Navigation

    • Register
    • Login
    • OpenHardware.io
    • Categories
    • Recent
    • Tags
    • Popular
    1. Home
    2. NailMan
    • Profile
    • Following
    • Followers
    • Topics
    • Posts
    • Best
    • Groups

    NailMan

    @NailMan

    0
    Reputation
    3
    Posts
    217
    Profile views
    0
    Followers
    0
    Following
    Joined Last Online

    NailMan Follow

    Best posts made by NailMan

    This user hasn't posted anything yet.

    Latest posts made by NailMan

    • RE: 💬 Sensebender Micro

      @tbowmo
      I apologize for the delay in replying, I was very busy with work.

      It turned out to be some mystical incompatibility of the FTDI and Sensbender Micro or a device based on its loader. Three versions of my FTDI refused to work with Sensbender Micro, but they worked with regular Arduino, and the fourth one, bought on AliExpress, works perfectly normal. Externally, all the same, only those that do not work with Sensbender Micro, the labeling of the chip differs slightly in the quality of engraving on the plastic.

      Maybe it's fake or some kind of non-standard chips.

      posted in OpenHardware.io
      NailMan
      NailMan
    • RE: 💬 Sensebender Micro

      @tbowmo
      Yes, of course, I chose the target device "Sensebender Micro -> "Atmega328p, 1mhz" and "Atmega328p, 8mhz"(for device (RGBW controller) based on SB Micro with 8Mhz quartz resonator).

      I tried three different FTDIs.

      With any other Arduino (with native loaders) there are no problems with these FTDI adapters.

      posted in OpenHardware.io
      NailMan
      NailMan
    • RE: 💬 Sensebender Micro

      Hello!

      Help me understand why the sketches are not loaded in Sensebender Micro - there is a synchronization error:
      avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x82
      ....
      avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x82
      avrdude: stk500_recv(): programmer is not responding

      • FTDI connected via 3.3V jumper

      • Another device built on the SB Micro with SB bootloader is also not flashed with the same error, but on the PC of my friend, sketches successfully loaded into the device and on my PC are given the correct data when working sketch

      • device and serial port are selected correctly

      • mySensors Lib and device packs(AVR, SAMD) installed with standard lib and device managers(and also added path https://raw.githubusercontent.com/mysensors/ArduinoBoards/master/package_mysensors.org_index.json in the settings menu)

      • at the same time if I take a pure Pro Mini and load into it any sample sketch of mySensors package - it will successfully do it and will work.

      What am I doing wrong and how do I get the Sensebender Micro to take sketches?

      posted in OpenHardware.io
      NailMan
      NailMan