Jeedom

view Thank you for the link I'll head in that direction feedback after testing

Hi, For MQTT in Jeedom you must use another plugin, you have mainly two choices : MQTT plugin by lunarok or jMQTT by domotruc. Check the market for those.

Thanks but when you've added the MySensors plugin, how to configure the gateway in the MySensors configuration page of Jeedom ?

Hello, Someone can answer me? My version of jeedom is 3.1.7 Thanks in advance

@Banenabos - if you have a situation where the GW is just within reach, if the node during some circumstances does not reach the GW it will after 6 (?) tries start to search for a new way. In this way it might be the node hops back and forth between the GW and Repeater->GW. I dont know whats the best practice is but when I had these situations i forced the ID to the repeater which was closest and most solid connection. Not very knowing in the code but above is based on observation and what works best for me. For example my rain/bucket sensor which is located in the garden can sometimes reach the GW directly but I lost connection to it back and forth. I added a repeater but for some reason it preferred the GW directly (less hops?) and lost connection over and over so I force it to use the repeater.

Hello, Hallelujah, I managed to get everything working perfect. Shame on me :kissing_closed_eyes: The main problem came from a bad definition of the internal address (Network configuration section), in particular the "complementary" part of the address (/jeedom) which was not to be defined for me (check your URL Jeedom access to be sure). So I have : http://jeedom:80 where "jeedom" is 127.0.1.1 (as to be defined in /etc/hosts). Hope this help. Eric.

@fredmet8 As mentioned by @minscof you have to check your network configuration. Verify it's ok and then we can look for something else :) I never configured IP in the MySensors plugin ! David.

@filoucaenais I starting to play with Jeedom but I am not getting my sensor to display Do Jeedom have an auto discovery? As per the Main Plugin MySensor Ethernet gateway is up and running but when I goto the Plugins Automation Protocols Mysensors there is no nodes showing up why will this be the case? [image: upload-aea93760-2899-4193-857c-e4331f2773de] [image: upload-90f037e0-db68-41e9-8de5-1d62bfcbaee3]