2;) the telnet session break and the gateway reboot.

I never get the message "Gateway startup complete", is it still send when startup is finished ?

I tried to downgrade to 1.5.4 and it's working, telnet ok. So it's not hardware related.

Am I missing something ?

Unfortunatly I haven't backup my 2.0.0-beta version so I'm quite blocked for the moment

I've the same model, and I used the same method as @sundberg84 (de-soldering led and reg).
It works fine.
I've never tested to cut the tracks.

@sundberg84 - Yes I know that I can cut that part, but I think this one will be my test board with all this option, including the battery parts.
However I'll keep the video method in mind, I was thinking about using a dremel, but, it seems cleaner.

Looks good!

and works fine!

Perfect, thanks again

I'll test the batt version as soon as I receive the boosters.

Ok, I'll do that.
My main problem is that I haven't received both my booster and my 5->3.3 reg.
So I can test Batt version by bypassing the booster, but it will not tell us if the reg placement is ok.
I'll dig in my "donor harware" if I can find a reg.

Just received Rev 8 :

I'll test it asap

@Yveaux
Very nice! Thx

@Yveaux pianos ?
In my house, it's more likely to be too humid than too dry

Hello,

I use it to control my heater and my AC.
I plan to use it to control the vents in the bathroom (temp sensor on the hot water hose to ensure a quick response and turn on vents before humidity start to rise).