Solar - Temperature, Humidiy & Pressure board with charge monitoring
-
I was not able to resist the new ceech board the and the lucky one to receive the fully populated samples last week.
The board incorporates the hardware to solar charge a li-ion cell including the measurements for voltage & current of both solar and cell.
To test the board I dismantled a cheap solar garden light and connected a CR123 li-ion cell.
The result
For testing purposed I found that it works well to connect a HC-05 bluetooth module and use a mobile phone with bluetooth terminal to read the serial port. This way I don't need to carry a PC around the house. You can see the board producing it's intelligence :satisfied:
and the sketch which is communicating with the MySensors network
-
I'm impressed. Nice work.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login