It is working now.
If I have to send the value as a string and not int will it work if i send string values of temperature where it should be a int ?
That will be my next test
@BartE thank you very much for the help.
It is working now.
If I have to send the value as a string and not int will it work if i send string values of temperature where it should be a int ?
That will be my next test
@BartE thank you very much for the help.
thnaks @BartE .
I will give a try.
I found some topic in the forum that there is a problem with the ESP8266 GW code.
The Development Code fix some bugs in the gateway. Is it something related to this issue ?
Hello,
I just build a ESP8266 GW connected to my Vera Ui7 so far so good, made a sensor Relay, perfect it worked well,
But now when I try to build a Door, Window and Push-button Sensor i don´t get any event triggering in Vera.
I detect the sensor correct in devices, i can see 2 devices (arduino node 4 and Arduino motion 3 (4) ) i see that arduino node 4 "Last update" changes datetime when i change the sensor pinout (button) but somehow my scene doesn´t work.
I have a small scene where when Arduino Motion 3(4) detect motion armed or not it should turn on a Lamp but nothing happens, even in the log file from VERA i see that " Evaluate 4 scene Test Sensor is false " i always get false.
Does nyone understands why?
Am I missing something.
Thank you for your help.
Regards
Sensor Code:
#include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>
#define CHILD_ID 3
#define BUTTON_PIN 3 // Arduino Digital I/O pin for button/reed switch
MySensor gw;
Bounce debouncer = Bounce();
int oldValue=-1;
// Change to V_LIGHT if you use S_LIGHT in presentation below
MyMessage msg(CHILD_ID,V_TRIPPED);
void setup()
{
gw.begin();
// Setup the button
pinMode(BUTTON_PIN,INPUT);
// Activate internal pull-up
digitalWrite(BUTTON_PIN,HIGH);
// After setting up the button, setup debouncer
debouncer.attach(BUTTON_PIN);
debouncer.interval(5);
// Register binary input sensor to gw (they will be created as child devices)
// You can use S_DOOR, S_MOTION or S_LIGHT here depending on your usage.
// If S_LIGHT is used, remember to update variable type you send in. See "msg" above.
gw.present(CHILD_ID, S_MOTION);
}
// Check if digital input has changed and send in new value
void loop()
{
debouncer.update();
// Get the update value
int value = debouncer.read();
if (value != oldValue) {
// Send in the new value
gw.send(msg.set(value==HIGH ? 1 : 0));
oldValue = value;
}
}
Scene Vera:
Log in VERA:
AlarmManager::AddRelativeAlarm current time 1456336378 delay 0 type 45 <0x7502e520>
AlarmManager::AddAbsoluteAlarm alarm 0xb36dc8 entry 0xd72f60 id 322 type 45 param=(nil) entry->when: 1456336378 time: 1456336378 bCancelFirst 0=0 <0x7502e520>
AlarmManager::Run 0xb36dc8 notified of a change entry 0x10200a0 id 312 deleted 0 <0x77a2e520>
AlarmManager::Run callback for alarm 0xb36dc8 entry 0xd72f60 type 45 id 322 param=(nil) entry->when: 1456336378 time: 1456336378 tnum: 1 slow 0 tardy 0 <0x77a2e520>
AlarmManager::Run finish callback for alarm 0xb36dc8 entry 0xd72f60 type 45 id 322 param=(nil) entry->when: 1456336378 time: 1456336378 tnum: 1 slow 0 duration 0 <0x77a2e520>
AlarmManager::Run 0xb36dc8 notified of a change entry 0x110fb78 id 303 deleted 0 <0x7782e520>
Device_Variable::m_szValue_set device: 88 service: urn:micasaverde-com:serviceId:SecuritySensor1 variable: [35;1mTripped[0m was: 536870913 now: 536870912 #hooks: 1 upnp: 0 skip: 1 v:0xc49ad8/NONE duplicate:0 <0x7502e520>
UserData::m_iDataVersion_Variables_incr Tripped user data 335633001 variables 335633212 <0x7502e520>
UserData::DataIsDirty UpdateStateList was 1 incr 0 user data 335633001 variables 335633212 <0x7502e520>
Device_Variable::m_szValue_set device: 88 VV: 1 <0x7502e520>
Event::Evaluate 4 scene Test Sensor is false repeat 0/-1 <0x7502e520>